[Thu Mar 22 00:51:17 2012] Detection parameters:
  Position = (279.2, 285.9) = 2 44 57.55 62 28 6.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49870.2 +/- 268.4
  Background counts = 100.8
  Rate = 1 +/- 0.008

[Thu Mar 22 00:51:17 2012] Off-axis axis estimate = 1.66'
[Thu Mar 22 01:45:11 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 01:45:11 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Thu Mar 22 01:45:11 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Thu Mar 22 01:45:11 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Thu Mar 22 01:54:19 2012] fullrun_mos1_xmm0503690401_pi300-10000_cl_pass0_src1.ximg exists
[Thu Mar 22 01:54:19 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0503690401_pi300-10000_cl_pass0_src1.csv
[Thu Mar 22 01:54:19 2012] fullrun_mos1_xmm0503690401_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Mar 22 01:54:19 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0503690401_pi300-10000_cl_pass0_src1.csv
[Thu Mar 22 01:54:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503690401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503690401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 01:54:19 2012] fullrun_mos1_xmm0503690401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Mar 22 01:54:19 2012] fullrun_mos1_xmm0503690401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Mar 22 01:54:19 2012] Fit fullrun_mos1_xmm0503690401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Mar 22 02:39:33 2012] Spatial fit model total counts = 33987.800000, observed total counts = 33985.000000
[Thu Mar 22 02:39:33 2012] Offset between fit and detection position for source 1 = 0.059928 pixels
[Thu Mar 22 02:39:33 2012] 33983.240000 total counts/ 7473.240000 bgd. counts: snr = 306.658681
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.059928 pixels
  Position = (279.2, 285.9) = 2 44 57.54 62 28 6.0
  Extent = 5.9 (5.9-6.0)", rotation angle = 0
  Source counts = 26510.0 +/- 184.3
  Background counts = 7473.2
  Rate = 1 +/- 0.007
[Thu Mar 22 02:39:33 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 02:39:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 02:39:33 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 02:39:33 2012] Source does appear to be extended
[Thu Mar 22 02:39:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 03:25:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 22 03:25:35 2012] Initial guess for spatial extent in simple fitting = 5.94"
[Thu Mar 22 03:25:35 2012] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.150
[Thu Mar 22 03:25:35 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.94"
[Thu Mar 22 03:29:05 2012] fullrun_mos1_xmm0503690401_pi300-10000_cl_pass1_src1.ximg exists
[Thu Mar 22 03:29:05 2012] fullrun_mos1_xmm0503690401_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Mar 22 03:29:05 2012] Fit fullrun_mos1_xmm0503690401_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Mar 22 03:29:05 2012] fullrun_mos1_xmm0503690401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Mar 22 03:29:05 2012] fullrun_mos1_xmm0503690401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Mar 22 03:29:05 2012] Fit fullrun_mos1_xmm0503690401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Mar 22 03:59:43 2012] Spatial fit model total counts = 33984.900000, observed total counts = 33985.000000
[Thu Mar 22 03:59:43 2012] Offset between fit and detection position for source 1 = 0.001653 pixels
[Thu Mar 22 03:59:43 2012] 33982.480000 total counts/ 7471.880000 bgd. counts: snr = 306.693529
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001653 pixels
  Position = (279.2, 285.9) = 2 44 57.54 62 28 6.0
  Extent = 6.1 (6.0-6.1)" x 5.8 (5.7-5.9)", rotation angle = 28 (17-40) degrees
  Source counts = 26510.6 +/- 184.3
  Background counts = 7471.9
  Rate = 1 +/- 0.007
[Thu Mar 22 03:59:43 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 03:59:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 03:59:43 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 03:59:43 2012] Source does appear to be extended
[Thu Mar 22 03:59:43 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.02
[Thu Mar 22 05:00:52 2012] Counts = 26510.600000, rescaling region sizes by 3.000000
[Thu Mar 22 05:00:52 2012] XMMSAS src. selection expression = ellipse(24245.859200, 24821.548000, 1092.168031, 1045.953030, 27.541313, X, Y)
[Thu Mar 22 05:00:52 2012] Writing source region out to fullrun_mos1_xmm0503690401_pi300-10000_pass1_cl_src1_src.reg
[Thu Mar 22 05:00:52 2012] Extracting stamp from image fullrun_mos1_xmm0503690401_pi300-10000_cl_sm2.00.img.gz, (216, 223) - (342, 349)
[Thu Mar 22 05:00:52 2012] XMMSAS bgd. selection expression = annulus(24245.859200, 24821.548000, 5460.840157, 10921.680314, X, Y) && !ellipse(23311.860229, 23539.189148, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(14597.910706, 13623.876038, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 22 05:00:52 2012] Writing fullrun_mos1_xmm0503690401_pi300-10000_pass1_cl_src1.gif
[Thu Mar 22 05:01:06 2012] Mean detx,y = (215.41, -200.45) 
[Thu Mar 22 05:01:10 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 05:06:31 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 05:06:31 2012] Setting source spectrum file to fullrun_mos1_xmm0503690401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 22 05:06:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503690401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Mar 22 05:45:50 2012] Updating aperture counts using extracted products
[Thu Mar 22 05:45:51 2012] Error reading totcts from fullrun_mos1_xmm0503690401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 22 05:45:51 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:45:51 2012] Using photon index=1.80, rate=1.04, arf fullrun_mos1_xmm0503690401_pi300-10000_pass1_cl_src1.arf
[Thu Mar 22 05:45:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:45:51 2012] Updating source flux to 9.7e-12
[Thu Mar 22 05:46:19 2012] Reading fit data from xmm0503690401/analysis//spectral/fullrun_mos1_xmm0503690401_pi300-10000_pass1_cl_src1_pl.csv
[Thu Mar 22 05:46:19 2012] Spectral fit parameter nH value = 7.78061e+21
[Thu Mar 22 05:46:19 2012] Spectral fit parameter PhoIndex value = 1.65097
[Thu Mar 22 05:46:19 2012] Failed to get F(0.3-8.0) from xmm0503690401/analysis//spectral/fullrun_mos1_xmm0503690401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Mar 22 05:46:19 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 05:46:19 2012] Using Nh = 7.8e+21, photon index=1.65, rate=1.04, arf fullrun_mos1_xmm0503690401_pi300-10000_pass1_cl_src1.arf
[Thu Mar 22 05:46:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 05:46:19 2012] Updating source flux to 1.6e-11