[Sun May  5 02:22:34 2013] Detection parameters:
  Position = (295.4, 377.7) = 19 29 29.45 18 5 14.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 772.0 +/- 35.9
  Background counts = 45.3
  Rate = 0.02 +/- 0.001

[Sun May  5 02:22:35 2013] Off-axis axis estimate = 5.75'
[Sun May  5 02:22:54 2013] Using EEF radius (= 9.30 ")to estimate initial spatial extent for simple fitting
[Sun May  5 02:22:54 2013] Initial guess for spatial extent in simple fitting = 9.30"
[Sun May  5 02:22:54 2013] source mask rpix=2.1, npix_max = 27, mask sum = 20, frac = 0.718
[Sun May  5 02:22:54 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 9.30"
[Sun May  5 02:22:54 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src1.ximg exists
[Sun May  5 02:22:54 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May  5 02:22:54 2013] Fit fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src1 appears to have run properly
[Sun May  5 02:22:55 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May  5 02:22:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May  5 02:22:55 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May  5 02:22:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May  5 02:22:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 02:23:08 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 10.685816 pixels away
[Sun May  5 02:23:08 2013] Vigneting correction estimate = 1.000000
[Sun May  5 02:23:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 02:23:08 2013] Assessing source extent using major
[Sun May  5 02:23:08 2013] Source does appear to be extended
[Sun May  5 02:23:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 02:23:19 2013] Using EEF radius (= 9.30 ")to estimate initial spatial extent for simple fitting
[Sun May  5 02:23:19 2013] Initial guess for spatial extent in simple fitting = 9.30"
[Sun May  5 02:23:19 2013] source mask rpix=2.1, npix_max = 27, mask sum = 20, frac = 0.718
[Sun May  5 02:23:19 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 9.30"
[Sun May  5 02:23:20 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src1.ximg exists
[Sun May  5 02:23:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src1.csv
[Sun May  5 02:23:20 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May  5 02:23:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src1.csv
[Sun May  5 02:23:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 02:23:20 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May  5 02:23:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May  5 02:23:20 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May  5 02:23:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May  5 02:23:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 02:23:35 2013] Spatial fit model total counts = 880.581000, observed total counts = 1035.000000
[Sun May  5 02:23:35 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 02:23:35 2013] Vigneting correction estimate = 1.000000
[Sun May  5 02:23:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 02:23:35 2013] Assessing source extent using major
[Sun May  5 02:23:35 2013] Source does appear to be extended
[Sun May  5 02:23:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 02:23:55 2013] XMMSAS src. selection expression = ellipse(25653.304016, 32811.159454, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May  5 02:23:55 2013] Not overwriting source region fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src6_src.reg
[Sun May  5 02:23:55 2013] Extracting stamp from image fullrun_mos2_xmm0503740101_pi300-10000_cl_sm2.00.img.gz, (258, 340) - (333, 415)
[Sun May  5 02:23:55 2013] XMMSAS bgd. selection expression = annulus(25653.304016, 32811.159454, 1087.500000, 2175.000000, X, Y) && !ellipse(22608.558899, 34806.074127, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May  5 02:23:55 2013] Writing fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src6.gif
[Sun May  5 02:23:56 2013] ../../xmm0503740101/products/events/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src6_src.evt and ../../xmm0503740101/products/events/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src6_bgd.evt exist, delete to re-create
[Sun May  5 02:23:56 2013] Mean detx,y = (921.40, -8451.41) 
[Sun May  5 02:23:56 2013] ../../xmm0503740101/products/images/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src6_src.img and ../../xmm0503740101/products/images/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src6_bgd.img exist, delete to re-create
[Sun May  5 02:23:56 2013] ../../xmm0503740101/products/spectra/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src6_src_b10.pi.gz and ../../xmm0503740101/products/spectra/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src6_bgd.pi exist, delete to re-create
[Sun May  5 02:23:56 2013] Setting source spectrum file to fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun May  5 02:23:56 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun May  5 02:23:56 2013] ../../xmm0503740101/products/lightcurves/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src6_src.lc and ../../xmm0503740101/products/lightcurves/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src6_bgd.lc exist, delete to re-create
[Sun May  5 02:24:42 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May  5 02:24:42 2013] rmf not generated due to insufficient counts
[Sun May  5 02:57:51 2013] Updating aperture counts using extracted products
[Sun May  5 02:57:51 2013] Total counts from fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 856.00
[Sun May  5 02:57:51 2013] Total counts from fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src6_bgd.pi.gz = 1585.00
[Sun May  5 02:57:51 2013] Got source and background scale factors 1263656.000000, 9715606.000000
[Sun May  5 02:57:51 2013] User source parameters:
  Position = (295.4, 377.7) = 19 29 29.45 18 5 14.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 649.8 +/- 30.3
  Background aperture counts = 206.2
  Rate = 0.01 +/- 0.0006

[Sun May  5 02:57:51 2013] Updating counts from extracted products
[Sun May  5 02:57:51 2013] Set source signif. to 649.85/14.36 = 45.26
[Sun May  5 02:57:56 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 02:57:56 2013] Using photon index=1.80, rate=0.0136, arf fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src6.arf
[Sun May  5 02:57:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 02:57:56 2013] Updating source flux to 3.6e-13
[Sun May  5 02:58:06 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May  5 02:58:11 2013] xmm0503740101/analysis//spectral/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete