[Sun Aug 19 05:41:54 2012] Detection parameters:
  Position = (305.1, 339.6) = 19 21 17.14 -58 38 43.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 178.9 +/- 26.3
  Background counts = 50.7
  Rate = 0.003 +/- 0.0004

[Sun Aug 19 05:41:55 2012] Off-axis axis estimate = 3.02'
[Sun Aug 19 07:57:50 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 07:57:50 2012] Initial guess for spatial extent in simple fitting = 7.94"
[Sun Aug 19 07:57:50 2012] source mask rpix=1.8, npix_max = 21, mask sum = 17, frac = 0.786
[Sun Aug 19 07:57:50 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.94"
[Sun Aug 19 09:32:53 2012] fullrun_mos1_xmm0503750101_pi300-10000_cl_pass0_src10.ximg exists
[Sun Aug 19 09:32:53 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0503750101_pi300-10000_cl_pass0_src10.csv
[Sun Aug 19 09:32:53 2012] fullrun_mos1_xmm0503750101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Aug 19 09:32:53 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0503750101_pi300-10000_cl_pass0_src10.csv
[Sun Aug 19 09:32:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503750101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503750101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 09:32:54 2012] fullrun_mos1_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Aug 19 09:32:54 2012] fullrun_mos1_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Aug 19 09:32:54 2012] Fit fullrun_mos1_xmm0503750101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sun Aug 19 21:28:24 2012] Source 16 is offset by -4.134821 and 5.873718 pixels which is larger than
2 X fitted extent = 4.959540 x 4.959540, not incorporating fit results
[Sun Aug 19 21:28:24 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 21:28:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 21:28:24 2012] Assessing source extent using major
[Sun Aug 19 21:28:24 2012] Source does appear to be extended
[Sun Aug 19 21:28:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 01:02:18 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 01:02:18 2012] Initial guess for spatial extent in simple fitting = 7.94"
[Mon Aug 20 01:02:18 2012] source mask rpix=1.8, npix_max = 21, mask sum = 17, frac = 0.786
[Mon Aug 20 01:02:18 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 7.94"
[Mon Aug 20 02:22:10 2012] fullrun_mos1_xmm0503750101_pi300-10000_cl_pass1_src10.ximg exists
[Mon Aug 20 02:22:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503750101_pi300-10000_cl_pass1_src10.csv
[Mon Aug 20 02:22:10 2012] fullrun_mos1_xmm0503750101_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon Aug 20 02:22:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503750101_pi300-10000_cl_pass1_src10.csv
[Mon Aug 20 02:22:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503750101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503750101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 02:22:11 2012] fullrun_mos1_xmm0503750101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon Aug 20 02:22:11 2012] fullrun_mos1_xmm0503750101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Aug 20 02:22:11 2012] Fit fullrun_mos1_xmm0503750101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Aug 21 04:17:34 2012] Warning, spatial fit 10 centroid is now closest to src. 9
[Tue Aug 21 04:17:34 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 04:17:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 04:17:34 2012] Assessing source extent using major
[Tue Aug 21 04:17:34 2012] Source does appear to be extended
[Tue Aug 21 04:17:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 12:37:24 2012] XMMSAS src. selection expression = ellipse(26498.078583, 29494.361450, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 21 12:37:24 2012] Writing source region out to fullrun_mos1_xmm0503750101_pi300-10000_pass1_cl_src16_src.reg
[Tue Aug 21 12:37:24 2012] Extracting stamp from image fullrun_mos1_xmm0503750101_pi300-10000_cl_sm2.00.img.gz, (268, 302) - (343, 377)
[Tue Aug 21 12:37:24 2012] XMMSAS bgd. selection expression = annulus(26498.078583, 29494.361450, 1087.500000, 2175.000000, X, Y) && !ellipse(26981.528600, 27537.949800, 2040.657659, 2040.657659, 0.000000, X, Y) && !ellipse(24530.692200, 27380.066200, 278.958408, 278.958408, 0.000000, X, Y) && !ellipse(28072.011810, 29649.444366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25874.088000, 28915.704000, 428.492012, 428.492012, 0.000000, X, Y) && !ellipse(27226.900055, 29541.453705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24693.564026, 26921.237152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25458.362000, 29438.166000, 853.392025, 509.091215, 0.405000, X, Y)
[Tue Aug 21 12:37:24 2012] Writing fullrun_mos1_xmm0503750101_pi300-10000_pass1_cl_src16.gif
[Tue Aug 21 12:49:26 2012] Mean detx,y = (1974.16, -416.26) 
[Tue Aug 21 12:49:29 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 12:49:40 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 12:49:40 2012] Setting source spectrum file to fullrun_mos1_xmm0503750101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Aug 21 12:49:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503750101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Tue Aug 21 13:38:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 21 13:38:31 2012] rmf not generated due to insufficient counts
[Tue Aug 21 15:22:23 2012] Updating aperture counts using extracted products
[Tue Aug 21 15:22:23 2012] Error reading totcts from fullrun_mos1_xmm0503750101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Aug 21 15:22:25 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 15:22:25 2012] Using photon index=1.80, rate=0.00273, arf fullrun_mos1_xmm0503750101_pi300-10000_pass1_cl_src16.arf
[Tue Aug 21 15:22:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 15:22:25 2012] Updating source flux to 2.8e-14
[Tue Aug 21 15:22:30 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting