[Sun Aug 19 05:41:21 2012] Detection parameters:
  Position = (310.9, 317.1) = 19 21 13.94 -58 40 12.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1363235.6 +/- 1355.0
  Background counts = 205.2
  Rate = 2e+01 +/- 0.02

[Sun Aug 19 05:41:23 2012] Off-axis axis estimate = 1.62'
[Sun Aug 19 05:49:36 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 05:49:36 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Sun Aug 19 05:49:36 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854
[Sun Aug 19 05:49:36 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Sun Aug 19 07:57:48 2012] fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Aug 19 07:57:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_src1.csv
[Sun Aug 19 07:57:48 2012] fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Aug 19 07:57:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_src1.csv
[Sun Aug 19 07:57:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 07:57:49 2012] fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Aug 19 07:57:49 2012] fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Aug 19 07:57:49 2012] Fit fullrun_pn_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Aug 19 21:28:11 2012] Spatial fit model total counts = 1226910.000000, observed total counts = 1272173.000000
[Sun Aug 19 21:28:11 2012] Offset between fit and detection position for source 1 = 0.171264 pixels
[Sun Aug 19 21:28:11 2012] 1226480.000000 total counts/ 25600.000000 bgd. counts: snr = 7505.500000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.171264 pixels
  Position = (310.8, 317.2) = 19 21 14.00 -58 40 13.4
  Extent = 8.9 (8.9-8.9)", rotation angle = 0
  Source counts = 1200880.0 +/- 1107.5
  Background counts = 25600.0
  Rate = 2e+01 +/- 0.01
[Sun Aug 19 21:28:11 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 21:28:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 21:28:11 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 21:28:11 2012] Source does appear to be extended
[Sun Aug 19 21:28:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 21:28:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 19 21:28:56 2012] Initial guess for spatial extent in simple fitting = 8.87"
[Sun Aug 19 21:28:56 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.970
[Sun Aug 19 21:28:56 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.87"
[Mon Aug 20 01:02:15 2012] fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Aug 20 01:02:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_src1.csv
[Mon Aug 20 01:02:15 2012] fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Aug 20 01:02:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_src1.csv
[Mon Aug 20 01:02:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 01:02:17 2012] fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Aug 20 01:02:17 2012] fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Aug 20 01:02:17 2012] Fit fullrun_pn_xmm0503750101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug 21 04:17:24 2012] Spatial fit model total counts = 1224840.000000, observed total counts = 1268398.000000
[Tue Aug 21 04:17:24 2012] Offset between fit and detection position for source 1 = 0.002931 pixels
[Tue Aug 21 04:17:24 2012] 1224090.000000 total counts/ 25600.000000 bgd. counts: snr = 7490.562500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.002931 pixels
  Position = (310.8, 317.2) = 19 21 14.00 -58 40 13.4
  Extent = 8.8 (8.8-8.8)", rotation angle = 0
  Source counts = 1198490.0 +/- 1106.4
  Background counts = 25600.0
  Rate = 2e+01 +/- 0.01
[Tue Aug 21 04:17:25 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 04:17:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 04:17:25 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 04:17:25 2012] Source does appear to be extended
[Tue Aug 21 04:17:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 04:18:02 2012] Counts = 1198490.000000, rescaling region sizes by 3.000000
[Tue Aug 21 04:18:02 2012] XMMSAS src. selection expression = ellipse(26987.513400, 27547.795600, 1587.285046, 1587.285046, 0.000000, X, Y)
[Tue Aug 21 04:18:02 2012] Writing source region out to fullrun_pn_xmm0503750101_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug 21 04:18:02 2012] Extracting stamp from image fullrun_pn_xmm0503750101_pi300-10000_cl_sm2.00.img.gz, (220, 226) - (402, 408)
[Tue Aug 21 04:18:02 2012] XMMSAS bgd. selection expression = annulus(26987.513400, 27547.795600, 7936.425228, 15872.850457, X, Y) && !ellipse(27364.325140, 23252.462280, 1020.416029, 1020.416029, 0.000000, X, Y) && !ellipse(27475.848000, 21980.632000, 905.904026, 905.904026, 0.000000, X, Y) && !ellipse(17473.199905, 21623.466034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27532.879156, 21283.154928, 1407.864041, 440.603156, 82.026050, X, Y) && !ellipse(27598.065000, 20598.863000, 1407.864041, 427.049612, 81.484720, X, Y) && !ellipse(27625.363280, 20266.751400, 725.120821, 725.120821, 0.000000, X, Y) && !ellipse(27707.409912, 19352.149536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27780.026340, 18482.784320, 1025.624030, 1025.624030, 0.000000, X, Y) && !ellipse(27921.729187, 16915.218948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27882.081635, 17352.263321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27972.434937, 16307.376541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28017.615570, 15698.760193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28076.639526, 15089.588943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28160.915466, 14218.212311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28221.601471, 13444.182327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27496.758000, 21686.861400, 1168.344034, 430.191212, 84.283930, X, Y) && !ellipse(27275.257900, 24218.028000, 1168.344034, 401.008012, 85.126180, X, Y) && !ellipse(26627.203278, 28994.706177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27167.759277, 30653.826019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12768.412323, 31441.318329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27847.677765, 29136.107727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20467.255203, 21540.104752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30705.224731, 19109.985641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18471.165600, 13334.432800, 458.324813, 458.324813, 0.000000, X, Y) && !ellipse(28674.708771, 29160.879150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26071.362274, 28910.748840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23648.217926, 27914.433167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22456.184113, 14207.605469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30308.353607, 13840.610062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16638.551620, 36201.820374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27619.300110, 41209.680878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16381.692139, 42498.633881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25662.915222, 41798.393799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27724.176422, 37194.445557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17157.593918, 37272.532623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39675.442993, 36971.075287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32967.665000, 37041.840400, 428.414412, 428.414412, 0.000000, X, Y) && !ellipse(32387.368988, 36607.099976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32805.180328, 33496.831390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26057.487620, 32176.166400, 401.822412, 401.822412, 0.000000, X, Y) && !ellipse(23305.891724, 32075.334015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18206.151276, 31358.884979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15136.431625, 30833.892761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37558.898773, 30634.051361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29897.986969, 30159.544525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32967.469800, 30198.248400, 518.087215, 518.087215, 0.000000, X, Y) && !ellipse(24972.602295, 28809.772766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30794.327515, 28116.050781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34220.478210, 27892.773438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22077.927399, 27825.160461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24534.673798, 27439.966156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36061.056030, 26858.772278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33859.768585, 26737.206451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22495.457540, 25787.302000, 387.196011, 387.196011, 0.000000, X, Y) && !ellipse(37369.388092, 25705.565613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39282.671234, 23876.308838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19772.165878, 23194.335358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11571.059600, 22895.040800, 562.585616, 562.585616, 0.000000, X, Y) && !ellipse(28370.128000, 22246.404000, 1343.600039, 1343.600039, 0.000000, X, Y) && !ellipse(31662.530060, 22185.025970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28629.629028, 21796.678818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15545.194626, 21879.344482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28905.206400, 21234.031200, 336.126410, 336.126410, 0.000000, X, Y) && !ellipse(18521.139969, 20318.993057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21085.095123, 19706.987564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23984.713684, 18356.524170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16925.261740, 16872.533200, 441.000013, 441.000013, 0.000000, X, Y) && !ellipse(34346.170200, 16482.040400, 466.656813, 466.656813, 0.000000, X, Y) && !ellipse(26325.743286, 16418.420486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30826.238312, 15501.853928, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 04:18:02 2012] Writing fullrun_pn_xmm0503750101_pi300-10000_pass1_cl_src1.gif
[Tue Aug 21 04:20:55 2012] Mean detx,y = (157.59, -38.62) 
[Tue Aug 21 04:21:32 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 04:34:02 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 04:34:02 2012] Setting source spectrum file to fullrun_pn_xmm0503750101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 21 04:34:02 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503750101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug 21 15:22:15 2012] Updating aperture counts using extracted products
[Tue Aug 21 15:22:15 2012] Error reading totcts from fullrun_pn_xmm0503750101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 21 15:22:19 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 15:22:19 2012] Using photon index=1.80, rate=15.4, arf fullrun_pn_xmm0503750101_pi300-10000_pass1_cl_src1.arf
[Tue Aug 21 15:22:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 15:22:19 2012] Updating source flux to 3.3e-11
[Tue Aug 21 15:34:04 2012] Reading fit data from xmm0503750101/analysis//spectral/fullrun_pn_xmm0503750101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Aug 21 15:34:04 2012] Spectral fit parameter nH value = 2.48894e+20
[Tue Aug 21 15:34:04 2012] Spectral fit parameter PhoIndex value = 2.03284
[Tue Aug 21 15:34:04 2012] Failed to get F(0.3-8.0) from xmm0503750101/analysis//spectral/fullrun_pn_xmm0503750101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Aug 21 15:34:04 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 15:34:04 2012] Using Nh = 2.5e+20, photon index=2.03, rate=15.4, arf fullrun_pn_xmm0503750101_pi300-10000_pass1_cl_src1.arf
[Tue Aug 21 15:34:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 15:34:04 2012] Updating source flux to 3.1e-11