[Fri May 18 09:24:15 2012] Detection parameters:
  Position = (321.5, 352.0) = 19 21 10.35 -58 37 31.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.5 +/- 10.9
  Background counts = 18.0
  Rate = 0.002 +/- 0.0005

[Fri May 18 09:24:15 2012] Off-axis axis estimate = 4.23'
[Fri May 18 13:53:58 2012] Using EEF radius (= 8.54 ")to estimate initial spatial extent for simple fitting
[Fri May 18 13:53:58 2012] Initial guess for spatial extent in simple fitting = 8.54"
[Fri May 18 13:53:58 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.030
[Fri May 18 13:53:58 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 8.54"
[Fri May 18 19:05:34 2012] fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_src25.ximg exists
[Fri May 18 19:05:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_src25.csv
[Fri May 18 19:05:34 2012] fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_src25_1.ximg exists
[Fri May 18 19:05:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_src25.csv
[Fri May 18 19:05:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 19:05:34 2012] fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Fri May 18 19:05:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src25.csv
[Fri May 18 19:05:34 2012] fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Fri May 18 19:05:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src25.csv
[Fri May 18 19:05:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 19:06:09 2012] Source 23 is offset by -7.314169 and 6.808767 pixels which is larger than
2 X fitted extent = 0.981798 x 0.981798, not incorporating fit results
[Fri May 18 19:06:09 2012] Spatial fit model total counts = 334.296000, observed total counts = 301.000000
[Fri May 18 19:06:09 2012] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 18 19:06:09 2012] Vigneting correction estimate = 1.000000
[Fri May 18 19:06:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 19:06:09 2012] Assessing source extent using major
[Fri May 18 19:06:09 2012] Source does appear to be extended
[Fri May 18 19:06:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 19:06:09 2012] Deleting source due to low Poisson probability 0.9