[Wed Oct  5 10:49:41 2011] Detection parameters:
  Position = (361.6, 147.3) = 12 49 38.42 5 9 24.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1154.5 +/- 41.9
  Background counts = 44.1
  Rate = 0.02 +/- 0.0006

[Wed Oct  5 10:49:43 2011] Off-axis axis estimate = 11.88'
[Wed Oct  5 13:13:59 2011] Using EEF radius (= 12.37 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 13:13:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 13:13:59 2011] Initial guess for spatial extent in simple fitting = 12.37"
[Wed Oct  5 13:13:59 2011] source mask rpix=2.8, npix_max = 44, mask sum = 44, frac = 0.984
[Wed Oct  5 13:13:59 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 12.37"
[Wed Oct  5 13:57:36 2011] fullrun_mos2_xmm0503610101_pi300-10000_cl_pass0_src2.ximg exists
[Wed Oct  5 13:57:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503610101_pi300-10000_cl_pass0_src2.csv
[Wed Oct  5 13:57:36 2011] fullrun_mos2_xmm0503610101_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Oct  5 13:57:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503610101_pi300-10000_cl_pass0_src2.csv
[Wed Oct  5 13:57:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503610101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503610101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 13:57:37 2011] fullrun_mos2_xmm0503610101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Oct  5 13:57:37 2011] fullrun_mos2_xmm0503610101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Oct  5 13:57:37 2011] Fit fullrun_mos2_xmm0503610101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Oct  5 13:58:01 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.301303 pixels away
[Wed Oct  5 13:58:01 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 13:58:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 13:58:01 2011] Assessing source extent using major
[Wed Oct  5 13:58:01 2011] Source does appear to be extended
[Wed Oct  5 13:58:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 15:51:38 2011] Using EEF radius (= 12.37 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 15:51:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 15:51:38 2011] Initial guess for spatial extent in simple fitting = 12.37"
[Wed Oct  5 15:51:38 2011] source mask rpix=2.8, npix_max = 44, mask sum = 44, frac = 0.984
[Wed Oct  5 15:51:38 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 12.37"
[Wed Oct  5 16:36:32 2011] fullrun_mos2_xmm0503610101_pi300-10000_cl_pass1_src2.ximg exists
[Wed Oct  5 16:36:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503610101_pi300-10000_cl_pass1_src2.csv
[Wed Oct  5 16:36:32 2011] fullrun_mos2_xmm0503610101_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Oct  5 16:36:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503610101_pi300-10000_cl_pass1_src2.csv
[Wed Oct  5 16:36:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503610101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503610101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 16:36:32 2011] fullrun_mos2_xmm0503610101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Oct  5 16:36:32 2011] fullrun_mos2_xmm0503610101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Oct  5 16:36:32 2011] Fit fullrun_mos2_xmm0503610101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Oct  5 16:36:52 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.301303 pixels away
[Wed Oct  5 16:36:52 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 16:36:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 16:36:52 2011] Assessing source extent using major
[Wed Oct  5 16:36:52 2011] Source does appear to be extended
[Wed Oct  5 16:36:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 19:21:33 2011] Counts = 1154.484131, rescaling region sizes by 2.000000
[Wed Oct  5 19:21:33 2011] XMMSAS src. selection expression = ellipse(31408.324280, 12763.485916, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Oct  5 19:21:33 2011] Writing source region out to fullrun_mos2_xmm0503610101_pi300-10000_pass1_cl_src3_src.reg
[Wed Oct  5 19:21:33 2011] Extracting stamp from image fullrun_mos2_xmm0503610101_pi300-10000_cl_sm2.00.img.gz, (287, 72) - (437, 222)
[Wed Oct  5 19:21:33 2011] XMMSAS bgd. selection expression = annulus(31408.324280, 12763.485916, 4350.000000, 8700.000000, X, Y) && !ellipse(26303.531311, 21291.872787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22286.583496, 19561.453461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39575.377594, 15776.354752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36297.794373, 19990.551331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33866.643320, 17973.233400, 404.066412, 404.066412, 0.000000, X, Y) && !ellipse(23551.686400, 8682.277400, 614.612818, 189.368005, 6.188239, X, Y) && !ellipse(27845.952800, 13402.637000, 327.543209, 327.543209, 0.000000, X, Y) && !ellipse(26769.170000, 16433.596800, 3341.344096, 1154.016033, 346.325970, X, Y)
[Wed Oct  5 19:21:33 2011] Writing fullrun_mos2_xmm0503610101_pi300-10000_pass1_cl_src3.gif
[Wed Oct  5 19:24:14 2011] Mean detx,y = (735.56, 12603.93) 
[Wed Oct  5 19:24:16 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 19:25:53 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 19:25:53 2011] Setting source spectrum file to fullrun_mos2_xmm0503610101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Oct  5 19:25:53 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503610101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Oct  5 19:38:43 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Oct  5 19:38:43 2011] rmf not generated due to insufficient counts
[Wed Oct  5 20:28:56 2011] Updating aperture counts using extracted products
[Wed Oct  5 20:28:56 2011] Error reading totcts from fullrun_mos2_xmm0503610101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Oct  5 20:28:58 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 20:28:58 2011] Using photon index=1.80, rate=0.0163, arf fullrun_mos2_xmm0503610101_pi300-10000_pass1_cl_src3.arf
[Wed Oct  5 20:28:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 20:28:58 2011] Updating source flux to 3.3e-13
[Wed Oct  5 20:30:45 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting