[Sat Nov 26 17:09:11 2011] Detection parameters:
  Position = (145.5, 273.1) = 7 35 8.86 26 51 29.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 320.5 +/- 28.2
  Background counts = 164.6
  Rate = 0.01 +/- 0.001

[Sat Nov 26 17:09:11 2011] Off-axis axis estimate = 11.24'
[Sat Nov 26 17:14:59 2011] Using EEF radius (= 12.05 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 17:14:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Nov 26 17:14:59 2011] Initial guess for spatial extent in simple fitting = 12.05"
[Sat Nov 26 17:14:59 2011] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.982
[Sat Nov 26 17:14:59 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 12.05"
[Sat Nov 26 17:26:28 2011] fullrun_pn_xmm0503630101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Nov 26 17:26:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503630101_pi300-10000_cl_pass0_src1.csv
[Sat Nov 26 17:26:28 2011] fullrun_pn_xmm0503630101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Nov 26 17:26:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503630101_pi300-10000_cl_pass0_src1.csv
[Sat Nov 26 17:26:28 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503630101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503630101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 17:26:28 2011] fullrun_pn_xmm0503630101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Nov 26 17:26:28 2011] fullrun_pn_xmm0503630101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Nov 26 17:26:28 2011] Fit fullrun_pn_xmm0503630101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Nov 26 17:54:26 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.415424 pixels away
[Sat Nov 26 17:54:26 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 17:54:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 17:54:26 2011] Assessing source extent using major
[Sat Nov 26 17:54:26 2011] Source does appear to be extended
[Sat Nov 26 17:54:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 17:54:38 2011] Using EEF radius (= 12.05 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 17:54:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Nov 26 17:54:38 2011] Initial guess for spatial extent in simple fitting = 12.05"
[Sat Nov 26 17:54:38 2011] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.982
[Sat Nov 26 17:54:38 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 12.05"
[Sat Nov 26 18:14:57 2011] fullrun_pn_xmm0503630101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Nov 26 18:14:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503630101_pi300-10000_cl_pass1_src1.csv
[Sat Nov 26 18:14:57 2011] fullrun_pn_xmm0503630101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Nov 26 18:14:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503630101_pi300-10000_cl_pass1_src1.csv
[Sat Nov 26 18:14:57 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503630101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503630101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 18:14:57 2011] fullrun_pn_xmm0503630101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Nov 26 18:14:57 2011] fullrun_pn_xmm0503630101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Nov 26 18:14:57 2011] Fit fullrun_pn_xmm0503630101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Nov 26 18:44:41 2011] Spatial fit model total counts = 1524.580000, observed total counts = 1526.000000
[Sat Nov 26 18:44:41 2011] Offset between fit and detection position for source 1 = 2.290060 pixels
[Sat Nov 26 18:44:41 2011] 1514.373000 total counts/ 1290.640000 bgd. counts: snr = 6.227697
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.290060 pixels
  Position = (147.3, 274.5) = 7 35 8.28 26 51 35.3
  Extent = 11.7 (9.5-14.5)", rotation angle = 0
  Source counts = 223.7 +/- 38.9
  Background counts = 1290.6
  Rate = 0.03 +/- 0.005
[Sat Nov 26 18:44:41 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 18:44:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 18:44:41 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 18:44:41 2011] Source does appear to be extended
[Sat Nov 26 18:44:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 18:44:53 2011] XMMSAS src. selection expression = ellipse(12767.160000, 23833.681600, 699.450020, 699.450020, 0.000000, X, Y)
[Sat Nov 26 18:44:53 2011] Writing source region out to fullrun_pn_xmm0503630101_pi300-10000_pass1_cl_src1_src.reg
[Sat Nov 26 18:44:53 2011] Extracting stamp from image fullrun_pn_xmm0503630101_pi300-10000_cl_sm2.00.img.gz, (107, 234) - (188, 315)
[Sat Nov 26 18:44:53 2011] XMMSAS bgd. selection expression = annulus(12767.160000, 23833.681600, 1165.750034, 2331.500067, X, Y)
[Sat Nov 26 18:44:53 2011] Writing fullrun_pn_xmm0503630101_pi300-10000_pass1_cl_src1.gif
[Sat Nov 26 18:45:08 2011] Mean detx,y = (12241.08, 1890.68) 
[Sat Nov 26 18:45:13 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Nov 26 18:45:37 2011] Binned source spectrum to 10 counts/bin
[Sat Nov 26 18:45:38 2011] Setting source spectrum file to fullrun_pn_xmm0503630101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Nov 26 18:45:38 2011] Setting bgd. spectrum file to fullrun_pn_xmm0503630101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Nov 26 19:22:30 2011] Updating aperture counts using extracted products
[Sat Nov 26 19:22:30 2011] Error reading totcts from fullrun_pn_xmm0503630101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Nov 26 19:22:30 2011] Calculating source flux in energy range 0.30-8.00
[Sat Nov 26 19:22:30 2011] Using photon index=1.80, rate=0.0315, arf fullrun_pn_xmm0503630101_pi300-10000_pass1_cl_src1.arf
[Sat Nov 26 19:22:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Nov 26 19:22:30 2011] Updating source flux to 1.5e-13
[Sat Nov 26 19:24:25 2011] Reading fit data from xmm0503630101/analysis//spectral/fullrun_pn_xmm0503630101_pi300-10000_pass1_cl_src1_pl.csv
[Sat Nov 26 19:24:25 2011] Spectral fit parameter nH value = 3.37345e+21
[Sat Nov 26 19:24:25 2011] Spectral fit parameter PhoIndex value = 3.30054
[Sat Nov 26 19:24:25 2011] Failed to get F(0.3-8.0) from xmm0503630101/analysis//spectral/fullrun_pn_xmm0503630101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Nov 26 19:24:25 2011] Calculating source flux in energy range 0.30-8.00
[Sat Nov 26 19:24:25 2011] Using Nh = 3.4e+21, photon index=3.30, rate=0.0315, arf fullrun_pn_xmm0503630101_pi300-10000_pass1_cl_src1.arf
[Sat Nov 26 19:24:25 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Nov 26 19:24:25 2011] Updating source flux to 1.3e-13