[Sun May 5 02:22:34 2013] Detection parameters: Position = (244.4, 459.0) = 19 29 45.01 18 11 13.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 144.2 +/- 19.6 Background counts = 55.2 Rate = 0.003 +/- 0.0004 [Sun May 5 02:22:35 2013] Off-axis axis estimate = 12.28' [Sun May 5 02:22:54 2013] Using EEF radius (= 12.57 ")to estimate initial spatial extent for simple fitting [Sun May 5 02:22:54 2013] Initial guess for spatial extent in simple fitting = 12.57" [Sun May 5 02:22:54 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.914 [Sun May 5 02:22:54 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 12.57" [Sun May 5 02:22:54 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src13.ximg exists [Sun May 5 02:22:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src13.csv [Sun May 5 02:22:55 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src13_1.ximg exists [Sun May 5 02:22:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src13.csv [Sun May 5 02:22:55 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src13_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 02:22:55 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists [Sun May 5 02:22:55 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists [Sun May 5 02:22:55 2013] Fit fullrun_mos2_xmm0503740101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly [Sun May 5 02:23:08 2013] Warning, spatial fit 13 centroid is now closest to src. 23 [Sun May 5 02:23:08 2013] Vigneting correction estimate = 1.000000 [Sun May 5 02:23:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 02:23:08 2013] Assessing source extent using major [Sun May 5 02:23:08 2013] Source does appear to be extended [Sun May 5 02:23:08 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 02:23:08 2013] Source is confused with source 16 [Sun May 5 02:23:08 2013] Source is confused with source 8 [Sun May 5 02:23:08 2013] Source is confused with source 9 [Sun May 5 02:23:08 2013] Source is confused with source 21 [Sun May 5 02:23:19 2013] Using EEF radius (= 12.57 ")to estimate initial spatial extent for simple fitting [Sun May 5 02:23:19 2013] Initial guess for spatial extent in simple fitting = 12.57" [Sun May 5 02:23:19 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.914 [Sun May 5 02:23:19 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 12.57" [Sun May 5 02:23:20 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src13.ximg exists [Sun May 5 02:23:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src13.csv [Sun May 5 02:23:20 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src13_1.ximg exists [Sun May 5 02:23:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src13.csv [Sun May 5 02:23:20 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src13_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 02:23:21 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists [Sun May 5 02:23:21 2013] fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists [Sun May 5 02:23:21 2013] Fit fullrun_mos2_xmm0503740101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly [Sun May 5 02:23:35 2013] Spatial fit model total counts = 1123.530000, observed total counts = 1123.000000 [Sun May 5 02:23:35 2013] Offset between fit and detection position for source 10 = 3.888706 pixels [Sun May 5 02:23:35 2013] 1021.423000 total counts/ 656.827000 bgd. counts: snr = 14.226118 Spatial fit parameters: Offset between fit and detection position for source 10 = 3.888706 pixels Position = (247.4, 456.4) = 19 29 44.12 18 11 2.1 Extent = 25.1 (25.1-50.3)", rotation angle = 0 Source counts = 364.6 +/- 32.0 Background counts = 656.8 Rate = 0.008 +/- 0.0007 [Sun May 5 02:23:35 2013] Spatial fit model total counts = 1964.980000, observed total counts = 1964.000000 [Sun May 5 02:23:35 2013] Offset between fit and detection position for source 10 = 0.642939 pixels [Sun May 5 02:23:35 2013] Warning, changing simple spatial fit ID from 13 to 16 [Sun May 5 02:23:35 2013] 1824.482000 total counts/ 914.121000 bgd. counts: snr = 30.110072 Spatial fit parameters: Offset between fit and detection position for source 10 = 0.642939 pixels Position = (246.8, 456.7) = 19 29 44.29 18 11 3.5 Extent = 37.7 (37.3-37.8)", rotation angle = 0 Source counts = 910.4 +/- 42.7 Background counts = 914.1 Rate = 0.02 +/- 0.0009 [Sun May 5 02:23:35 2013] Vigneting correction estimate = 1.000000 [Sun May 5 02:23:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 02:23:35 2013] Assessing source extent using major axis lower bound [Sun May 5 02:23:35 2013] Source does appear to be extended [Sun May 5 02:23:35 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 02:23:55 2013] XMMSAS src. selection expression = ellipse(21422.500000, 39685.954000, 2259.144065, 2259.144065, 0.000000, X, Y) [Sun May 5 02:23:55 2013] Not overwriting source region fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src10_src.reg [Sun May 5 02:23:55 2013] Extracting stamp from image fullrun_mos2_xmm0503740101_pi300-10000_cl_sm2.00.img.gz, (117, 327) - (377, 587) [Sun May 5 02:23:55 2013] XMMSAS bgd. selection expression = annulus(21422.500000, 39685.954000, 3765.240108, 7530.480217, X, Y) && !ellipse(25653.304016, 32811.159454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22608.558899, 34806.074127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21068.626600, 34220.117000, 380.496811, 380.496811, 0.000000, X, Y) && !ellipse(20833.982000, 40905.320000, 1990.496057, 1990.496057, 0.000000, X, Y) && !ellipse(21113.731800, 40455.428000, 1219.080035, 1219.080035, 0.000000, X, Y) && !ellipse(21785.096827, 39800.620122, 878.530207, 679.478758, 359.103210, X, Y) && !ellipse(21231.724426, 39125.974060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19930.890167, 40855.255707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20585.803589, 39619.283813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20626.886185, 40152.379181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20970.959396, 41182.384521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20477.216000, 41389.978000, 2092.456060, 2092.456060, 0.000000, X, Y) && !ellipse(19747.528534, 41333.962799, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 5 02:23:55 2013] Writing fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src10.gif [Sun May 5 02:23:58 2013] ../../xmm0503740101/products/events/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0503740101/products/events/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create [Sun May 5 02:23:58 2013] Mean detx,y = (-3481.29, -15410.03) [Sun May 5 02:23:58 2013] ../../xmm0503740101/products/images/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src10_src.img and ../../xmm0503740101/products/images/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create [Sun May 5 02:23:58 2013] ../../xmm0503740101/products/spectra/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0503740101/products/spectra/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create [Sun May 5 02:23:58 2013] Setting source spectrum file to fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src10_src_b10.pi.gz [Sun May 5 02:23:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src10_bgd.pi.gz [Sun May 5 02:23:58 2013] ../../xmm0503740101/products/lightcurves/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0503740101/products/lightcurves/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create [Sun May 5 02:57:53 2013] Updating aperture counts using extracted products [Sun May 5 02:57:53 2013] Total counts from fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 4325.00 [Sun May 5 02:57:53 2013] Total counts from fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src10_bgd.pi.gz = 10036.00 [Sun May 5 02:57:53 2013] Got source and background scale factors 14913440.000000, 65383060.000000 [Sun May 5 02:57:53 2013] User source parameters: Position = (246.8, 456.7) = 19 29 44.29 18 11 3.5 Extent = 37.7 (37.3-37.8)", rotation angle = 0 Source aperture counts = 2035.9 +/- 66.8 Background aperture counts = 2289.1 Rate = 0.04 +/- 0.001 [Sun May 5 02:57:56 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 5 02:57:56 2013] Using photon index=1.80, rate=0.019, arf fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src10.arf [Sun May 5 02:57:56 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 5 02:57:56 2013] Updating source flux to 6.8e-13 [Sun May 5 02:58:06 2013] Flag c found in src. 10 procflags, skipping spectral fitting [Sun May 5 02:58:11 2013] xmm0503740101/analysis//spectral/fullrun_mos2_xmm0503740101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete