[Thu Sep  6 00:36:05 2012] Detection parameters:
  Position = (319.7, 307.0) = 2 44 57.55 62 28 7.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 146069.0 +/- 452.8
  Background counts = 242.3
  Rate = 2 +/- 0.006

[Thu Sep  6 00:36:06 2012] Off-axis axis estimate = 1.66'
[Thu Sep  6 00:41:06 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 00:41:06 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Thu Sep  6 00:41:06 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Thu Sep  6 00:41:06 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Thu Sep  6 01:43:25 2012] fullrun_pn_xmm0503690101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Sep  6 01:43:25 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0503690101_pi300-10000_cl_pass0_src1.csv
[Thu Sep  6 01:43:25 2012] fullrun_pn_xmm0503690101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Sep  6 01:43:25 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0503690101_pi300-10000_cl_pass0_src1.csv
[Thu Sep  6 01:43:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503690101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503690101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 01:43:25 2012] fullrun_pn_xmm0503690101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep  6 01:43:25 2012] fullrun_pn_xmm0503690101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep  6 01:43:25 2012] Fit fullrun_pn_xmm0503690101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep  6 01:56:37 2012] Spatial fit model total counts = 99480.200000, observed total counts = 99203.000000
[Thu Sep  6 01:56:37 2012] Offset between fit and detection position for source 1 = 0.174300 pixels
[Thu Sep  6 01:56:37 2012] 99460.400000 total counts/ 20058.000000 bgd. counts: snr = 560.647405
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.174300 pixels
  Position = (319.5, 307.1) = 2 44 57.66 62 28 7.3
  Extent = 5.9 (5.9-6.0)", rotation angle = 0
  Source counts = 79402.4 +/- 315.4
  Background counts = 20058.0
  Rate = 2 +/- 0.009
[Thu Sep  6 01:56:37 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 01:56:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 01:56:37 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 01:56:37 2012] Source does appear to be extended
[Thu Sep  6 01:56:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 01:56:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep  6 01:56:46 2012] Initial guess for spatial extent in simple fitting = 5.95"
[Thu Sep  6 01:56:46 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.860
[Thu Sep  6 01:56:46 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.95"
[Thu Sep  6 02:55:28 2012] fullrun_pn_xmm0503690101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Sep  6 02:55:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503690101_pi300-10000_cl_pass1_src1.csv
[Thu Sep  6 02:55:28 2012] fullrun_pn_xmm0503690101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Sep  6 02:55:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503690101_pi300-10000_cl_pass1_src1.csv
[Thu Sep  6 02:55:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503690101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503690101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 02:55:28 2012] fullrun_pn_xmm0503690101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep  6 02:55:28 2012] fullrun_pn_xmm0503690101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep  6 02:55:28 2012] Fit fullrun_pn_xmm0503690101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep  6 03:03:08 2012] Spatial fit model total counts = 99335.200000, observed total counts = 99141.000000
[Thu Sep  6 03:03:08 2012] Offset between fit and detection position for source 1 = 0.013600 pixels
[Thu Sep  6 03:03:08 2012] 99620.100000 total counts/ 20620.000000 bgd. counts: snr = 550.152778
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.013600 pixels
  Position = (319.5, 307.1) = 2 44 57.67 62 28 7.3
  Extent = 5.9 (5.9-5.9)", rotation angle = 0
  Source counts = 79000.1 +/- 315.6
  Background counts = 20620.0
  Rate = 2 +/- 0.009
[Thu Sep  6 03:03:09 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 03:03:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 03:03:09 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 03:03:09 2012] Source does appear to be extended
[Thu Sep  6 03:03:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 03:03:18 2012] Counts = 79000.100000, rescaling region sizes by 3.000000
[Thu Sep  6 03:03:18 2012] XMMSAS src. selection expression = ellipse(27747.521000, 26666.093400, 1064.498431, 1064.498431, 0.000000, X, Y)
[Thu Sep  6 03:03:18 2012] Writing source region out to fullrun_pn_xmm0503690101_pi300-10000_pass1_cl_src1_src.reg
[Thu Sep  6 03:03:18 2012] Extracting stamp from image fullrun_pn_xmm0503690101_pi300-10000_cl_sm2.00.img.gz, (258, 246) - (381, 368)
[Thu Sep  6 03:03:18 2012] XMMSAS bgd. selection expression = annulus(27747.521000, 26666.093400, 5322.492153, 10644.984306, X, Y) && !ellipse(17545.323776, 31421.060455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18000.269684, 15766.345291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38651.143311, 31609.663116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21214.788600, 15535.417400, 1862.264054, 419.909612, 122.441500, X, Y) && !ellipse(26257.108124, 35512.646454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37895.581300, 33382.228600, 621.508818, 621.508818, 0.000000, X, Y) && !ellipse(21474.885284, 33036.550201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21634.675000, 29284.530600, 363.688967, 363.688967, 0.000000, X, Y) && !ellipse(35011.533569, 28755.111023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27626.667816, 28206.773132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17371.360947, 27770.705811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29140.002655, 27394.289032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26215.012000, 24102.128000, 1572.448045, 1572.448045, 0.000000, X, Y) && !ellipse(25914.886220, 23580.292045, 1401.832040, 1110.823735, 118.957952, X, Y) && !ellipse(25380.768373, 22632.627143, 1401.832040, 379.711042, 119.687727, X, Y) && !ellipse(24852.876000, 21765.006000, 1571.048045, 1571.048045, 0.000000, X, Y) && !ellipse(24715.139142, 21566.049689, 1401.832040, 705.968645, 302.745354, X, Y) && !ellipse(24463.386600, 21155.156000, 1331.648038, 1331.648038, 0.000000, X, Y) && !ellipse(24386.263255, 20869.804226, 1401.832040, 503.022356, 122.509333, X, Y) && !ellipse(23877.695667, 20104.434381, 1401.832040, 470.025722, 303.397639, X, Y) && !ellipse(23376.189441, 19249.069220, 1912.536055, 447.758873, 120.577993, X, Y) && !ellipse(23262.197600, 19045.398000, 1401.832040, 510.702415, 300.812000, X, Y) && !ellipse(22472.414521, 17635.955954, 2055.880059, 697.812501, 304.353098, X, Y) && !ellipse(21968.088000, 16804.741600, 1695.008049, 360.869610, 301.032600, X, Y) && !ellipse(21141.978000, 15425.908000, 1749.480050, 1749.480050, 0.000000, X, Y)
[Thu Sep  6 03:03:18 2012] Writing fullrun_pn_xmm0503690101_pi300-10000_pass1_cl_src1.gif
[Thu Sep  6 03:03:45 2012] Mean detx,y = (137.88, -96.04) 
[Thu Sep  6 03:03:52 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 03:06:33 2012] grppha failed
[Thu Sep  6 03:06:34 2012] Setting source spectrum file to fullrun_pn_xmm0503690101_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu Sep  6 03:06:34 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503690101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Sep  6 03:38:55 2012] Updating aperture counts using extracted products
[Thu Sep  6 03:38:55 2012] Error reading totcts from fullrun_pn_xmm0503690101_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu Sep  6 03:38:57 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 03:39:01 2012] Source 1 has no response, skipping
[Thu Sep  6 03:39:02 2012] xmm0503690101/analysis//spectral/fullrun_pn_xmm0503690101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete