[Sun May  5 02:22:34 2013] Detection parameters:
  Position = (443.8, 215.2) = 19 28 44.24 17 53 30.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.0 +/- 13.6
  Background counts = 41.3
  Rate = 0.001 +/- 0.0003

[Sun May  5 02:22:35 2013] Off-axis axis estimate = 12.14'
[Sun May  5 02:22:54 2013] Using EEF radius (= 12.50 ")to estimate initial spatial extent for simple fitting
[Sun May  5 02:22:54 2013] Initial guess for spatial extent in simple fitting = 12.50"
[Sun May  5 02:22:54 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.076
[Sun May  5 02:22:54 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 12.50"
[Sun May  5 02:22:55 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src27.ximg exists
[Sun May  5 02:22:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src27.csv
[Sun May  5 02:22:55 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src27_1.ximg exists
[Sun May  5 02:22:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src27.csv
[Sun May  5 02:22:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 02:22:55 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sun May  5 02:22:55 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sun May  5 02:22:55 2013] Fit fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sun May  5 02:23:08 2013] Spatial fit model total counts = 338.300000, observed total counts = 322.000000
[Sun May  5 02:23:08 2013] Offset between fit and detection position for source 17 = 0.256445 pixels
[Sun May  5 02:23:08 2013] 339.371000 total counts/ 286.946000 bgd. counts: snr = 3.094841
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.256445 pixels
  Position = (443.8, 215.0) = 19 28 44.22 17 53 31.6
  Extent = 6.3 (4.4-9.3)", rotation angle = 0
  Source counts = 52.4 +/- 18.4
  Background counts = 286.9
  Rate = 0.001 +/- 0.0004
[Sun May  5 02:23:08 2013] Vigneting correction estimate = 1.000000
[Sun May  5 02:23:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 02:23:08 2013] Assessing source extent using major axis lower bound
[Sun May  5 02:23:08 2013] Source does appear to be extended
[Sun May  5 02:23:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 02:23:19 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  5 02:23:19 2013] Initial guess for spatial extent in simple fitting = 6.33"
[Sun May  5 02:23:19 2013] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.046
[Sun May  5 02:23:19 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 6.33"
[Sun May  5 02:23:20 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src27.ximg exists
[Sun May  5 02:23:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src27.csv
[Sun May  5 02:23:20 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src27_1.ximg exists
[Sun May  5 02:23:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src27.csv
[Sun May  5 02:23:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 02:23:21 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sun May  5 02:23:21 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sun May  5 02:23:21 2013] Fit fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Sun May  5 02:23:35 2013] Spatial fit model total counts = 311.000000, observed total counts = 311.000000
[Sun May  5 02:23:35 2013] Offset between fit and detection position for source 17 = 0.039379 pixels
[Sun May  5 02:23:35 2013] 311.609000 total counts/ 259.266000 bgd. counts: snr = 3.250767
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.039379 pixels
  Position = (443.8, 214.9) = 19 28 44.22 17 53 31.5
  Extent = 6.3 (4.4-9.1)", rotation angle = 0
  Source counts = 52.3 +/- 17.7
  Background counts = 259.3
  Rate = 0.001 +/- 0.0004
[Sun May  5 02:23:35 2013] Vigneting correction estimate = 1.000000
[Sun May  5 02:23:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 02:23:35 2013] Assessing source extent using major axis lower bound
[Sun May  5 02:23:35 2013] Source does appear to be extended
[Sun May  5 02:23:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 02:23:56 2013] XMMSAS src. selection expression = ellipse(38566.410220, 18650.963800, 377.361611, 377.361611, 0.000000, X, Y)
[Sun May  5 02:23:56 2013] Not overwriting source region fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src17_src.reg
[Sun May  5 02:23:56 2013] Extracting stamp from image fullrun_mos2_xmm0503740101_pi300-10000_cl_sm2.00.img.gz, (422, 193) - (466, 237)
[Sun May  5 02:23:56 2013] XMMSAS bgd. selection expression = annulus(38566.410220, 18650.963800, 628.936018, 1257.872036, X, Y)
[Sun May  5 02:23:56 2013] Writing fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src17.gif
[Sun May  5 02:23:58 2013] ../../xmm0503740101/products/events/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src17_src.evt and ../../xmm0503740101/products/events/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src17_bgd.evt exist, delete to re-create
[Sun May  5 02:23:58 2013] Mean detx,y = (13822.92, 5663.21) 
[Sun May  5 02:23:58 2013] ../../xmm0503740101/products/images/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src17_src.img and ../../xmm0503740101/products/images/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src17_bgd.img exist, delete to re-create
[Sun May  5 02:23:58 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May  5 02:24:10 2013] Binned source spectrum to 10 counts/bin
[Sun May  5 02:24:10 2013] Setting source spectrum file to fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun May  5 02:24:10 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sun May  5 02:56:18 2013] Not generating rmf since there are only 52 counts
[Sun May  5 02:56:18 2013] rmf not generated due to insufficient counts
[Sun May  5 02:57:55 2013] Updating aperture counts using extracted products
[Sun May  5 02:57:55 2013] Total counts from fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 110.00
[Sun May  5 02:57:55 2013] Total counts from fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src17_bgd.pi.gz = 320.00
[Sun May  5 02:57:55 2013] Got source and background scale factors 414228.000000, 2529210.000000
[Sun May  5 02:57:55 2013] User source parameters:
  Position = (443.8, 214.9) = 19 28 44.22 17 53 31.5
  Extent = 6.3 (4.4-9.1)", rotation angle = 0
  Source aperture counts = 57.6 +/- 11.5
  Background aperture counts = 52.4
  Rate = 0.001 +/- 0.0002

[Sun May  5 02:57:56 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 02:57:56 2013] Using photon index=1.80, rate=0.00109, arf fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src17.arf
[Sun May  5 02:57:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 02:57:56 2013] Updating source flux to 7.5e-14
[Sun May  5 02:58:06 2013] Source 17 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May  5 02:58:11 2013] xmm0503740101/analysis//spectral/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete