[Mon Mar 26 13:15:12 2012] Detection parameters:
  Position = (198.0, 458.1) = 4 54 10.41 -66 43 16.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1790.8 +/- 52.9
  Background counts = 71.4
  Rate = 0.05 +/- 0.002

[Mon Mar 26 13:15:13 2012] Off-axis axis estimate = 13.68'
[Mon Mar 26 14:07:26 2012] Using EEF radius (= 13.27 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 14:07:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Mar 26 14:07:26 2012] Initial guess for spatial extent in simple fitting = 13.27"
[Mon Mar 26 14:07:26 2012] source mask rpix=3.0, npix_max = 50, mask sum = 56, frac = 1.111
[Mon Mar 26 14:07:26 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.27"
[Mon Mar 26 14:49:00 2012] fullrun_mos1_xmm0503710101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Mar 26 14:49:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503710101_pi300-10000_cl_pass0_src1.csv
[Mon Mar 26 14:49:00 2012] fullrun_mos1_xmm0503710101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Mar 26 14:49:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503710101_pi300-10000_cl_pass0_src1.csv
[Mon Mar 26 14:49:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503710101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503710101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 14:49:00 2012] fullrun_mos1_xmm0503710101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Mar 26 14:49:00 2012] fullrun_mos1_xmm0503710101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Mar 26 14:49:00 2012] Fit fullrun_mos1_xmm0503710101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Mar 26 15:31:46 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 17.147284 pixels away
[Mon Mar 26 15:31:46 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 15:31:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 15:31:46 2012] Assessing source extent using major
[Mon Mar 26 15:31:46 2012] Source does appear to be extended
[Mon Mar 26 15:31:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 16:36:17 2012] Using EEF radius (= 13.27 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 16:36:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Mar 26 16:36:17 2012] Initial guess for spatial extent in simple fitting = 13.27"
[Mon Mar 26 16:36:17 2012] source mask rpix=3.0, npix_max = 50, mask sum = 56, frac = 1.111
[Mon Mar 26 16:36:17 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.27"
[Mon Mar 26 17:24:36 2012] fullrun_mos1_xmm0503710101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Mar 26 17:24:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503710101_pi300-10000_cl_pass1_src1.csv
[Mon Mar 26 17:24:36 2012] fullrun_mos1_xmm0503710101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Mar 26 17:24:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503710101_pi300-10000_cl_pass1_src1.csv
[Mon Mar 26 17:24:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503710101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503710101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 17:24:36 2012] fullrun_mos1_xmm0503710101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Mar 26 17:24:36 2012] fullrun_mos1_xmm0503710101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Mar 26 17:24:36 2012] Fit fullrun_mos1_xmm0503710101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Mar 26 18:14:27 2012] Spatial fit model total counts = 1981.430000, observed total counts = 1979.000000
[Mon Mar 26 18:14:27 2012] Offset between fit and detection position for source 1 = 0.225559 pixels
[Mon Mar 26 18:14:27 2012] 1984.227000 total counts/ 958.587000 bgd. counts: snr = 33.126777
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.225559 pixels
  Position = (197.8, 458.2) = 4 54 10.57 -66 43 18.0
  Extent = 6.8 (6.5-7.2)", rotation angle = 0
  Source counts = 1025.6 +/- 44.5
  Background counts = 958.6
  Rate = 0.04 +/- 0.002
[Mon Mar 26 18:14:27 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 18:14:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 18:14:27 2012] Assessing source extent using major axis lower bound
[Mon Mar 26 18:14:27 2012] Source does appear to be extended
[Mon Mar 26 18:14:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 19:16:15 2012] Counts = 1025.640000, rescaling region sizes by 2.000000
[Mon Mar 26 19:16:15 2012] XMMSAS src. selection expression = ellipse(17162.554200, 39814.060400, 821.060424, 821.060424, 0.000000, X, Y)
[Mon Mar 26 19:16:15 2012] Writing source region out to fullrun_mos1_xmm0503710101_pi300-10000_pass1_cl_src1_src.reg
[Mon Mar 26 19:16:15 2012] Extracting stamp from image fullrun_mos1_xmm0503710101_pi300-10000_cl_sm2.00.img.gz, (151, 411) - (245, 505)
[Mon Mar 26 19:16:15 2012] XMMSAS bgd. selection expression = annulus(17162.554200, 39814.060400, 2736.868079, 5473.736158, X, Y)
[Mon Mar 26 19:16:15 2012] Writing fullrun_mos1_xmm0503710101_pi300-10000_pass1_cl_src1.gif
[Mon Mar 26 19:16:20 2012] Mean detx,y = (-4484.86, 14757.35) 
[Mon Mar 26 19:16:22 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 19:18:07 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 19:18:07 2012] Setting source spectrum file to fullrun_mos1_xmm0503710101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 26 19:18:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503710101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Mar 26 20:39:31 2012] Updating aperture counts using extracted products
[Mon Mar 26 20:39:32 2012] Error reading totcts from fullrun_mos1_xmm0503710101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 26 20:39:32 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 20:39:32 2012] Using photon index=1.80, rate=0.0379, arf fullrun_mos1_xmm0503710101_pi300-10000_pass1_cl_src1.arf
[Mon Mar 26 20:39:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 20:39:32 2012] Updating source flux to 8.1e-13
[Mon Mar 26 20:41:10 2012] Reading fit data from xmm0503710101/analysis//spectral/fullrun_mos1_xmm0503710101_pi300-10000_pass1_cl_src1_pl.csv
[Mon Mar 26 20:41:10 2012] Spectral fit parameter nH value = 1.70236e+21
[Mon Mar 26 20:41:10 2012] Spectral fit parameter PhoIndex value = 2.30573
[Mon Mar 26 20:41:10 2012] Failed to get F(0.3-8.0) from xmm0503710101/analysis//spectral/fullrun_mos1_xmm0503710101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Mar 26 20:41:10 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 20:41:10 2012] Using Nh = 1.7e+21, photon index=2.31, rate=0.0379, arf fullrun_mos1_xmm0503710101_pi300-10000_pass1_cl_src1.arf
[Mon Mar 26 20:41:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 20:41:10 2012] Updating source flux to 7.4e-13