[Thu Sep  6 00:36:24 2012] Detection parameters:
  Position = (319.6, 307.0) = 2 44 57.62 62 28 6.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90067.5 +/- 358.3
  Background counts = 277.3
  Rate = 1 +/- 0.004

[Thu Sep  6 00:36:25 2012] Off-axis axis estimate = 1.65'
[Thu Sep  6 01:43:25 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 01:43:25 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Thu Sep  6 01:43:25 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.064
[Thu Sep  6 01:43:25 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Thu Sep  6 01:55:14 2012] fullrun_mos1_xmm0503690101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Sep  6 01:55:14 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0503690101_pi300-10000_cl_pass0_src1.csv
[Thu Sep  6 01:55:14 2012] fullrun_mos1_xmm0503690101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Sep  6 01:55:14 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0503690101_pi300-10000_cl_pass0_src1.csv
[Thu Sep  6 01:55:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503690101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503690101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 01:55:14 2012] fullrun_mos1_xmm0503690101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep  6 01:55:14 2012] fullrun_mos1_xmm0503690101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep  6 01:55:14 2012] Fit fullrun_mos1_xmm0503690101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep  6 01:56:39 2012] Spatial fit model total counts = 53315.800000, observed total counts = 53317.000000
[Thu Sep  6 01:56:39 2012] Offset between fit and detection position for source 1 = 0.130368 pixels
[Thu Sep  6 01:56:39 2012] 53388.200000 total counts/ 11550.200000 bgd. counts: snr = 389.292613
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.130368 pixels
  Position = (319.4, 307.0) = 2 44 57.70 62 28 7.0
  Extent = 5.8 (5.8-5.8)", rotation angle = 0
  Source counts = 41838.0 +/- 231.1
  Background counts = 11550.2
  Rate = 0.8 +/- 0.005
[Thu Sep  6 01:56:39 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 01:56:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 01:56:39 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 01:56:39 2012] Source does appear to be extended
[Thu Sep  6 01:56:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 02:55:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep  6 02:55:29 2012] Initial guess for spatial extent in simple fitting = 5.80"
[Thu Sep  6 02:55:29 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.892
[Thu Sep  6 02:55:29 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.80"
[Thu Sep  6 03:01:58 2012] fullrun_mos1_xmm0503690101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Sep  6 03:01:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503690101_pi300-10000_cl_pass1_src1.csv
[Thu Sep  6 03:01:58 2012] fullrun_mos1_xmm0503690101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Sep  6 03:01:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503690101_pi300-10000_cl_pass1_src1.csv
[Thu Sep  6 03:01:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503690101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503690101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 03:01:58 2012] fullrun_mos1_xmm0503690101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep  6 03:01:58 2012] fullrun_mos1_xmm0503690101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep  6 03:01:58 2012] Fit fullrun_mos1_xmm0503690101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep  6 03:03:11 2012] Spatial fit model total counts = 53315.800000, observed total counts = 53317.000000
[Thu Sep  6 03:03:11 2012] Offset between fit and detection position for source 1 = 0.000017 pixels
[Thu Sep  6 03:03:11 2012] 53388.300000 total counts/ 11554.500000 bgd. counts: snr = 389.181096
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000017 pixels
  Position = (319.4, 307.0) = 2 44 57.70 62 28 7.0
  Extent = 5.8 (5.8-5.8)", rotation angle = 0
  Source counts = 41833.8 +/- 231.1
  Background counts = 11554.5
  Rate = 0.8 +/- 0.005
[Thu Sep  6 03:03:11 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 03:03:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 03:03:11 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 03:03:11 2012] Source does appear to be extended
[Thu Sep  6 03:03:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 03:31:46 2012] Counts = 41833.800000, rescaling region sizes by 3.000000
[Thu Sep  6 03:31:46 2012] XMMSAS src. selection expression = ellipse(27742.908200, 26660.762600, 1043.793030, 1043.793030, 0.000000, X, Y)
[Thu Sep  6 03:31:46 2012] Writing source region out to fullrun_mos1_xmm0503690101_pi300-10000_pass1_cl_src1_src.reg
[Thu Sep  6 03:31:46 2012] Extracting stamp from image fullrun_mos1_xmm0503690101_pi300-10000_cl_sm2.00.img.gz, (259, 247) - (379, 367)
[Thu Sep  6 03:31:46 2012] XMMSAS bgd. selection expression = annulus(27742.908200, 26660.762600, 5218.965150, 10437.930300, X, Y) && !ellipse(28878.357483, 27854.410919, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(38651.140656, 31521.548004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17517.273392, 31437.011871, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 03:31:46 2012] Writing fullrun_mos1_xmm0503690101_pi300-10000_pass1_cl_src1.gif
[Thu Sep  6 03:31:54 2012] Mean detx,y = (165.94, -173.39) 
[Thu Sep  6 03:31:56 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 03:34:48 2012] grppha failed
[Thu Sep  6 03:34:48 2012] Setting source spectrum file to fullrun_mos1_xmm0503690101_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu Sep  6 03:34:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503690101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Sep  6 03:38:58 2012] Updating aperture counts using extracted products
[Thu Sep  6 03:38:58 2012] Error reading totcts from fullrun_mos1_xmm0503690101_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu Sep  6 03:38:58 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 03:38:59 2012] Source 1 has no response, skipping
[Thu Sep  6 03:39:00 2012] xmm0503690101/analysis//spectral/fullrun_mos1_xmm0503690101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete