[Sun Aug 19 05:41:21 2012] Detection parameters:
  Position = (320.6, 335.5) = 19 21 8.49 -58 38 54.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1307.3 +/- 63.1
  Background counts = 212.8
  Rate = 0.02 +/- 0.001

[Sun Aug 19 05:41:23 2012] Off-axis axis estimate = 3.13'
[Sun Aug 19 05:49:36 2012] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 05:49:36 2012] Initial guess for spatial extent in simple fitting = 7.99"
[Sun Aug 19 05:49:36 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.144
[Sun Aug 19 05:49:36 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 7.99"
[Sun Aug 19 07:57:48 2012] fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_src21.ximg exists
[Sun Aug 19 07:57:48 2012] fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Aug 19 07:57:48 2012] Fit fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_src21 appears to have run properly
[Sun Aug 19 07:57:49 2012] fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Aug 19 07:57:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sun Aug 19 07:57:49 2012] fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Aug 19 07:57:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sun Aug 19 07:57:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 21:28:11 2012] Warning, spatial fit 21 centroid is now closest to src. 26
[Sun Aug 19 21:28:11 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 21:28:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 21:28:11 2012] Assessing source extent using major
[Sun Aug 19 21:28:11 2012] Source does appear to be extended
[Sun Aug 19 21:28:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 21:28:56 2012] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 21:28:56 2012] Initial guess for spatial extent in simple fitting = 7.99"
[Sun Aug 19 21:28:56 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.144
[Sun Aug 19 21:28:56 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 7.99"
[Mon Aug 20 01:02:15 2012] fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_src21.ximg exists
[Mon Aug 20 01:02:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_src21.csv
[Mon Aug 20 01:02:15 2012] fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon Aug 20 01:02:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_src21.csv
[Mon Aug 20 01:02:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 01:02:17 2012] fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon Aug 20 01:02:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Mon Aug 20 01:02:17 2012] fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon Aug 20 01:02:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Mon Aug 20 01:02:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 04:17:24 2012] Warning, spatial fit 21 centroid is now closest to src. 19
[Tue Aug 21 04:17:24 2012] Source 22 is offset by -3.678853 and -7.234348 pixels which is larger than
2 X fitted extent = 3.227301 x 3.227301, not incorporating fit results
[Tue Aug 21 04:17:25 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 04:17:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 04:17:25 2012] Assessing source extent using major
[Tue Aug 21 04:17:25 2012] Source does appear to be extended
[Tue Aug 21 04:17:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 04:18:04 2012] Counts = 1307.278076, rescaling region sizes by 2.000000
[Tue Aug 21 04:18:04 2012] XMMSAS src. selection expression = ellipse(27847.677765, 29136.107727, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Aug 21 04:18:04 2012] Writing source region out to fullrun_pn_xmm0503750101_pi300-10000_pass1_cl_src22_src.reg
[Tue Aug 21 04:18:04 2012] Extracting stamp from image fullrun_pn_xmm0503750101_pi300-10000_cl_sm2.00.img.gz, (246, 260) - (396, 410)
[Tue Aug 21 04:18:04 2012] XMMSAS bgd. selection expression = annulus(27847.677765, 29136.107727, 4350.000000, 8700.000000, X, Y) && !ellipse(26987.513400, 27547.795600, 2116.380061, 2116.380061, 0.000000, X, Y) && !ellipse(27364.325140, 23252.462280, 1020.416029, 1020.416029, 0.000000, X, Y) && !ellipse(27475.848000, 21980.632000, 905.904026, 905.904026, 0.000000, X, Y) && !ellipse(27532.879156, 21283.154928, 1407.864041, 440.603156, 82.026050, X, Y) && !ellipse(27598.065000, 20598.863000, 1407.864041, 427.049612, 81.484720, X, Y) && !ellipse(27625.363280, 20266.751400, 725.120821, 725.120821, 0.000000, X, Y) && !ellipse(27496.758000, 21686.861400, 1168.344034, 430.191212, 84.283930, X, Y) && !ellipse(27275.257900, 24218.028000, 1168.344034, 401.008012, 85.126180, X, Y) && !ellipse(26627.203278, 28994.706177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27167.759277, 30653.826019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20467.255203, 21540.104752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28674.708771, 29160.879150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26071.362274, 28910.748840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23648.217926, 27914.433167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27724.176422, 37194.445557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32967.665000, 37041.840400, 428.414412, 428.414412, 0.000000, X, Y) && !ellipse(32387.368988, 36607.099976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32805.180328, 33496.831390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26057.487620, 32176.166400, 401.822412, 401.822412, 0.000000, X, Y) && !ellipse(23305.891724, 32075.334015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29897.986969, 30159.544525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32967.469800, 30198.248400, 518.087215, 518.087215, 0.000000, X, Y) && !ellipse(24972.602295, 28809.772766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30794.327515, 28116.050781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34220.478210, 27892.773438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22077.927399, 27825.160461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24534.673798, 27439.966156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36061.056030, 26858.772278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33859.768585, 26737.206451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22495.457540, 25787.302000, 387.196011, 387.196011, 0.000000, X, Y) && !ellipse(37369.388092, 25705.565613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19772.165878, 23194.335358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28370.128000, 22246.404000, 1343.600039, 1343.600039, 0.000000, X, Y) && !ellipse(31662.530060, 22185.025970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28629.629028, 21796.678818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28905.206400, 21234.031200, 336.126410, 336.126410, 0.000000, X, Y) && !ellipse(18521.139969, 20318.993057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21085.095123, 19706.987564, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 04:18:04 2012] Writing fullrun_pn_xmm0503750101_pi300-10000_pass1_cl_src22.gif
[Tue Aug 21 06:25:03 2012] Mean detx,y = (800.29, -966.87) 
[Tue Aug 21 06:25:26 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 06:28:30 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 06:28:31 2012] Setting source spectrum file to fullrun_pn_xmm0503750101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Tue Aug 21 06:28:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503750101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Tue Aug 21 10:38:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 21 10:38:55 2012] rmf not generated due to insufficient counts
[Tue Aug 21 15:22:16 2012] Updating aperture counts using extracted products
[Tue Aug 21 15:22:17 2012] Error reading totcts from fullrun_pn_xmm0503750101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Tue Aug 21 15:22:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 15:22:20 2012] Using photon index=1.80, rate=0.0216, arf fullrun_pn_xmm0503750101_pi300-10000_pass1_cl_src22.arf
[Tue Aug 21 15:22:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 15:22:20 2012] Updating source flux to 5.2e-14
[Tue Aug 21 15:28:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting