[Fri May 18 09:23:36 2012] Detection parameters:
  Position = (286.5, 312.9) = 19 21 29.89 -58 40 20.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 230.5 +/- 21.5
  Background counts = 20.4
  Rate = 0.01 +/- 0.0009

[Fri May 18 09:23:37 2012] Off-axis axis estimate = 1.36'
[Fri May 18 12:58:46 2012] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Fri May 18 12:58:46 2012] Initial guess for spatial extent in simple fitting = 7.11"
[Fri May 18 12:58:46 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.098
[Fri May 18 12:58:46 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.11"
[Fri May 18 13:53:57 2012] fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_src3.ximg exists
[Fri May 18 13:53:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_src3.csv
[Fri May 18 13:53:57 2012] fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri May 18 13:53:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_src3.csv
[Fri May 18 13:53:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 13:53:58 2012] fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri May 18 13:53:58 2012] fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri May 18 13:53:58 2012] Fit fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri May 18 19:06:00 2012] Warning, spatial fit 3 centroid is now closest to src. 18
[Fri May 18 19:06:00 2012] Vigneting correction estimate = 1.000000
[Fri May 18 19:06:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 19:06:00 2012] Assessing source extent using major
[Fri May 18 19:06:00 2012] Source does appear to be extended
[Fri May 18 19:06:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 21:23:55 2012] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Fri May 18 21:23:55 2012] Initial guess for spatial extent in simple fitting = 7.11"
[Fri May 18 21:23:55 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.098
[Fri May 18 21:23:55 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.11"
[Fri May 18 21:43:12 2012] fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_src3.ximg exists
[Fri May 18 21:43:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_src3.csv
[Fri May 18 21:43:12 2012] fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri May 18 21:43:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_src3.csv
[Fri May 18 21:43:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 21:43:12 2012] fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri May 18 21:43:12 2012] fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri May 18 21:43:12 2012] Fit fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat May 19 06:33:38 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 95.843944 pixels away
[Sat May 19 06:33:38 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.255303 pixels away
[Sat May 19 06:33:38 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 22.928090 pixels away
[Sat May 19 06:33:38 2012] Vigneting correction estimate = 1.000000
[Sat May 19 06:33:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 06:33:38 2012] Assessing source extent using major
[Sat May 19 06:33:38 2012] Source does appear to be extended
[Sat May 19 06:33:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 20:14:30 2012] XMMSAS src. selection expression = ellipse(24875.316711, 27174.577393, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 19 20:14:30 2012] Writing source region out to fullrun_mos1_xmm0503750301_pi300-10000_pass1_cl_src3_src.reg
[Sat May 19 20:14:30 2012] Extracting stamp from image fullrun_mos1_xmm0503750301_pi300-10000_cl_sm2.00.img.gz, (249, 275) - (324, 350)
[Sat May 19 20:14:30 2012] XMMSAS bgd. selection expression = annulus(24875.316711, 27174.577393, 1087.500000, 2175.000000, X, Y) && !ellipse(27328.529200, 27314.816000, 1819.188052, 1819.188052, 0.000000, X, Y) && !ellipse(25713.736000, 27826.134000, 1173.104034, 1173.104034, 0.000000, X, Y)
[Sat May 19 20:14:30 2012] Writing fullrun_mos1_xmm0503750301_pi300-10000_pass1_cl_src3.gif
[Sat May 19 20:19:48 2012] Mean detx,y = (-306.49, -2400.64) 
[Sat May 19 20:19:49 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 20:19:57 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 20:19:57 2012] Setting source spectrum file to fullrun_mos1_xmm0503750301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat May 19 20:19:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503750301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat May 19 20:35:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 19 20:35:28 2012] rmf not generated due to insufficient counts
[Sat May 19 21:44:47 2012] Updating aperture counts using extracted products
[Sat May 19 21:44:47 2012] Error reading totcts from fullrun_mos1_xmm0503750301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat May 19 21:44:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 21:44:47 2012] Using photon index=1.80, rate=0.00963, arf fullrun_mos1_xmm0503750301_pi300-10000_pass1_cl_src3.arf
[Sat May 19 21:44:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 21:44:47 2012] Updating source flux to 9.9e-14
[Sat May 19 21:44:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting