[Fri May 18 09:23:37 2012] Detection parameters:
  Position = (290.9, 322.2) = 19 21 27.44 -58 39 38.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.4 +/- 17.1
  Background counts = 20.9
  Rate = 0.004 +/- 0.0007

[Fri May 18 09:23:37 2012] Off-axis axis estimate = 1.81'
[Fri May 18 12:58:46 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Fri May 18 12:58:46 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Fri May 18 12:58:46 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.837
[Fri May 18 12:58:46 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.33"
[Fri May 18 13:53:58 2012] fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_src7.ximg exists
[Fri May 18 13:53:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_src7.csv
[Fri May 18 13:53:58 2012] fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri May 18 13:53:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_src7.csv
[Fri May 18 13:53:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 13:53:58 2012] fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri May 18 13:53:58 2012] fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri May 18 13:53:58 2012] Fit fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri May 18 19:06:00 2012] Spatial fit model total counts = 769.790000, observed total counts = 767.000000
[Fri May 18 19:06:00 2012] Offset between fit and detection position for source 15 = 5.539705 pixels
[Fri May 18 19:06:00 2012] 774.569000 total counts/ 544.546000 bgd. counts: snr = 9.857209
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 5.539705 pixels
  Position = (296.1, 320.4) = 19 21 24.51 -58 39 47.8
  Extent = 14.7 (14.6-29.3)", rotation angle = 0
  Source counts = 230.0 +/- 27.8
  Background counts = 544.5
  Rate = 0.008 +/- 0.0009
[Fri May 18 19:06:00 2012] Vigneting correction estimate = 1.000000
[Fri May 18 19:06:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 19:06:00 2012] Assessing source extent using major axis lower bound
[Fri May 18 19:06:00 2012] Source does appear to be extended
[Fri May 18 19:06:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 21:23:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 18 21:23:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 18 21:23:55 2012] Initial guess for spatial extent in simple fitting = 14.66"
[Fri May 18 21:23:55 2012] source mask rpix=3.4, npix_max = 59, mask sum = 56, frac = 0.934
[Fri May 18 21:23:55 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 14.66"
[Fri May 18 21:43:12 2012] fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_src5.ximg exists
[Fri May 18 21:43:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_src5.csv
[Fri May 18 21:43:12 2012] fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri May 18 21:43:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_src5.csv
[Fri May 18 21:43:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 21:43:12 2012] fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri May 18 21:43:12 2012] fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri May 18 21:43:12 2012] Fit fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat May 19 06:33:38 2012] Warning, spatial fit 5 centroid is now closest to src. 3
[Sat May 19 06:33:38 2012] Vigneting correction estimate = 1.000000
[Sat May 19 06:33:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 06:33:38 2012] Assessing source extent using major axis lower bound
[Sat May 19 06:33:38 2012] Source does appear to be extended
[Sat May 19 06:33:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 20:14:30 2012] XMMSAS src. selection expression = ellipse(25713.736000, 27826.134000, 879.828025, 879.828025, 0.000000, X, Y)
[Sat May 19 20:14:30 2012] Writing source region out to fullrun_mos1_xmm0503750301_pi300-10000_pass1_cl_src15_src.reg
[Sat May 19 20:14:30 2012] Extracting stamp from image fullrun_mos1_xmm0503750301_pi300-10000_cl_sm2.00.img.gz, (246, 270) - (347, 371)
[Sat May 19 20:14:30 2012] XMMSAS bgd. selection expression = annulus(25713.736000, 27826.134000, 1466.380042, 2932.760084, X, Y) && !ellipse(27328.529200, 27314.816000, 1819.188052, 1819.188052, 0.000000, X, Y) && !ellipse(24875.316711, 27174.577393, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 19 20:14:30 2012] Writing fullrun_mos1_xmm0503750301_pi300-10000_pass1_cl_src15.gif
[Sat May 19 20:20:01 2012] Mean detx,y = (341.17, -1407.82) 
[Sat May 19 20:20:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 20:20:12 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 20:20:12 2012] Setting source spectrum file to fullrun_mos1_xmm0503750301_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat May 19 20:20:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503750301_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sat May 19 21:44:47 2012] Updating aperture counts using extracted products
[Sat May 19 21:44:47 2012] Error reading totcts from fullrun_mos1_xmm0503750301_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat May 19 21:44:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 21:44:47 2012] Using photon index=1.80, rate=0.00761, arf fullrun_mos1_xmm0503750301_pi300-10000_pass1_cl_src15.arf
[Sat May 19 21:44:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 21:44:47 2012] Updating source flux to 7.2e-14