[Fri May 18 09:24:14 2012] Detection parameters:
  Position = (322.6, 306.9) = 19 21 9.73 -58 40 48.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 796.5 +/- 43.2
  Background counts = 23.6
  Rate = 0.03 +/- 0.002

[Fri May 18 09:24:15 2012] Off-axis axis estimate = 1.86'
[Fri May 18 13:53:58 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Fri May 18 13:53:58 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Fri May 18 13:53:58 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.729
[Fri May 18 13:53:58 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.36"
[Fri May 18 19:05:33 2012] fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_src2.ximg exists
[Fri May 18 19:05:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_src2.csv
[Fri May 18 19:05:33 2012] fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri May 18 19:05:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_src2.csv
[Fri May 18 19:05:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 19:05:34 2012] fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri May 18 19:05:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri May 18 19:05:34 2012] fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri May 18 19:05:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri May 18 19:05:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 19:06:09 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.109850 pixels away
[Fri May 18 19:06:09 2012] Vigneting correction estimate = 1.000000
[Fri May 18 19:06:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 19:06:09 2012] Assessing source extent using major
[Fri May 18 19:06:09 2012] Source does appear to be extended
[Fri May 18 19:06:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 19:06:09 2012] Source is confused with source 4
[Fri May 18 21:43:12 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Fri May 18 21:43:12 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Fri May 18 21:43:12 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.729
[Fri May 18 21:43:12 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.36"
[Sat May 19 06:33:27 2012] fullrun_mos2_xmm0503750301_pi300-10000_cl_pass1_src2.ximg exists
[Sat May 19 06:33:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750301_pi300-10000_cl_pass1_src2.csv
[Sat May 19 06:33:27 2012] fullrun_mos2_xmm0503750301_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat May 19 06:33:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750301_pi300-10000_cl_pass1_src2.csv
[Sat May 19 06:33:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503750301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503750301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 06:33:28 2012] fullrun_mos2_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat May 19 06:33:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat May 19 06:33:28 2012] fullrun_mos2_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat May 19 06:33:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat May 19 06:33:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 06:33:41 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.096244 pixels away
[Sat May 19 06:33:41 2012] Spatial fit model total counts = 24283.900000, observed total counts = 22357.000000
[Sat May 19 06:33:41 2012] Offset between fit and detection position for source 3 = 6.633271 pixels
[Sat May 19 06:33:41 2012] Warning, changing simple spatial fit ID from 2 to 3
[Sat May 19 06:33:41 2012] 19826.570000 total counts/ 6467.970000 bgd. counts: snr = 166.102798
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 6.633271 pixels
  Position = (318.1, 311.7) = 19 21 12.26 -58 40 25.5
  Extent = 15.0 (15.0-30.0)", rotation angle = 0
  Source counts = 13358.6 +/- 140.8
  Background counts = 6468.0
  Rate = 0.4 +/- 0.005
[Sat May 19 06:33:41 2012] Spatial fit model total counts = 14804.700000, observed total counts = 17910.000000
[Sat May 19 06:33:41 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 19 06:33:41 2012] Vigneting correction estimate = 1.000000
[Sat May 19 06:33:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 06:33:41 2012] Assessing source extent using major axis lower bound
[Sat May 19 06:33:41 2012] Source does appear to be extended
[Sat May 19 06:33:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 20:42:13 2012] Counts = 13358.600000, rescaling region sizes by 3.000000
[Sat May 19 20:42:13 2012] XMMSAS src. selection expression = ellipse(27625.700000, 27070.229400, 2703.816078, 2703.816078, 0.000000, X, Y)
[Sat May 19 20:42:13 2012] Writing source region out to fullrun_mos2_xmm0503750301_pi300-10000_pass1_cl_src3_src.reg
[Sat May 19 20:42:13 2012] Extracting stamp from image fullrun_mos2_xmm0503750301_pi300-10000_cl_sm2.00.img.gz, (163, 156) - (473, 467)
[Sat May 19 20:42:13 2012] XMMSAS bgd. selection expression = annulus(27625.700000, 27070.229400, 13519.080389, 27038.160778, X, Y) && !ellipse(27312.220600, 27342.890520, 2131.444861, 2131.444861, 0.000000, X, Y) && !ellipse(28269.556610, 27011.842682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28220.149170, 27777.481445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28592.072000, 25007.270000, 1433.472041, 670.691219, 90.000000, X, Y) && !ellipse(17860.757187, 21435.533768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25097.555000, 27185.256800, 1133.352033, 1133.352033, 0.000000, X, Y) && !ellipse(28445.356720, 28572.052063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28566.494000, 24872.114000, 680.320020, 680.320020, 0.000000, X, Y) && !ellipse(25537.036000, 27887.003800, 1173.272034, 261.679208, 23.206300, X, Y) && !ellipse(25160.642000, 26281.319600, 1105.624032, 1105.624032, 0.000000, X, Y) && !ellipse(25347.899000, 29139.824400, 969.200028, 969.200028, 0.000000, X, Y) && !ellipse(26810.918800, 24755.216000, 1152.712033, 1152.712033, 0.000000, X, Y)
[Sat May 19 20:42:13 2012] Writing fullrun_mos2_xmm0503750301_pi300-10000_pass1_cl_src3.gif
[Sat May 19 20:47:51 2012] Mean detx,y = (-66.20, -115.30) 
[Sat May 19 20:47:53 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 20:58:13 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 20:58:13 2012] Setting source spectrum file to fullrun_mos2_xmm0503750301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat May 19 20:58:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503750301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat May 19 21:44:47 2012] Updating aperture counts using extracted products
[Sat May 19 21:44:47 2012] Error reading totcts from fullrun_mos2_xmm0503750301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat May 19 21:44:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 21:44:47 2012] Using photon index=1.80, rate=0.442, arf fullrun_mos2_xmm0503750301_pi300-10000_pass1_cl_src3.arf
[Sat May 19 21:44:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 21:44:47 2012] Updating source flux to 3.8e-12
[Sat May 19 21:45:19 2012] Flag p found in src. 3 procflags, skipping spectral fitting
[Sat May 19 21:45:19 2012] Flag c found in src. 3 procflags, skipping spectral fitting