[Sun Aug 19 05:41:55 2012] Detection parameters:
  Position = (373.3, 421.4) = 19 20 39.26 -58 32 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.6 +/- 9.6
  Background counts = 23.9
  Rate = 0.0005 +/- 0.0001

[Sun Aug 19 05:41:55 2012] Off-axis axis estimate = 10.44'
[Sun Aug 19 07:57:50 2012] Using EEF radius (= 11.65 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 07:57:50 2012] Initial guess for spatial extent in simple fitting = 11.65"
[Sun Aug 19 07:57:50 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.040
[Sun Aug 19 07:57:50 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 11.65"
[Sun Aug 19 09:32:54 2012] fullrun_mos1_xmm0503750101_pi300-10000_cl_pass0_src50.ximg exists
[Sun Aug 19 09:32:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503750101_pi300-10000_cl_pass0_src50.csv
[Sun Aug 19 09:32:54 2012] fullrun_mos1_xmm0503750101_pi300-10000_cl_pass0_src50_1.ximg exists
[Sun Aug 19 09:32:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503750101_pi300-10000_cl_pass0_src50.csv
[Sun Aug 19 09:32:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503750101_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503750101_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 09:32:55 2012] fullrun_mos1_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Sun Aug 19 09:32:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src50.csv
[Sun Aug 19 09:32:55 2012] fullrun_mos1_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Sun Aug 19 09:32:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src50.csv
[Sun Aug 19 09:32:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 21:28:24 2012] Warning: source 50 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 10.013280 pixels away
[Sun Aug 19 21:28:24 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 21:28:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 21:28:24 2012] Assessing source extent using major
[Sun Aug 19 21:28:24 2012] Source does appear to be extended
[Sun Aug 19 21:28:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 21:28:24 2012] Deleting source due to low Poisson probability 0.8