[Sun Aug 19 05:42:30 2012] Detection parameters:
  Position = (307.4, 359.9) = 19 21 15.90 -58 37 7.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.8 +/- 16.0
  Background counts = 51.5
  Rate = 0.001 +/- 0.0002

[Sun Aug 19 05:42:31 2012] Off-axis axis estimate = 4.50'
[Sun Aug 19 09:32:55 2012] Using EEF radius (= 8.68 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 09:32:55 2012] Initial guess for spatial extent in simple fitting = 8.68"
[Sun Aug 19 09:32:55 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.004
[Sun Aug 19 09:32:55 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 8.68"
[Sun Aug 19 21:27:47 2012] fullrun_mos2_xmm0503750101_pi300-10000_cl_pass0_src36.ximg exists
[Sun Aug 19 21:27:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750101_pi300-10000_cl_pass0_src36.csv
[Sun Aug 19 21:27:47 2012] fullrun_mos2_xmm0503750101_pi300-10000_cl_pass0_src36_1.ximg exists
[Sun Aug 19 21:27:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750101_pi300-10000_cl_pass0_src36.csv
[Sun Aug 19 21:27:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503750101_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503750101_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 21:27:48 2012] fullrun_mos2_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Sun Aug 19 21:27:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src36.csv
[Sun Aug 19 21:27:48 2012] fullrun_mos2_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Sun Aug 19 21:27:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src36.csv
[Sun Aug 19 21:27:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 21:28:35 2012] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 10.959325 pixels away
[Sun Aug 19 21:28:36 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 21:28:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 21:28:36 2012] Assessing source extent using major
[Sun Aug 19 21:28:36 2012] Source does appear to be extended
[Sun Aug 19 21:28:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 21:28:36 2012] Deleting source due to low Poisson probability 1.0