[Thu Sep  6 00:36:25 2012] Detection parameters:
  Position = (349.2, 494.3) = 2 44 38.80 62 41 48.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.1 +/- 21.3
  Background counts = 143.9
  Rate = 0.001 +/- 0.0003

[Thu Sep  6 00:36:25 2012] Off-axis axis estimate = 14.67'
[Thu Sep  6 01:43:26 2012] Using EEF radius (= 13.76 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 01:43:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep  6 01:43:26 2012] Initial guess for spatial extent in simple fitting = 13.76"
[Thu Sep  6 01:43:26 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.913
[Thu Sep  6 01:43:26 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 13.76"
[Thu Sep  6 01:55:14 2012] fullrun_mos1_xmm0503690101_pi300-10000_cl_pass0_src10.ximg exists
[Thu Sep  6 01:55:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503690101_pi300-10000_cl_pass0_src10.csv
[Thu Sep  6 01:55:14 2012] fullrun_mos1_xmm0503690101_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu Sep  6 01:55:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503690101_pi300-10000_cl_pass0_src10.csv
[Thu Sep  6 01:55:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503690101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503690101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 01:55:15 2012] fullrun_mos1_xmm0503690101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu Sep  6 01:55:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503690101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu Sep  6 01:55:15 2012] fullrun_mos1_xmm0503690101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Sep  6 01:55:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503690101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu Sep  6 01:55:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503690101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503690101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 01:56:39 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 18.542224 pixels away
[Thu Sep  6 01:56:39 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 01:56:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 01:56:39 2012] Assessing source extent using major
[Thu Sep  6 01:56:39 2012] Source does appear to be extended
[Thu Sep  6 01:56:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 01:56:39 2012] Deleting source due to low Poisson probability 0.9