[Sun Aug 19 05:41:21 2012] Detection parameters:
  Position = (322.6, 181.0) = 19 21 7.33 -58 50 6.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3770.4 +/- 79.3
  Background counts = 111.7
  Rate = 0.05 +/- 0.001

[Sun Aug 19 05:41:23 2012] Off-axis axis estimate = 8.69'
[Sun Aug 19 05:49:36 2012] Using EEF radius (= 10.77 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 05:49:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 19 05:49:36 2012] Initial guess for spatial extent in simple fitting = 10.77"
[Sun Aug 19 05:49:36 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.016
[Sun Aug 19 05:49:36 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 10.77"
[Sun Aug 19 07:57:48 2012] fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_src13.ximg exists
[Sun Aug 19 07:57:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_src13.csv
[Sun Aug 19 07:57:48 2012] fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun Aug 19 07:57:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_src13.csv
[Sun Aug 19 07:57:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 07:57:49 2012] fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun Aug 19 07:57:49 2012] fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Aug 19 07:57:49 2012] Fit fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sun Aug 19 21:28:11 2012] Warning, spatial fit 13 centroid is now closest to src. 12
[Sun Aug 19 21:28:11 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 21:28:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 21:28:11 2012] Assessing source extent using major
[Sun Aug 19 21:28:11 2012] Source does appear to be extended
[Sun Aug 19 21:28:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 21:28:11 2012] Source is confused with source 12
[Sun Aug 19 21:28:11 2012] Source is confused with source 14
[Sun Aug 19 21:28:56 2012] Using EEF radius (= 10.77 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 21:28:56 2012] Initial guess for spatial extent in simple fitting = 10.77"
[Sun Aug 19 21:28:56 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.016
[Sun Aug 19 21:28:56 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 10.77"
[Mon Aug 20 01:02:15 2012] fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_src13.ximg exists
[Mon Aug 20 01:02:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_src13.csv
[Mon Aug 20 01:02:15 2012] fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_src13_1.ximg exists
[Mon Aug 20 01:02:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_src13.csv
[Mon Aug 20 01:02:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 01:02:17 2012] fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Mon Aug 20 01:02:17 2012] fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Aug 20 01:02:17 2012] Fit fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Tue Aug 21 04:17:24 2012] Warning, spatial fit 13 centroid is now closest to src. 14
[Tue Aug 21 04:17:25 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 04:17:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 04:17:25 2012] Assessing source extent using major
[Tue Aug 21 04:17:25 2012] Source does appear to be extended
[Tue Aug 21 04:17:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 04:18:04 2012] Counts = 3770.435547, rescaling region sizes by 2.000000
[Tue Aug 21 04:18:04 2012] XMMSAS src. selection expression = ellipse(28017.615570, 15698.760193, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Aug 21 04:18:04 2012] Writing source region out to fullrun_pn_xmm0503750101_pi300-10000_pass1_cl_src13_src.reg
[Tue Aug 21 04:18:04 2012] Extracting stamp from image fullrun_pn_xmm0503750101_pi300-10000_cl_sm2.00.img.gz, (248, 106) - (398, 256)
[Tue Aug 21 04:18:04 2012] XMMSAS bgd. selection expression = annulus(28017.615570, 15698.760193, 4350.000000, 8700.000000, X, Y) && !ellipse(27364.325140, 23252.462280, 1020.416029, 1020.416029, 0.000000, X, Y) && !ellipse(27475.848000, 21980.632000, 905.904026, 905.904026, 0.000000, X, Y) && !ellipse(27532.879156, 21283.154928, 1407.864041, 440.603156, 82.026050, X, Y) && !ellipse(27598.065000, 20598.863000, 1407.864041, 427.049612, 81.484720, X, Y) && !ellipse(27625.363280, 20266.751400, 725.120821, 725.120821, 0.000000, X, Y) && !ellipse(27707.409912, 19352.149536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27780.026340, 18482.784320, 1025.624030, 1025.624030, 0.000000, X, Y) && !ellipse(27921.729187, 16915.218948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27882.081635, 17352.263321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27972.434937, 16307.376541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28076.639526, 15089.588943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28160.915466, 14218.212311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28221.601471, 13444.182327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27496.758000, 21686.861400, 1168.344034, 430.191212, 84.283930, X, Y) && !ellipse(27275.257900, 24218.028000, 1168.344034, 401.008012, 85.126180, X, Y) && !ellipse(20467.255203, 21540.104752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30705.224731, 19109.985641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22456.184113, 14207.605469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30308.353607, 13840.610062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19772.165878, 23194.335358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28370.128000, 22246.404000, 1343.600039, 1343.600039, 0.000000, X, Y) && !ellipse(31662.530060, 22185.025970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28629.629028, 21796.678818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28905.206400, 21234.031200, 336.126410, 336.126410, 0.000000, X, Y) && !ellipse(18521.139969, 20318.993057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21085.095123, 19706.987564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23984.713684, 18356.524170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34346.170200, 16482.040400, 466.656813, 466.656813, 0.000000, X, Y) && !ellipse(26325.743286, 16418.420486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30826.238312, 15501.853928, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 04:18:04 2012] Writing fullrun_pn_xmm0503750101_pi300-10000_pass1_cl_src13.gif
[Tue Aug 21 05:43:43 2012] Mean detx,y = (148.41, 11839.27) 
[Tue Aug 21 05:43:56 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 05:48:08 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 05:48:08 2012] Setting source spectrum file to fullrun_pn_xmm0503750101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Aug 21 05:48:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503750101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue Aug 21 09:46:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 21 09:46:18 2012] rmf not generated due to insufficient counts
[Tue Aug 21 15:22:16 2012] Updating aperture counts using extracted products
[Tue Aug 21 15:22:16 2012] Error reading totcts from fullrun_pn_xmm0503750101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Aug 21 15:22:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 15:22:20 2012] Using photon index=1.80, rate=0.0486, arf fullrun_pn_xmm0503750101_pi300-10000_pass1_cl_src13.arf
[Tue Aug 21 15:22:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 15:22:20 2012] Updating source flux to 2.1e-13
[Tue Aug 21 15:28:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting