[Sat Nov 26 17:09:42 2011] Detection parameters:
  Position = (218.8, 159.8) = 7 34 45.01 26 43 16.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.1 +/- 17.2
  Background counts = 76.9
  Rate = 0.008 +/- 0.001

[Sat Nov 26 17:09:43 2011] Off-axis axis estimate = 11.59'
[Sat Nov 26 17:26:28 2011] Using EEF radius (= 12.22 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 17:26:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Nov 26 17:26:28 2011] Initial guess for spatial extent in simple fitting = 12.22"
[Sat Nov 26 17:26:28 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.958
[Sat Nov 26 17:26:28 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 12.22"
[Sat Nov 26 17:41:29 2011] fullrun_mos1_xmm0503630101_pi300-10000_cl_pass0_src3.ximg exists
[Sat Nov 26 17:41:29 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0503630101_pi300-10000_cl_pass0_src3.csv
[Sat Nov 26 17:41:29 2011] fullrun_mos1_xmm0503630101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Nov 26 17:41:29 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0503630101_pi300-10000_cl_pass0_src3.csv
[Sat Nov 26 17:41:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503630101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503630101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 17:41:29 2011] fullrun_mos1_xmm0503630101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Nov 26 17:41:29 2011] fullrun_mos1_xmm0503630101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Nov 26 17:41:29 2011] Fit fullrun_mos1_xmm0503630101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Nov 26 17:54:29 2011] Spatial fit model total counts = 512.099000, observed total counts = 512.000000
[Sat Nov 26 17:54:29 2011] Offset between fit and detection position for source 6 = 0.559257 pixels
[Sat Nov 26 17:54:29 2011] 513.218300 total counts/ 475.181000 bgd. counts: snr = 1.744939
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.559257 pixels
  Position = (219.2, 159.5) = 7 34 44.87 26 43 15.5
  Extent = 4.4 (3.1-6.7)", rotation angle = 0
  Source counts = 38.0 +/- 22.7
  Background counts = 475.2
  Rate = 0.002 +/- 0.001
[Sat Nov 26 17:54:29 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 17:54:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 17:54:29 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 17:54:29 2011] Source does appear to be extended
[Sat Nov 26 17:54:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 18:14:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Nov 26 18:14:58 2011] Initial guess for spatial extent in simple fitting = 4.35"
[Sat Nov 26 18:14:58 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.999
[Sat Nov 26 18:14:58 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 4.35"
[Sat Nov 26 18:30:17 2011] fullrun_mos1_xmm0503630101_pi300-10000_cl_pass1_src3.ximg exists
[Sat Nov 26 18:30:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503630101_pi300-10000_cl_pass1_src3.csv
[Sat Nov 26 18:30:17 2011] fullrun_mos1_xmm0503630101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Nov 26 18:30:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503630101_pi300-10000_cl_pass1_src3.csv
[Sat Nov 26 18:30:17 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503630101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503630101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 18:30:17 2011] fullrun_mos1_xmm0503630101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Nov 26 18:30:17 2011] fullrun_mos1_xmm0503630101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Nov 26 18:30:17 2011] Fit fullrun_mos1_xmm0503630101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Nov 26 18:44:43 2011] Warning, spatial fit 3 centroid is now closest to src. 7
[Sat Nov 26 18:44:43 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 18:44:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 18:44:43 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 18:44:43 2011] Source does appear to be extended
[Sat Nov 26 18:44:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 19:07:13 2011] XMMSAS src. selection expression = ellipse(19024.374800, 13829.381400, 261.280808, 261.280808, 0.000000, X, Y)
[Sat Nov 26 19:07:13 2011] Writing source region out to fullrun_mos1_xmm0503630101_pi300-10000_pass1_cl_src6_src.reg
[Sat Nov 26 19:07:13 2011] Extracting stamp from image fullrun_mos1_xmm0503630101_pi300-10000_cl_sm2.00.img.gz, (204, 144) - (234, 175)
[Sat Nov 26 19:07:13 2011] XMMSAS bgd. selection expression = annulus(19024.374800, 13829.381400, 435.468013, 870.936025, X, Y)
[Sat Nov 26 19:07:13 2011] Writing fullrun_mos1_xmm0503630101_pi300-10000_pass1_cl_src6.gif
[Sat Nov 26 19:08:00 2011] Mean detx,y = (9205.10, 7635.31) 
[Sat Nov 26 19:08:02 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Nov 26 19:08:14 2011] Binned source spectrum to 10 counts/bin
[Sat Nov 26 19:08:15 2011] Setting source spectrum file to fullrun_mos1_xmm0503630101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Nov 26 19:08:15 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0503630101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Nov 26 19:14:24 2011] Not generating rmf since there are only 38 counts
[Sat Nov 26 19:14:24 2011] rmf not generated due to insufficient counts
[Sat Nov 26 19:22:30 2011] Updating aperture counts using extracted products
[Sat Nov 26 19:22:31 2011] Error reading totcts from fullrun_mos1_xmm0503630101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Nov 26 19:22:31 2011] Calculating source flux in energy range 0.30-8.00
[Sat Nov 26 19:22:31 2011] Using photon index=1.80, rate=0.00215, arf fullrun_mos1_xmm0503630101_pi300-10000_pass1_cl_src6.arf
[Sat Nov 26 19:22:31 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Nov 26 19:22:31 2011] Updating source flux to 4.8e-14
[Sat Nov 26 19:22:33 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting