[Thu Mar 22 00:50:43 2012] Detection parameters:
  Position = (335.8, 435.1) = 2 44 21.90 62 38 54.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.5 +/- 21.9
  Background counts = 114.2
  Rate = 0.004 +/- 0.0007

[Thu Mar 22 00:50:43 2012] Off-axis axis estimate = 10.28'
[Thu Mar 22 00:56:13 2012] Using EEF radius (= 11.57 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 00:56:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 22 00:56:13 2012] Initial guess for spatial extent in simple fitting = 11.57"
[Thu Mar 22 00:56:13 2012] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.902
[Thu Mar 22 00:56:13 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.57"
[Thu Mar 22 01:45:10 2012] fullrun_pn_xmm0503690401_pi300-10000_cl_pass0_src2.ximg exists
[Thu Mar 22 01:45:10 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0503690401_pi300-10000_cl_pass0_src2.csv
[Thu Mar 22 01:45:10 2012] fullrun_pn_xmm0503690401_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Mar 22 01:45:10 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0503690401_pi300-10000_cl_pass0_src2.csv
[Thu Mar 22 01:45:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503690401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503690401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 01:45:10 2012] fullrun_pn_xmm0503690401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Mar 22 01:45:10 2012] fullrun_pn_xmm0503690401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Mar 22 01:45:10 2012] Fit fullrun_pn_xmm0503690401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Mar 22 02:39:31 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.440564 pixels away
[Thu Mar 22 02:39:31 2012] Source 2 is offset by -4.236726 and 5.075407 pixels which is larger than
2 X fitted extent = 1.258354 x 1.258354, not incorporating fit results
[Thu Mar 22 02:39:31 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 02:39:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 02:39:31 2012] Assessing source extent using major
[Thu Mar 22 02:39:31 2012] Source does appear to be extended
[Thu Mar 22 02:39:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 02:39:45 2012] Using EEF radius (= 11.57 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 02:39:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 22 02:39:45 2012] Initial guess for spatial extent in simple fitting = 11.57"
[Thu Mar 22 02:39:45 2012] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.902
[Thu Mar 22 02:39:45 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.57"
[Thu Mar 22 03:25:35 2012] fullrun_pn_xmm0503690401_pi300-10000_cl_pass1_src2.ximg exists
[Thu Mar 22 03:25:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503690401_pi300-10000_cl_pass1_src2.csv
[Thu Mar 22 03:25:35 2012] fullrun_pn_xmm0503690401_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Mar 22 03:25:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503690401_pi300-10000_cl_pass1_src2.csv
[Thu Mar 22 03:25:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503690401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503690401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 03:25:35 2012] fullrun_pn_xmm0503690401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Mar 22 03:25:35 2012] fullrun_pn_xmm0503690401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Mar 22 03:25:35 2012] Fit fullrun_pn_xmm0503690401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Mar 22 03:59:42 2012] Spatial fit model total counts = 450.719000, observed total counts = 434.000000
[Thu Mar 22 03:59:42 2012] Offset between fit and detection position for source 2 = 0.416267 pixels
[Thu Mar 22 03:59:42 2012] 451.061200 total counts/ 387.471000 bgd. counts: snr = 3.230506
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.416267 pixels
  Position = (336.0, 435.5) = 2 44 21.80 62 38 56.9
  Extent = 7.9 (4.6-15.0)", rotation angle = 0
  Source counts = 63.6 +/- 21.2
  Background counts = 387.5
  Rate = 0.02 +/- 0.005
[Thu Mar 22 03:59:42 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 03:59:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 03:59:42 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 03:59:42 2012] Source does appear to be extended
[Thu Mar 22 03:59:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 03:59:55 2012] XMMSAS src. selection expression = ellipse(29181.495600, 37842.758200, 471.041414, 471.041414, 0.000000, X, Y)
[Thu Mar 22 03:59:55 2012] Writing source region out to fullrun_pn_xmm0503690401_pi300-10000_pass1_cl_src2_src.reg
[Thu Mar 22 03:59:55 2012] Extracting stamp from image fullrun_pn_xmm0503690401_pi300-10000_cl_sm2.00.img.gz, (309, 408) - (363, 463)
[Thu Mar 22 03:59:55 2012] XMMSAS bgd. selection expression = annulus(29181.495600, 37842.758200, 785.069023, 1570.138045, X, Y) && !ellipse(28647.898285, 36411.480072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27782.476910, 34197.845458, 2333.643408, 460.747863, 106.124493, X, Y)
[Thu Mar 22 03:59:55 2012] Writing fullrun_pn_xmm0503690401_pi300-10000_pass1_cl_src2.gif
[Thu Mar 22 04:05:18 2012] Mean detx,y = (130.92, 13796.64) 
[Thu Mar 22 04:05:22 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 04:05:41 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 04:05:42 2012] Setting source spectrum file to fullrun_pn_xmm0503690401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Mar 22 04:05:42 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503690401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Mar 22 04:41:08 2012] Not generating rmf since there are only 63 counts
[Thu Mar 22 04:41:08 2012] rmf not generated due to insufficient counts
[Thu Mar 22 05:45:49 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:45:49 2012] Error reading totcts from fullrun_pn_xmm0503690401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Mar 22 05:45:50 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:45:50 2012] Using photon index=1.80, rate=0.0155, arf fullrun_pn_xmm0503690401_pi300-10000_pass1_cl_src2.arf
[Thu Mar 22 05:45:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:45:50 2012] Updating source flux to 9.2e-14
[Thu Mar 22 05:47:33 2012] Flag b found in src. 2 procflags, skipping spectral fitting
[Thu Mar 22 05:47:33 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting