[Sun May 5 02:22:32 2013] Detection parameters: Position = (339.4, 251.9) = 19 29 16.03 17 56 11.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 500.0 +/- 32.5 Background counts = 150.7 Rate = 0.01 +/- 0.001 [Sun May 5 02:22:33 2013] Off-axis axis estimate = 4.50' [Sun May 5 02:22:52 2013] Using EEF radius (= 8.68 ")to estimate initial spatial extent for simple fitting [Sun May 5 02:22:52 2013] Initial guess for spatial extent in simple fitting = 8.68" [Sun May 5 02:22:52 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.004 [Sun May 5 02:22:52 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 8.68" [Sun May 5 02:22:52 2013] fullrun_pn_xmm0503740101_pi300-10000_cl_pass0_src8.ximg exists [Sun May 5 02:22:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503740101_pi300-10000_cl_pass0_src8.csv [Sun May 5 02:22:52 2013] fullrun_pn_xmm0503740101_pi300-10000_cl_pass0_src8_1.ximg exists [Sun May 5 02:22:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503740101_pi300-10000_cl_pass0_src8.csv [Sun May 5 02:22:52 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0503740101_pi300-10000_cl_pass0_src8_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0503740101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 02:22:53 2013] fullrun_pn_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists [Sun May 5 02:22:53 2013] fullrun_pn_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists [Sun May 5 02:22:53 2013] Fit fullrun_pn_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly [Sun May 5 02:23:02 2013] Warning, spatial fit 8 centroid is now closest to src. 9 [Sun May 5 02:23:02 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 17.098264 pixels away [Sun May 5 02:23:02 2013] Vigneting correction estimate = 1.000000 [Sun May 5 02:23:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 02:23:02 2013] Assessing source extent using major [Sun May 5 02:23:02 2013] Source does appear to be extended [Sun May 5 02:23:02 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 02:23:17 2013] Using EEF radius (= 8.68 ")to estimate initial spatial extent for simple fitting [Sun May 5 02:23:17 2013] Initial guess for spatial extent in simple fitting = 8.68" [Sun May 5 02:23:17 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.004 [Sun May 5 02:23:17 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 8.68" [Sun May 5 02:23:17 2013] fullrun_pn_xmm0503740101_pi300-10000_cl_pass1_src8.ximg exists [Sun May 5 02:23:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503740101_pi300-10000_cl_pass1_src8.csv [Sun May 5 02:23:18 2013] fullrun_pn_xmm0503740101_pi300-10000_cl_pass1_src8_1.ximg exists [Sun May 5 02:23:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503740101_pi300-10000_cl_pass1_src8.csv [Sun May 5 02:23:18 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0503740101_pi300-10000_cl_pass1_src8_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0503740101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 02:23:18 2013] fullrun_pn_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists [Sun May 5 02:23:18 2013] fullrun_pn_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists [Sun May 5 02:23:18 2013] Fit fullrun_pn_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly [Sun May 5 02:23:27 2013] Warning, spatial fit 8 centroid is now closest to src. 9 [Sun May 5 02:23:27 2013] Source 8 is offset by 7.939973 and -0.841629 pixels which is larger than 2 X fitted extent = 2.012349 x 2.012349, not incorporating fit results [Sun May 5 02:23:27 2013] Vigneting correction estimate = 1.000000 [Sun May 5 02:23:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 02:23:27 2013] Assessing source extent using major [Sun May 5 02:23:27 2013] Source does appear to be extended [Sun May 5 02:23:27 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 02:23:44 2013] XMMSAS src. selection expression = ellipse(29482.899689, 21867.509689, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 5 02:23:44 2013] Not overwriting source region fullrun_pn_xmm0503740101_pi300-10000_pass1_cl_src8_src.reg [Sun May 5 02:23:44 2013] Extracting stamp from image fullrun_pn_xmm0503740101_pi300-10000_cl_sm2.00.img.gz, (302, 214) - (377, 289) [Sun May 5 02:23:44 2013] XMMSAS bgd. selection expression = annulus(29482.899689, 21867.509689, 1087.500000, 2175.000000, X, Y) && !ellipse(28800.342000, 21941.226800, 301.226409, 301.226409, 0.000000, X, Y) && !ellipse(31669.103912, 22246.091644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30567.088867, 18843.441940, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 5 02:23:44 2013] Writing fullrun_pn_xmm0503740101_pi300-10000_pass1_cl_src8.gif [Sun May 5 02:23:46 2013] ../../xmm0503740101/products/events/fullrun_pn_xmm0503740101_pi300-10000_pass1_cl_src8_src.evt and ../../xmm0503740101/products/events/fullrun_pn_xmm0503740101_pi300-10000_pass1_cl_src8_bgd.evt exist, delete to re-create [Sun May 5 02:23:46 2013] Mean detx,y = (-4505.21, -2593.74) [Sun May 5 02:23:46 2013] ../../xmm0503740101/products/images/fullrun_pn_xmm0503740101_pi300-10000_pass1_cl_src8_src.img and ../../xmm0503740101/products/images/fullrun_pn_xmm0503740101_pi300-10000_pass1_cl_src8_bgd.img exist, delete to re-create [Sun May 5 02:23:46 2013] ../../xmm0503740101/products/spectra/fullrun_pn_xmm0503740101_pi300-10000_pass1_cl_src8_src_b10.pi.gz and ../../xmm0503740101/products/spectra/fullrun_pn_xmm0503740101_pi300-10000_pass1_cl_src8_bgd.pi exist, delete to re-create [Sun May 5 02:23:46 2013] Setting source spectrum file to fullrun_pn_xmm0503740101_pi300-10000_pass1_cl_src8_src_b10.pi.gz [Sun May 5 02:23:46 2013] Setting bgd. spectrum file to fullrun_pn_xmm0503740101_pi300-10000_pass1_cl_src8_bgd.pi.gz [Sun May 5 02:23:46 2013] ../../xmm0503740101/products/lightcurves/fullrun_pn_xmm0503740101_pi300-10000_pass1_cl_src8_src.lc and ../../xmm0503740101/products/lightcurves/fullrun_pn_xmm0503740101_pi300-10000_pass1_cl_src8_bgd.lc exist, delete to re-create [Sun May 5 02:23:53 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun May 5 02:23:53 2013] rmf not generated due to insufficient counts [Sun May 5 02:23:53 2013] fullrun_pn_xmm0503740101_pi300-10000_pass1_cl_src8.arf exists, delete to re-create [Sun May 5 02:57:44 2013] Updating aperture counts using extracted products [Sun May 5 02:57:44 2013] Total counts from fullrun_pn_xmm0503740101_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 939.00 [Sun May 5 02:57:44 2013] Total counts from fullrun_pn_xmm0503740101_pi300-10000_pass1_cl_src8_bgd.pi.gz = 2363.00 [Sun May 5 02:57:44 2013] Got source and background scale factors 1340800.000000, 7631078.000000 [Sun May 5 02:57:44 2013] User source parameters: Position = (339.4, 251.9) = 19 29 16.03 17 56 11.1 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 523.8 +/- 31.7 Background aperture counts = 415.2 Rate = 0.01 +/- 0.0009 [Sun May 5 02:57:44 2013] Updating counts from extracted products [Sun May 5 02:57:44 2013] Set source signif. to 523.81/20.38 = 25.71 [Sun May 5 02:57:48 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 5 02:57:48 2013] Using photon index=1.80, rate=0.0146, arf fullrun_pn_xmm0503740101_pi300-10000_pass1_cl_src8.arf [Sun May 5 02:57:48 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 5 02:57:48 2013] Updating source flux to 1.3e-13 [Sun May 5 02:58:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun May 5 02:58:15 2013] xmm0503740101/analysis//spectral/fullrun_pn_xmm0503740101_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete