[Sun May 5 02:22:34 2013] Detection parameters: Position = (241.6, 473.9) = 19 29 45.88 18 12 22.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 83.5 +/- 15.8 Background counts = 42.3 Rate = 0.002 +/- 0.0003 [Sun May 5 02:22:35 2013] Off-axis axis estimate = 13.37' [Sun May 5 02:22:54 2013] Using EEF radius (= 13.12 ")to estimate initial spatial extent for simple fitting [Sun May 5 02:22:54 2013] Initial guess for spatial extent in simple fitting = 13.12" [Sun May 5 02:22:54 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.992 [Sun May 5 02:22:54 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 13.12" [Sun May 5 02:22:55 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src24.ximg exists [Sun May 5 02:22:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src24.csv [Sun May 5 02:22:55 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src24_1.ximg exists [Sun May 5 02:22:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src24.csv [Sun May 5 02:22:55 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src24_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 02:22:55 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists [Sun May 5 02:22:55 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists [Sun May 5 02:22:55 2013] Fit fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly [Sun May 5 02:23:08 2013] Warning, spatial fit 24 centroid is now closest to src. 30 [Sun May 5 02:23:08 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 15.343532 pixels away [Sun May 5 02:23:08 2013] Vigneting correction estimate = 1.000000 [Sun May 5 02:23:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 02:23:08 2013] Assessing source extent using major [Sun May 5 02:23:08 2013] Source does appear to be extended [Sun May 5 02:23:08 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 02:23:08 2013] Source is confused with source 16 [Sun May 5 02:23:08 2013] Source is confused with source 8 [Sun May 5 02:23:08 2013] Source is confused with source 30 [Sun May 5 02:23:19 2013] Using EEF radius (= 13.12 ")to estimate initial spatial extent for simple fitting [Sun May 5 02:23:19 2013] Initial guess for spatial extent in simple fitting = 13.12" [Sun May 5 02:23:19 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.992 [Sun May 5 02:23:19 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 13.12" [Sun May 5 02:23:20 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src24.ximg exists [Sun May 5 02:23:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src24.csv [Sun May 5 02:23:20 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src24_1.ximg exists [Sun May 5 02:23:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src24.csv [Sun May 5 02:23:20 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src24_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 02:23:21 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists [Sun May 5 02:23:21 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists [Sun May 5 02:23:21 2013] Fit fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly [Sun May 5 02:23:35 2013] Source 18 is offset by 0.525418 and -9.159350 pixels which is larger than 2 X fitted extent = 1.509692 x 1.509692, not incorporating fit results [Sun May 5 02:23:35 2013] Source 18 is offset by -7.127294 and -0.812063 pixels which is larger than 2 X fitted extent = 1.466285 x 1.466285, not incorporating fit results [Sun May 5 02:23:35 2013] Warning, spatial fit 24 centroid is now closest to src. 8 [Sun May 5 02:23:35 2013] Vigneting correction estimate = 1.000000 [Sun May 5 02:23:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 02:23:35 2013] Assessing source extent using major [Sun May 5 02:23:35 2013] Source does appear to be extended [Sun May 5 02:23:35 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 02:23:56 2013] XMMSAS src. selection expression = ellipse(20970.959396, 41182.384521, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 5 02:23:56 2013] Not overwriting source region fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src18_src.reg [Sun May 5 02:23:56 2013] Extracting stamp from image fullrun_mos2_xmm0503740101_pi300-10000_cl_sm2.00.img.gz, (204, 436) - (279, 511) [Sun May 5 02:23:56 2013] XMMSAS bgd. selection expression = annulus(20970.959396, 41182.384521, 1087.500000, 2175.000000, X, Y) && !ellipse(21422.500000, 39685.954000, 3012.192087, 3012.192087, 0.000000, X, Y) && !ellipse(20833.982000, 40905.320000, 1990.496057, 1990.496057, 0.000000, X, Y) && !ellipse(21113.731800, 40455.428000, 1219.080035, 1219.080035, 0.000000, X, Y) && !ellipse(21785.096827, 39800.620122, 878.530207, 679.478758, 359.103210, X, Y) && !ellipse(21231.724426, 39125.974060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19930.890167, 40855.255707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20585.803589, 39619.283813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20626.886185, 40152.379181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20477.216000, 41389.978000, 2092.456060, 2092.456060, 0.000000, X, Y) && !ellipse(19747.528534, 41333.962799, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 5 02:23:56 2013] Writing fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src18.gif [Sun May 5 02:23:58 2013] ../../xmm0503740101/products/events/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src18_src.evt and ../../xmm0503740101/products/events/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src18_bgd.evt exist, delete to re-create [Sun May 5 02:23:58 2013] Mean detx,y = (-3761.62, -16802.31) [Sun May 5 02:23:58 2013] ../../xmm0503740101/products/images/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src18_src.img and ../../xmm0503740101/products/images/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src18_bgd.img exist, delete to re-create [Sun May 5 02:23:58 2013] ../../xmm0503740101/products/spectra/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src18_src_b10.pi.gz and ../../xmm0503740101/products/spectra/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src18_bgd.pi exist, delete to re-create [Sun May 5 02:23:58 2013] Setting source spectrum file to fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src18_src_b10.pi.gz [Sun May 5 02:23:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src18_bgd.pi.gz [Sun May 5 02:23:58 2013] ../../xmm0503740101/products/lightcurves/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src18_src.lc and ../../xmm0503740101/products/lightcurves/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src18_bgd.lc exist, delete to re-create [Sun May 5 02:51:55 2013] Not generating rmf since there are only 83 counts [Sun May 5 02:51:55 2013] rmf not generated due to insufficient counts [Sun May 5 02:57:55 2013] Updating aperture counts using extracted products [Sun May 5 02:57:55 2013] Total counts from fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 448.00 [Sun May 5 02:57:55 2013] Total counts from fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src18_bgd.pi.gz = 0.00 [Sun May 5 02:57:55 2013] Got source and background scale factors 1146354.000000, 179.000000 [Sun May 5 02:57:55 2013] User source parameters: Position = (241.6, 473.9) = 19 29 45.88 18 12 22.5 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 448.0 +/- 22.2 Background aperture counts = 0.0 Rate = 0.009 +/- 0.0005 [Sun May 5 02:57:55 2013] Updating counts from extracted products [Sun May 5 02:57:56 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 5 02:57:56 2013] Using photon index=1.80, rate=0.00934, arf fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src18.arf [Sun May 5 02:57:56 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 5 02:57:56 2013] Updating source flux to 5.1e-13 [Sun May 5 02:58:06 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun May 5 02:58:11 2013] xmm0503740101/analysis//spectral/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete