[Mon Mar 26 13:14:45 2012] Detection parameters:
  Position = (280.4, 306.9) = 4 53 10.07 -66 54 17.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 352.5 +/- 30.9
  Background counts = 150.2
  Rate = 0.01 +/- 0.001

[Mon Mar 26 13:14:45 2012] Off-axis axis estimate = 1.45'
[Mon Mar 26 13:20:37 2012] Using EEF radius (= 7.15 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 13:20:37 2012] Initial guess for spatial extent in simple fitting = 7.15"
[Mon Mar 26 13:20:37 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.088
[Mon Mar 26 13:20:37 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.15"
[Mon Mar 26 14:07:26 2012] fullrun_pn_xmm0503710101_pi300-10000_cl_pass0_src9.ximg exists
[Mon Mar 26 14:07:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503710101_pi300-10000_cl_pass0_src9.csv
[Mon Mar 26 14:07:26 2012] fullrun_pn_xmm0503710101_pi300-10000_cl_pass0_src9_1.ximg exists
[Mon Mar 26 14:07:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503710101_pi300-10000_cl_pass0_src9.csv
[Mon Mar 26 14:07:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503710101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503710101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 14:07:26 2012] fullrun_pn_xmm0503710101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Mon Mar 26 14:07:26 2012] fullrun_pn_xmm0503710101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Mar 26 14:07:26 2012] Fit fullrun_pn_xmm0503710101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Mon Mar 26 15:31:43 2012] Spatial fit model total counts = 1478.520000, observed total counts = 1476.000000
[Mon Mar 26 15:31:43 2012] Offset between fit and detection position for source 9 = 2.574377 pixels
[Mon Mar 26 15:31:43 2012] 1473.760000 total counts/ 1247.460000 bgd. counts: snr = 6.407244
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 2.574377 pixels
  Position = (280.4, 304.4) = 4 53 10.05 -66 54 28.1
  Extent = 14.3 (14.3-28.6)", rotation angle = 0
  Source counts = 226.3 +/- 38.4
  Background counts = 1247.5
  Rate = 0.02 +/- 0.003
[Mon Mar 26 15:31:43 2012] Source 9 is offset by 0.862871 and 1.784782 pixels which is larger than
2 X fitted extent = 1.563163 x 1.563163, not incorporating fit results
[Mon Mar 26 15:31:43 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 15:31:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 15:31:43 2012] Assessing source extent using major axis lower bound
[Mon Mar 26 15:31:43 2012] Source does appear to be extended
[Mon Mar 26 15:31:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 15:31:43 2012] Source is confused with source 6
[Mon Mar 26 15:32:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Mar 26 15:32:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Mar 26 15:32:00 2012] Initial guess for spatial extent in simple fitting = 14.30"
[Mon Mar 26 15:32:00 2012] source mask rpix=3.3, npix_max = 57, mask sum = 49, frac = 0.854
[Mon Mar 26 15:32:00 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 14.30"
[Mon Mar 26 16:36:16 2012] fullrun_pn_xmm0503710101_pi300-10000_cl_pass1_src9.ximg exists
[Mon Mar 26 16:36:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503710101_pi300-10000_cl_pass1_src9.csv
[Mon Mar 26 16:36:16 2012] fullrun_pn_xmm0503710101_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon Mar 26 16:36:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503710101_pi300-10000_cl_pass1_src9.csv
[Mon Mar 26 16:36:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503710101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503710101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 16:36:17 2012] fullrun_pn_xmm0503710101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon Mar 26 16:36:17 2012] fullrun_pn_xmm0503710101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Mar 26 16:36:17 2012] Fit fullrun_pn_xmm0503710101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Mar 26 18:14:23 2012] Warning, spatial fit 9 centroid is now closest to src. 10
[Mon Mar 26 18:14:23 2012] Source 9 is offset by 0.880366 and 1.781977 pixels which is larger than
2 X fitted extent = 1.552915 x 1.552915, not incorporating fit results
[Mon Mar 26 18:14:23 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 18:14:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 18:14:23 2012] Assessing source extent using major axis lower bound
[Mon Mar 26 18:14:23 2012] Source does appear to be extended
[Mon Mar 26 18:14:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 18:14:41 2012] XMMSAS src. selection expression = ellipse(24349.613800, 26432.066000, 858.156025, 858.156025, 0.000000, X, Y)
[Mon Mar 26 18:14:41 2012] Writing source region out to fullrun_pn_xmm0503710101_pi300-10000_pass1_cl_src9_src.reg
[Mon Mar 26 18:14:41 2012] Extracting stamp from image fullrun_pn_xmm0503710101_pi300-10000_cl_sm2.00.img.gz, (231, 255) - (330, 354)
[Mon Mar 26 18:14:41 2012] XMMSAS bgd. selection expression = annulus(24349.613800, 26432.066000, 1430.260041, 2860.520082, X, Y) && !ellipse(25417.817400, 27793.667080, 735.536821, 735.536821, 0.000000, X, Y) && !ellipse(23548.083496, 27292.755402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23444.273600, 26858.123000, 1195.112034, 1195.112034, 0.000000, X, Y) && !ellipse(23409.668854, 26239.053925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23224.000000, 25404.729553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23895.804718, 25625.550995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25822.059200, 25728.170800, 1218.040035, 1218.040035, 0.000000, X, Y)
[Mon Mar 26 18:14:41 2012] Writing fullrun_pn_xmm0503710101_pi300-10000_pass1_cl_src9.gif
[Mon Mar 26 18:24:43 2012] Mean detx,y = (411.69, 675.89) 
[Mon Mar 26 18:24:47 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 18:25:33 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 18:25:34 2012] Setting source spectrum file to fullrun_pn_xmm0503710101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Mar 26 18:25:34 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503710101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Mon Mar 26 20:39:30 2012] Updating aperture counts using extracted products
[Mon Mar 26 20:39:31 2012] Error reading totcts from fullrun_pn_xmm0503710101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Mar 26 20:39:31 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 20:39:31 2012] Using photon index=1.80, rate=0.0162, arf fullrun_pn_xmm0503710101_pi300-10000_pass1_cl_src9.arf
[Mon Mar 26 20:39:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 20:39:31 2012] Updating source flux to 3.9e-14
[Mon Mar 26 20:43:18 2012] Flag b found in src. 9 procflags, skipping spectral fitting
[Mon Mar 26 20:43:18 2012] Flag c found in src. 9 procflags, skipping spectral fitting