[Wed Oct 5 10:48:30 2011] Detection parameters: Position = (455.4, 181.9) = 12 49 11.10 5 11 54.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 810.3 +/- 37.8 Background counts = 86.4 Rate = 0.01 +/- 0.0005 [Wed Oct 5 10:48:33 2011] Off-axis axis estimate = 14.17' [Wed Oct 5 10:54:26 2011] Using EEF radius (= 13.51 ")to estimate initial spatial extent for simple fitting [Wed Oct 5 10:54:26 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Oct 5 10:54:26 2011] Initial guess for spatial extent in simple fitting = 13.51" [Wed Oct 5 10:54:26 2011] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.076 [Wed Oct 5 10:54:26 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 13.51" [Wed Oct 5 12:33:57 2011] fullrun_pn_xmm0503610101_pi300-10000_cl_pass0_src1.ximg exists [Wed Oct 5 12:33:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503610101_pi300-10000_cl_pass0_src1.csv [Wed Oct 5 12:33:57 2011] fullrun_pn_xmm0503610101_pi300-10000_cl_pass0_src1_1.ximg exists [Wed Oct 5 12:33:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503610101_pi300-10000_cl_pass0_src1.csv [Wed Oct 5 12:33:57 2011] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0503610101_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0503610101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Oct 5 12:33:58 2011] fullrun_pn_xmm0503610101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Wed Oct 5 12:33:58 2011] fullrun_pn_xmm0503610101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Wed Oct 5 12:33:58 2011] Fit fullrun_pn_xmm0503610101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Wed Oct 5 13:57:49 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.543997 pixels away [Wed Oct 5 13:57:49 2011] Source 3 is offset by 4.426537 and -3.190267 pixels which is larger than 2 X fitted extent = 1.472382 x 1.472382, not incorporating fit results [Wed Oct 5 13:57:49 2011] Vigneting correction estimate = 1.000000 [Wed Oct 5 13:57:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Oct 5 13:57:49 2011] Assessing source extent using major [Wed Oct 5 13:57:49 2011] Source does appear to be extended [Wed Oct 5 13:57:49 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Oct 5 13:58:14 2011] Using EEF radius (= 13.51 ")to estimate initial spatial extent for simple fitting [Wed Oct 5 13:58:14 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Oct 5 13:58:14 2011] Initial guess for spatial extent in simple fitting = 13.51" [Wed Oct 5 13:58:14 2011] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.076 [Wed Oct 5 13:58:14 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 13.51" [Wed Oct 5 15:15:38 2011] fullrun_pn_xmm0503610101_pi300-10000_cl_pass1_src1.ximg exists [Wed Oct 5 15:15:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503610101_pi300-10000_cl_pass1_src1.csv [Wed Oct 5 15:15:38 2011] fullrun_pn_xmm0503610101_pi300-10000_cl_pass1_src1_1.ximg exists [Wed Oct 5 15:15:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503610101_pi300-10000_cl_pass1_src1.csv [Wed Oct 5 15:15:38 2011] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0503610101_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0503610101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Oct 5 15:15:39 2011] fullrun_pn_xmm0503610101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Wed Oct 5 15:15:39 2011] fullrun_pn_xmm0503610101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Wed Oct 5 15:15:39 2011] Fit fullrun_pn_xmm0503610101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Wed Oct 5 16:36:42 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 17.424302 pixels away [Wed Oct 5 16:36:42 2011] Warning: source 54 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 43.944124 pixels away [Wed Oct 5 16:36:42 2011] Vigneting correction estimate = 1.000000 [Wed Oct 5 16:36:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Oct 5 16:36:42 2011] Assessing source extent using major [Wed Oct 5 16:36:42 2011] Source does appear to be extended [Wed Oct 5 16:36:42 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Oct 5 16:37:05 2011] XMMSAS src. selection expression = ellipse(39567.510742, 15776.662735, 652.500000, 652.500000, 0.000000, X, Y) [Wed Oct 5 16:37:05 2011] Writing source region out to fullrun_pn_xmm0503610101_pi300-10000_pass1_cl_src3_src.reg [Wed Oct 5 16:37:05 2011] Extracting stamp from image fullrun_pn_xmm0503610101_pi300-10000_cl_sm2.00.img.gz, (418, 144) - (493, 219) [Wed Oct 5 16:37:05 2011] XMMSAS bgd. selection expression = annulus(39567.510742, 15776.662735, 1087.500000, 2175.000000, X, Y) && !ellipse(38313.436859, 17014.333847, 870.000000, 870.000000, 0.000000, X, Y) [Wed Oct 5 16:37:05 2011] Writing fullrun_pn_xmm0503610101_pi300-10000_pass1_cl_src3.gif [Wed Oct 5 16:39:13 2011] Mean detx,y = (-9186.81, -13462.28) [Wed Oct 5 16:39:17 2011] Setting backscal keywords in source and bgd. spectrum [Wed Oct 5 16:39:46 2011] Binned source spectrum to 10 counts/bin [Wed Oct 5 16:39:46 2011] Setting source spectrum file to fullrun_pn_xmm0503610101_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Wed Oct 5 16:39:46 2011] Setting bgd. spectrum file to fullrun_pn_xmm0503610101_pi300-10000_pass1_cl_src3_bgd.pi.gz [Wed Oct 5 17:38:30 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed Oct 5 17:38:30 2011] rmf not generated due to insufficient counts [Wed Oct 5 20:28:46 2011] Updating aperture counts using extracted products [Wed Oct 5 20:28:46 2011] Error reading totcts from fullrun_pn_xmm0503610101_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Wed Oct 5 20:28:50 2011] Calculating source flux in energy range 0.30-8.00 [Wed Oct 5 20:28:50 2011] Using photon index=1.80, rate=0.0117, arf fullrun_pn_xmm0503610101_pi300-10000_pass1_cl_src3.arf [Wed Oct 5 20:28:50 2011] Assuming count rate is from the 0.30-10.00 bandpass [Wed Oct 5 20:28:50 2011] Updating source flux to 9.1e-14 [Wed Oct 5 20:34:27 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting