[Fri May 18 09:23:36 2012] Detection parameters:
  Position = (314.8, 314.2) = 19 21 14.08 -58 40 13.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 119482.6 +/- 411.4
  Background counts = 25.3
  Rate = 5 +/- 0.02

[Fri May 18 09:23:37 2012] Off-axis axis estimate = 1.65'
[Fri May 18 12:58:46 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Fri May 18 12:58:46 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Fri May 18 12:58:46 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Fri May 18 12:58:46 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Fri May 18 13:53:57 2012] fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 18 13:53:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_src1.csv
[Fri May 18 13:53:57 2012] fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 18 13:53:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_src1.csv
[Fri May 18 13:53:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 13:53:58 2012] fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 18 13:53:58 2012] fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 18 13:53:58 2012] Fit fullrun_mos1_xmm0503750301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri May 18 19:06:00 2012] Spatial fit model total counts = 116784.000000, observed total counts = 117081.000000
[Fri May 18 19:06:00 2012] Offset between fit and detection position for source 1 = 0.323715 pixels
[Fri May 18 19:06:00 2012] 116811.500000 total counts/ 25600.000000 bgd. counts: snr = 570.071875
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.323715 pixels
  Position = (314.7, 314.5) = 19 21 14.15 -58 40 13.3
  Extent = 7.6 (7.6-7.6)", rotation angle = 0
  Source counts = 91211.5 +/- 341.8
  Background counts = 25600.0
  Rate = 3 +/- 0.01
[Fri May 18 19:06:00 2012] Vigneting correction estimate = 1.000000
[Fri May 18 19:06:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 19:06:00 2012] Assessing source extent using major axis lower bound
[Fri May 18 19:06:00 2012] Source does appear to be extended
[Fri May 18 19:06:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 21:23:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 18 21:23:55 2012] Initial guess for spatial extent in simple fitting = 7.60"
[Fri May 18 21:23:55 2012] source mask rpix=1.7, npix_max = 20, mask sum = 25, frac = 1.239
[Fri May 18 21:23:55 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.60"
[Fri May 18 21:43:12 2012] fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 18 21:43:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_src1.csv
[Fri May 18 21:43:12 2012] fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 18 21:43:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_src1.csv
[Fri May 18 21:43:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 21:43:12 2012] fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 18 21:43:12 2012] fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 18 21:43:12 2012] Fit fullrun_mos1_xmm0503750301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat May 19 06:33:38 2012] Spatial fit model total counts = 116273.000000, observed total counts = 116648.000000
[Sat May 19 06:33:38 2012] Offset between fit and detection position for source 1 = 0.020604 pixels
[Sat May 19 06:33:38 2012] 116604.700000 total counts/ 25600.000000 bgd. counts: snr = 568.779375
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.020604 pixels
  Position = (314.7, 314.5) = 19 21 14.16 -58 40 13.3
  Extent = 7.6 (7.5-7.6)", rotation angle = 0
  Source counts = 91004.7 +/- 341.5
  Background counts = 25600.0
  Rate = 3 +/- 0.01
[Sat May 19 06:33:38 2012] Vigneting correction estimate = 1.000000
[Sat May 19 06:33:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 06:33:38 2012] Assessing source extent using major axis lower bound
[Sat May 19 06:33:38 2012] Source does appear to be extended
[Sat May 19 06:33:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 20:14:29 2012] Counts = 91004.700000, rescaling region sizes by 3.000000
[Sat May 19 20:14:29 2012] XMMSAS src. selection expression = ellipse(27328.529200, 27314.816000, 1364.391039, 1364.391039, 0.000000, X, Y)
[Sat May 19 20:14:29 2012] Writing source region out to fullrun_mos1_xmm0503750301_pi300-10000_pass1_cl_src1_src.reg
[Sat May 19 20:14:29 2012] Extracting stamp from image fullrun_mos1_xmm0503750301_pi300-10000_cl_sm2.00.img.gz, (236, 236) - (393, 393)
[Sat May 19 20:14:30 2012] XMMSAS bgd. selection expression = annulus(27328.529200, 27314.816000, 6821.955196, 13643.910393, X, Y) && !ellipse(17809.428400, 21411.563000, 554.330416, 554.330416, 0.000000, X, Y) && !ellipse(24875.316711, 27174.577393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25713.736000, 27826.134000, 1173.104034, 1173.104034, 0.000000, X, Y)
[Sat May 19 20:14:30 2012] Writing fullrun_mos1_xmm0503750301_pi300-10000_pass1_cl_src1.gif
[Sat May 19 20:14:40 2012] Mean detx,y = (124.14, -92.56) 
[Sat May 19 20:14:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 20:19:33 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 20:19:33 2012] Setting source spectrum file to fullrun_mos1_xmm0503750301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 19 20:19:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503750301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat May 19 21:44:47 2012] Updating aperture counts using extracted products
[Sat May 19 21:44:47 2012] Error reading totcts from fullrun_mos1_xmm0503750301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 19 21:44:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 21:44:47 2012] Using photon index=1.80, rate=3.01, arf fullrun_mos1_xmm0503750301_pi300-10000_pass1_cl_src1.arf
[Sat May 19 21:44:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 21:44:47 2012] Updating source flux to 2.6e-11
[Sat May 19 21:45:19 2012] Reading fit data from xmm0503750301/analysis//spectral/fullrun_mos1_xmm0503750301_pi300-10000_pass1_cl_src1_pl.csv
[Sat May 19 21:45:19 2012] Spectral fit parameter nH value = 1.77616e+20
[Sat May 19 21:45:19 2012] Spectral fit parameter PhoIndex value = 2.01696
[Sat May 19 21:45:19 2012] Failed to get F(0.3-8.0) from xmm0503750301/analysis//spectral/fullrun_mos1_xmm0503750301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat May 19 21:45:19 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 21:45:19 2012] Using Nh = 1.8e+20, photon index=2.02, rate=3.01, arf fullrun_mos1_xmm0503750301_pi300-10000_pass1_cl_src1.arf
[Sat May 19 21:45:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 21:45:19 2012] Updating source flux to 2.4e-11