[Fri May 18 09:24:14 2012] Detection parameters:
  Position = (314.9, 314.8) = 19 21 14.02 -58 40 12.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108571.8 +/- 384.8
  Background counts = 22.6
  Rate = 4 +/- 0.02

[Fri May 18 09:24:15 2012] Off-axis axis estimate = 1.69'
[Fri May 18 13:53:58 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Fri May 18 13:53:58 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Fri May 18 13:53:58 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Fri May 18 13:53:58 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Fri May 18 19:05:33 2012] fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 18 19:05:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_src1.csv
[Fri May 18 19:05:33 2012] fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 18 19:05:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_src1.csv
[Fri May 18 19:05:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 19:05:34 2012] fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 18 19:05:34 2012] fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 18 19:05:34 2012] Fit fullrun_mos2_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri May 18 19:06:09 2012] Spatial fit model total counts = 111876.000000, observed total counts = 109695.000000
[Fri May 18 19:06:09 2012] Offset between fit and detection position for source 2 = 0.280697 pixels
[Fri May 18 19:06:09 2012] 111513.800000 total counts/ 25600.000000 bgd. counts: snr = 536.961250
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.280697 pixels
  Position = (314.7, 314.7) = 19 21 14.15 -58 40 12.7
  Extent = 7.6 (7.6-7.6)", rotation angle = 0
  Source counts = 85913.8 +/- 333.9
  Background counts = 25600.0
  Rate = 3 +/- 0.01
[Fri May 18 19:06:09 2012] Vigneting correction estimate = 1.000000
[Fri May 18 19:06:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 19:06:09 2012] Assessing source extent using major axis lower bound
[Fri May 18 19:06:09 2012] Source does appear to be extended
[Fri May 18 19:06:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 21:43:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 18 21:43:12 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Fri May 18 21:43:12 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.233
[Fri May 18 21:43:12 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.62"
[Sat May 19 06:33:27 2012] fullrun_mos2_xmm0503750301_pi300-10000_cl_pass1_src1.ximg exists
[Sat May 19 06:33:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750301_pi300-10000_cl_pass1_src1.csv
[Sat May 19 06:33:27 2012] fullrun_mos2_xmm0503750301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat May 19 06:33:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750301_pi300-10000_cl_pass1_src1.csv
[Sat May 19 06:33:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503750301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503750301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 06:33:28 2012] fullrun_mos2_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat May 19 06:33:28 2012] fullrun_mos2_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat May 19 06:33:28 2012] Fit fullrun_mos2_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat May 19 06:33:41 2012] Spatial fit model total counts = 119090.000000, observed total counts = 110176.000000
[Sat May 19 06:33:41 2012] Offset between fit and detection position for source 2 = 0.288799 pixels
[Sat May 19 06:33:41 2012] 117800.200000 total counts/ 25600.000000 bgd. counts: snr = 576.251250
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.288799 pixels
  Position = (314.5, 314.8) = 19 21 14.27 -58 40 11.9
  Extent = 8.9 (8.9-8.9)", rotation angle = 0
  Source counts = 92200.2 +/- 343.2
  Background counts = 25600.0
  Rate = 3 +/- 0.01
[Sat May 19 06:33:41 2012] Vigneting correction estimate = 1.000000
[Sat May 19 06:33:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 06:33:41 2012] Assessing source extent using major axis lower bound
[Sat May 19 06:33:41 2012] Source does appear to be extended
[Sat May 19 06:33:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 06:33:41 2012] Source is confused with source 3
[Sat May 19 20:42:13 2012] Counts = 92200.200000, rescaling region sizes by 3.000000
[Sat May 19 20:42:13 2012] XMMSAS src. selection expression = ellipse(27312.220600, 27342.890520, 1598.583646, 1598.583646, 0.000000, X, Y)
[Sat May 19 20:42:13 2012] Writing source region out to fullrun_mos2_xmm0503750301_pi300-10000_pass1_cl_src2_src.reg
[Sat May 19 20:42:13 2012] Extracting stamp from image fullrun_mos2_xmm0503750301_pi300-10000_cl_sm2.00.img.gz, (223, 223) - (406, 407)
[Sat May 19 20:42:13 2012] XMMSAS bgd. selection expression = annulus(27312.220600, 27342.890520, 7992.918230, 15985.836460, X, Y) && !ellipse(27625.700000, 27070.229400, 3605.088104, 3605.088104, 0.000000, X, Y) && !ellipse(28269.556610, 27011.842682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28220.149170, 27777.481445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28592.072000, 25007.270000, 1433.472041, 670.691219, 90.000000, X, Y) && !ellipse(17860.757187, 21435.533768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25097.555000, 27185.256800, 1133.352033, 1133.352033, 0.000000, X, Y) && !ellipse(28445.356720, 28572.052063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28566.494000, 24872.114000, 680.320020, 680.320020, 0.000000, X, Y) && !ellipse(25537.036000, 27887.003800, 1173.272034, 261.679208, 23.206300, X, Y) && !ellipse(25160.642000, 26281.319600, 1105.624032, 1105.624032, 0.000000, X, Y) && !ellipse(25347.899000, 29139.824400, 969.200028, 969.200028, 0.000000, X, Y) && !ellipse(26810.918800, 24755.216000, 1152.712033, 1152.712033, 0.000000, X, Y)
[Sat May 19 20:42:13 2012] Writing fullrun_mos2_xmm0503750301_pi300-10000_pass1_cl_src2.gif
[Sat May 19 20:42:24 2012] Mean detx,y = (-48.94, -87.47) 
[Sat May 19 20:42:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 20:47:39 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 20:47:40 2012] Setting source spectrum file to fullrun_mos2_xmm0503750301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat May 19 20:47:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503750301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat May 19 21:44:47 2012] Updating aperture counts using extracted products
[Sat May 19 21:44:47 2012] Error reading totcts from fullrun_mos2_xmm0503750301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat May 19 21:44:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 21:44:47 2012] Using photon index=1.80, rate=3.05, arf fullrun_mos2_xmm0503750301_pi300-10000_pass1_cl_src2.arf
[Sat May 19 21:44:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 21:44:47 2012] Updating source flux to 2.7e-11
[Sat May 19 21:45:19 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Sat May 19 21:46:34 2012] Reading fit data from xmm0503750301/analysis//spectral/fullrun_mos2_xmm0503750301_pi300-10000_pass1_cl_src2_pl.csv
[Sat May 19 21:46:34 2012] Spectral fit parameter nH value = 2.07267e+20
[Sat May 19 21:46:34 2012] Spectral fit parameter PhoIndex value = 1.99261
[Sat May 19 21:46:34 2012] Failed to get F(0.3-8.0) from xmm0503750301/analysis//spectral/fullrun_mos2_xmm0503750301_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat May 19 21:46:34 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 21:46:34 2012] Using Nh = 2.1e+20, photon index=1.99, rate=3.05, arf fullrun_mos2_xmm0503750301_pi300-10000_pass1_cl_src2.arf
[Sat May 19 21:46:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 21:46:34 2012] Updating source flux to 2.5e-11