[Thu Sep  6 00:36:40 2012] Detection parameters:
  Position = (319.6, 307.0) = 2 44 57.59 62 28 6.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3620.4 +/- 71.1
  Background counts = 9.0
  Rate = 1 +/- 0.02

[Thu Sep  6 00:36:40 2012] Off-axis axis estimate = 1.66'
[Thu Sep  6 01:55:15 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 01:55:15 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Thu Sep  6 01:55:15 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.064
[Thu Sep  6 01:55:15 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Thu Sep  6 01:56:30 2012] fullrun_mos2_xmm0503690101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Sep  6 01:56:30 2012] fullrun_mos2_xmm0503690101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Sep  6 01:56:30 2012] Fit fullrun_mos2_xmm0503690101_pi300-10000_cl_pass0_src1 appears to have run properly
[Thu Sep  6 01:56:30 2012] fullrun_mos2_xmm0503690101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep  6 01:56:30 2012] fullrun_mos2_xmm0503690101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep  6 01:56:30 2012] Fit fullrun_mos2_xmm0503690101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep  6 01:56:39 2012] Spatial fit model total counts = 2418.680000, observed total counts = 2355.000000
[Thu Sep  6 01:56:39 2012] Offset between fit and detection position for source 1 = 0.165637 pixels
[Thu Sep  6 01:56:39 2012] 2421.651000 total counts/ 595.811000 bgd. counts: snr = 74.801182
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.165637 pixels
  Position = (319.5, 307.0) = 2 44 57.69 62 28 7.0
  Extent = 6.0 (5.7-6.3)" x 5.3 (5.1-5.6)", rotation angle = 33 (15-51) degrees
  Source counts = 1825.8 +/- 49.2
  Background counts = 595.8
  Rate = 0.8 +/- 0.02
[Thu Sep  6 01:56:39 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 01:56:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 01:56:39 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 01:56:39 2012] Source does appear to be extended
[Thu Sep  6 01:56:39 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.01
[Thu Sep  6 03:01:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep  6 03:01:58 2012] Initial guess for spatial extent in simple fitting = 5.64"
[Thu Sep  6 03:01:58 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.928
[Thu Sep  6 03:01:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.64"
[Thu Sep  6 03:03:01 2012] fullrun_mos2_xmm0503690101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Sep  6 03:03:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503690101_pi300-10000_cl_pass1_src1.csv
[Thu Sep  6 03:03:01 2012] fullrun_mos2_xmm0503690101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Sep  6 03:03:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503690101_pi300-10000_cl_pass1_src1.csv
[Thu Sep  6 03:03:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503690101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503690101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 03:03:01 2012] fullrun_mos2_xmm0503690101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep  6 03:03:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503690101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Sep  6 03:03:01 2012] fullrun_mos2_xmm0503690101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep  6 03:03:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503690101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Sep  6 03:03:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503690101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503690101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 03:03:11 2012] Warning, spatial fit 1 centroid is now closest to src. 33
[Thu Sep  6 03:03:11 2012] Source 1 in spatial fitting is no longer close to this source
[Thu Sep  6 03:03:11 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 03:03:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 03:03:11 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 03:03:11 2012] Source does appear to be extended
[Thu Sep  6 03:03:11 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.01
[Thu Sep  6 03:36:33 2012] Counts = 1825.840000, rescaling region sizes by 2.000000
[Thu Sep  6 03:36:33 2012] XMMSAS src. selection expression = ellipse(27743.871400, 26661.207600, 715.178421, 639.498018, 33.059911, X, Y)
[Thu Sep  6 03:36:33 2012] Writing source region out to fullrun_mos2_xmm0503690101_pi300-10000_pass1_cl_src1_src.reg
[Thu Sep  6 03:36:33 2012] Extracting stamp from image fullrun_mos2_xmm0503690101_pi300-10000_cl_sm2.00.img.gz, (278, 266) - (361, 348)
[Thu Sep  6 03:36:33 2012] XMMSAS bgd. selection expression = annulus(27743.871400, 26661.207600, 2383.928069, 4767.856137, X, Y)
[Thu Sep  6 03:36:33 2012] Writing fullrun_mos2_xmm0503690101_pi300-10000_pass1_cl_src1.gif
[Thu Sep  6 03:36:34 2012] Mean detx,y = (2.80, -56.94) 
[Thu Sep  6 03:36:35 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 03:36:44 2012] grppha failed
[Thu Sep  6 03:36:44 2012] Setting source spectrum file to fullrun_mos2_xmm0503690101_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu Sep  6 03:36:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503690101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Sep  6 03:38:58 2012] Updating aperture counts using extracted products
[Thu Sep  6 03:38:58 2012] Error reading totcts from fullrun_mos2_xmm0503690101_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu Sep  6 03:38:58 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 03:39:00 2012] Source 1 has no response, skipping
[Thu Sep  6 03:39:01 2012] xmm0503690101/analysis//spectral/fullrun_mos2_xmm0503690101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete