[Wed Oct  5 10:48:30 2011] Detection parameters:
  Position = (361.4, 147.1) = 12 49 38.48 5 9 24.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4305.3 +/- 80.2
  Background counts = 90.3
  Rate = 0.06 +/- 0.001

[Wed Oct  5 10:48:33 2011] Off-axis axis estimate = 11.88'
[Wed Oct  5 10:54:26 2011] Using EEF radius (= 12.37 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 10:54:26 2011] Initial guess for spatial extent in simple fitting = 12.37"
[Wed Oct  5 10:54:26 2011] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.939
[Wed Oct  5 10:54:26 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 12.37"
[Wed Oct  5 12:33:57 2011] fullrun_pn_xmm0503610101_pi300-10000_cl_pass0_src2.ximg exists
[Wed Oct  5 12:33:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503610101_pi300-10000_cl_pass0_src2.csv
[Wed Oct  5 12:33:57 2011] fullrun_pn_xmm0503610101_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Oct  5 12:33:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503610101_pi300-10000_cl_pass0_src2.csv
[Wed Oct  5 12:33:57 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503610101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503610101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 12:33:58 2011] fullrun_pn_xmm0503610101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Oct  5 12:33:58 2011] fullrun_pn_xmm0503610101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Oct  5 12:33:58 2011] Fit fullrun_pn_xmm0503610101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Oct  5 13:57:49 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.749734 pixels away
[Wed Oct  5 13:57:49 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 13:57:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 13:57:49 2011] Assessing source extent using major
[Wed Oct  5 13:57:49 2011] Source does appear to be extended
[Wed Oct  5 13:57:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 13:58:14 2011] Using EEF radius (= 12.37 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 13:58:14 2011] Initial guess for spatial extent in simple fitting = 12.37"
[Wed Oct  5 13:58:14 2011] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.939
[Wed Oct  5 13:58:14 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 12.37"
[Wed Oct  5 15:15:38 2011] fullrun_pn_xmm0503610101_pi300-10000_cl_pass1_src2.ximg exists
[Wed Oct  5 15:15:38 2011] fullrun_pn_xmm0503610101_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Oct  5 15:15:38 2011] Fit fullrun_pn_xmm0503610101_pi300-10000_cl_pass1_src2 appears to have run properly
[Wed Oct  5 15:15:39 2011] fullrun_pn_xmm0503610101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Oct  5 15:15:39 2011] fullrun_pn_xmm0503610101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Oct  5 15:15:39 2011] Fit fullrun_pn_xmm0503610101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Oct  5 16:36:42 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.749734 pixels away
[Wed Oct  5 16:36:42 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 16:36:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 16:36:42 2011] Assessing source extent using major
[Wed Oct  5 16:36:42 2011] Source does appear to be extended
[Wed Oct  5 16:36:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 16:37:05 2011] Counts = 4305.299316, rescaling region sizes by 2.000000
[Wed Oct  5 16:37:05 2011] XMMSAS src. selection expression = ellipse(31390.278046, 12752.815353, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Oct  5 16:37:05 2011] Writing source region out to fullrun_pn_xmm0503610101_pi300-10000_pass1_cl_src4_src.reg
[Wed Oct  5 16:37:05 2011] Extracting stamp from image fullrun_pn_xmm0503610101_pi300-10000_cl_sm2.00.img.gz, (286, 72) - (436, 222)
[Wed Oct  5 16:37:05 2011] XMMSAS bgd. selection expression = annulus(31390.278046, 12752.815353, 4350.000000, 8700.000000, X, Y) && !ellipse(26434.680000, 21290.373200, 359.134410, 359.134410, 0.000000, X, Y) && !ellipse(39567.510742, 15776.662735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36294.932251, 20143.988129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21832.983688, 11341.997833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24607.040000, 9914.232000, 2137.800062, 2137.800062, 0.000000, X, Y) && !ellipse(38083.519287, 21927.319534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26141.132060, 9801.292600, 370.680011, 370.680011, 0.000000, X, Y) && !ellipse(26079.130890, 21070.025177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22862.948200, 20444.818400, 440.464013, 440.464013, 0.000000, X, Y) && !ellipse(28284.449000, 9730.393400, 471.009614, 471.009614, 0.000000, X, Y) && !ellipse(22289.782806, 19554.703049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23257.905200, 18800.574400, 468.054413, 468.054413, 0.000000, X, Y) && !ellipse(33869.950623, 17982.710648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38313.436859, 17014.333847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35101.850000, 16375.273800, 1470.520042, 1470.520042, 0.000000, X, Y) && !ellipse(35034.499573, 16134.204910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23869.263000, 15890.110000, 464.213613, 464.213613, 0.000000, X, Y) && !ellipse(27866.672380, 13353.420000, 691.674420, 691.674420, 0.000000, X, Y) && !ellipse(24057.405731, 11959.582870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35866.594000, 11003.424000, 2187.520063, 975.848028, 148.951000, X, Y) && !ellipse(31740.410337, 11167.616709, 610.116102, 275.863171, 336.708714, X, Y) && !ellipse(23619.533200, 8698.509800, 416.620012, 416.620012, 0.000000, X, Y)
[Wed Oct  5 16:37:05 2011] Writing fullrun_pn_xmm0503610101_pi300-10000_pass1_cl_src4.gif
[Wed Oct  5 16:40:19 2011] Mean detx,y = (-517.83, -12751.48) 
[Wed Oct  5 16:40:24 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 16:42:23 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 16:42:23 2011] Setting source spectrum file to fullrun_pn_xmm0503610101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Oct  5 16:42:23 2011] Setting bgd. spectrum file to fullrun_pn_xmm0503610101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Oct  5 17:38:33 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Oct  5 17:38:33 2011] rmf not generated due to insufficient counts
[Wed Oct  5 20:28:46 2011] Updating aperture counts using extracted products
[Wed Oct  5 20:28:46 2011] Error reading totcts from fullrun_pn_xmm0503610101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Oct  5 20:28:50 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 20:28:50 2011] Using photon index=1.80, rate=0.0622, arf fullrun_pn_xmm0503610101_pi300-10000_pass1_cl_src4.arf
[Wed Oct  5 20:28:50 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 20:28:50 2011] Updating source flux to 3.4e-13
[Wed Oct  5 20:34:27 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting