[Sun May  5 02:22:35 2013] Detection parameters:
  Position = (364.6, 256.8) = 19 29 8.35 17 56 33.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.7 +/- 15.6
  Background counts = 54.3
  Rate = 0.004 +/- 0.0005

[Sun May  5 02:22:35 2013] Off-axis axis estimate = 5.67'
[Sun May  5 02:22:54 2013] Using EEF radius (= 9.26 ")to estimate initial spatial extent for simple fitting
[Sun May  5 02:22:54 2013] Initial guess for spatial extent in simple fitting = 9.26"
[Sun May  5 02:22:54 2013] source mask rpix=2.1, npix_max = 27, mask sum = 15, frac = 0.542
[Sun May  5 02:22:54 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 9.26"
[Sun May  5 02:22:54 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src11.ximg exists
[Sun May  5 02:22:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src11.csv
[Sun May  5 02:22:54 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun May  5 02:22:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src11.csv
[Sun May  5 02:22:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 02:22:55 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun May  5 02:22:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun May  5 02:22:55 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun May  5 02:22:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun May  5 02:22:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 02:23:08 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 10.389976 pixels away
[Sun May  5 02:23:08 2013] Vigneting correction estimate = 1.000000
[Sun May  5 02:23:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 02:23:08 2013] Assessing source extent using major
[Sun May  5 02:23:08 2013] Source does appear to be extended
[Sun May  5 02:23:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 02:23:19 2013] Using EEF radius (= 9.26 ")to estimate initial spatial extent for simple fitting
[Sun May  5 02:23:19 2013] Initial guess for spatial extent in simple fitting = 9.26"
[Sun May  5 02:23:19 2013] source mask rpix=2.1, npix_max = 27, mask sum = 15, frac = 0.542
[Sun May  5 02:23:19 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 9.26"
[Sun May  5 02:23:20 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src11.ximg exists
[Sun May  5 02:23:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src11.csv
[Sun May  5 02:23:20 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun May  5 02:23:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src11.csv
[Sun May  5 02:23:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 02:23:20 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun May  5 02:23:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sun May  5 02:23:20 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun May  5 02:23:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sun May  5 02:23:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 02:23:35 2013] Spatial fit model total counts = 402.376000, observed total counts = 330.000000
[Sun May  5 02:23:35 2013] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 02:23:35 2013] Vigneting correction estimate = 1.000000
[Sun May  5 02:23:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 02:23:35 2013] Assessing source extent using major
[Sun May  5 02:23:35 2013] Source does appear to be extended
[Sun May  5 02:23:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 02:23:55 2013] XMMSAS src. selection expression = ellipse(31674.629028, 22294.904358, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May  5 02:23:55 2013] Not overwriting source region fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src29_src.reg
[Sun May  5 02:23:55 2013] Extracting stamp from image fullrun_mos2_xmm0503740101_pi300-10000_cl_sm2.00.img.gz, (327, 219) - (402, 294)
[Sun May  5 02:23:55 2013] XMMSAS bgd. selection expression = annulus(31674.629028, 22294.904358, 1087.500000, 2175.000000, X, Y) && !ellipse(29507.328613, 21811.650528, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May  5 02:23:55 2013] Writing fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src29.gif
[Sun May  5 02:23:57 2013] ../../xmm0503740101/products/events/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src29_src.evt and ../../xmm0503740101/products/events/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src29_bgd.evt exist, delete to re-create
[Sun May  5 02:23:58 2013] Mean detx,y = (6990.82, 2011.90) 
[Sun May  5 02:23:58 2013] ../../xmm0503740101/products/images/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src29_src.img and ../../xmm0503740101/products/images/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src29_bgd.img exist, delete to re-create
[Sun May  5 02:23:58 2013] ../../xmm0503740101/products/spectra/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src29_src_b10.pi.gz and ../../xmm0503740101/products/spectra/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src29_bgd.pi exist, delete to re-create
[Sun May  5 02:23:58 2013] Setting source spectrum file to fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sun May  5 02:23:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sun May  5 02:23:58 2013] ../../xmm0503740101/products/lightcurves/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src29_src.lc and ../../xmm0503740101/products/lightcurves/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src29_bgd.lc exist, delete to re-create
[Sun May  5 02:43:04 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May  5 02:43:04 2013] rmf not generated due to insufficient counts
[Sun May  5 02:57:53 2013] Updating aperture counts using extracted products
[Sun May  5 02:57:53 2013] Total counts from fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 239.00
[Sun May  5 02:57:53 2013] Total counts from fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src29_bgd.pi.gz = 1410.00
[Sun May  5 02:57:53 2013] Got source and background scale factors 1059516.000000, 9256690.000000
[Sun May  5 02:57:53 2013] User source parameters:
  Position = (364.6, 256.8) = 19 29 8.35 17 56 33.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 77.6 +/- 16.5
  Background aperture counts = 161.4
  Rate = 0.002 +/- 0.0003

[Sun May  5 02:57:53 2013] Updating counts from extracted products
[Sun May  5 02:57:53 2013] Set source signif. to 77.61/12.70 = 6.11
[Sun May  5 02:57:56 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 02:57:56 2013] Using photon index=1.80, rate=0.00162, arf fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src29.arf
[Sun May  5 02:57:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 02:57:56 2013] Updating source flux to 7.7e-14
[Sun May  5 02:58:06 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May  5 02:58:11 2013] xmm0503740101/analysis//spectral/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete