[Sun May 5 02:22:34 2013] Detection parameters: Position = (244.6, 450.3) = 19 29 44.96 18 10 37.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 110.4 +/- 17.8 Background counts = 48.0 Rate = 0.002 +/- 0.0003 [Sun May 5 02:22:35 2013] Off-axis axis estimate = 11.68' [Sun May 5 02:22:54 2013] Using EEF radius (= 12.27 ")to estimate initial spatial extent for simple fitting [Sun May 5 02:22:54 2013] Initial guess for spatial extent in simple fitting = 12.27" [Sun May 5 02:22:54 2013] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.111 [Sun May 5 02:22:54 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 12.27" [Sun May 5 02:22:55 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src19.ximg exists [Sun May 5 02:22:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src19.csv [Sun May 5 02:22:55 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src19_1.ximg exists [Sun May 5 02:22:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src19.csv [Sun May 5 02:22:55 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src19_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 02:22:55 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists [Sun May 5 02:22:55 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists [Sun May 5 02:22:55 2013] Fit fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly [Sun May 5 02:23:08 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 15.872383 pixels away [Sun May 5 02:23:08 2013] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 14.431840 pixels away [Sun May 5 02:23:08 2013] Vigneting correction estimate = 1.000000 [Sun May 5 02:23:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 02:23:08 2013] Assessing source extent using major [Sun May 5 02:23:08 2013] Source does appear to be extended [Sun May 5 02:23:08 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 02:23:19 2013] Using EEF radius (= 12.27 ")to estimate initial spatial extent for simple fitting [Sun May 5 02:23:19 2013] Initial guess for spatial extent in simple fitting = 12.27" [Sun May 5 02:23:19 2013] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.111 [Sun May 5 02:23:19 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 12.27" [Sun May 5 02:23:20 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src19.ximg exists [Sun May 5 02:23:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src19.csv [Sun May 5 02:23:20 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src19_1.ximg exists [Sun May 5 02:23:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src19.csv [Sun May 5 02:23:20 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src19_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 02:23:21 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists [Sun May 5 02:23:21 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists [Sun May 5 02:23:21 2013] Fit fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly [Sun May 5 02:23:35 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 15.872383 pixels away [Sun May 5 02:23:35 2013] Source 11 is offset by -3.444662 and 5.326254 pixels which is larger than 2 X fitted extent = 1.443117 x 1.443117, not incorporating fit results [Sun May 5 02:23:35 2013] Vigneting correction estimate = 1.000000 [Sun May 5 02:23:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 02:23:35 2013] Assessing source extent using major [Sun May 5 02:23:35 2013] Source does appear to be extended [Sun May 5 02:23:35 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 02:23:35 2013] Source is confused with source 10 [Sun May 5 02:23:55 2013] XMMSAS src. selection expression = ellipse(21231.724426, 39125.974060, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 5 02:23:55 2013] Not overwriting source region fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src11_src.reg [Sun May 5 02:23:55 2013] Extracting stamp from image fullrun_mos2_xmm0503740101_pi300-10000_cl_sm2.00.img.gz, (207, 413) - (282, 488) [Sun May 5 02:23:55 2013] XMMSAS bgd. selection expression = annulus(21231.724426, 39125.974060, 1087.500000, 2175.000000, X, Y) && !ellipse(21422.500000, 39685.954000, 3012.192087, 3012.192087, 0.000000, X, Y) && !ellipse(20833.982000, 40905.320000, 1990.496057, 1990.496057, 0.000000, X, Y) && !ellipse(21113.731800, 40455.428000, 1219.080035, 1219.080035, 0.000000, X, Y) && !ellipse(21785.096827, 39800.620122, 878.530207, 679.478758, 359.103210, X, Y) && !ellipse(19930.890167, 40855.255707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20585.803589, 39619.283813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20626.886185, 40152.379181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20970.959396, 41182.384521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20477.216000, 41389.978000, 2092.456060, 2092.456060, 0.000000, X, Y) && !ellipse(19747.528534, 41333.962799, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 5 02:23:55 2013] Writing fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src11.gif [Sun May 5 02:23:58 2013] ../../xmm0503740101/products/events/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0503740101/products/events/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create [Sun May 5 02:23:58 2013] Mean detx,y = (-3476.03, -14893.37) [Sun May 5 02:23:58 2013] ../../xmm0503740101/products/images/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src11_src.img and ../../xmm0503740101/products/images/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create [Sun May 5 02:23:58 2013] ../../xmm0503740101/products/spectra/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src11_src_b10.pi.gz and ../../xmm0503740101/products/spectra/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create [Sun May 5 02:23:58 2013] Setting source spectrum file to fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src11_src_b10.pi.gz [Sun May 5 02:23:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src11_bgd.pi.gz [Sun May 5 02:23:58 2013] ../../xmm0503740101/products/lightcurves/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0503740101/products/lightcurves/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create [Sun May 5 02:51:26 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun May 5 02:51:26 2013] rmf not generated due to insufficient counts [Sun May 5 02:57:54 2013] Updating aperture counts using extracted products [Sun May 5 02:57:54 2013] Total counts from fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 547.00 [Sun May 5 02:57:54 2013] Total counts from fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src11_bgd.pi.gz = 0.00 [Sun May 5 02:57:54 2013] Got source and background scale factors 1255804.000000, 0.000000 [Sun May 5 02:57:54 2013] Background scale factor is not positive, halting re-assessment of this source [Sun May 5 02:57:56 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 5 02:57:56 2013] Using photon index=1.80, rate=0.00207, arf fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src11.arf [Sun May 5 02:57:56 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 5 02:57:56 2013] Updating source flux to 9.2e-14 [Sun May 5 02:58:06 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun May 5 02:58:11 2013] xmm0503740101/analysis//spectral/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete