[Wed Feb 15 10:11:10 2012] Detection parameters:
  Position = (290.2, 277.3) = 10 22 6.44 38 30 53.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.6 +/- 10.1
  Background counts = 14.8
  Rate = 0.004 +/- 0.0009

[Wed Feb 15 10:11:10 2012] Off-axis axis estimate = 1.65'
[Wed Feb 15 11:12:01 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 11:12:01 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Wed Feb 15 11:12:01 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Wed Feb 15 11:12:01 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.25"
[Wed Feb 15 11:45:12 2012] fullrun_mos1_xmm0503601301_pi300-10000_cl_pass0_src9.ximg exists
[Wed Feb 15 11:45:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503601301_pi300-10000_cl_pass0_src9.csv
[Wed Feb 15 11:45:12 2012] fullrun_mos1_xmm0503601301_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Feb 15 11:45:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503601301_pi300-10000_cl_pass0_src9.csv
[Wed Feb 15 11:45:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503601301_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503601301_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 11:45:12 2012] fullrun_mos1_xmm0503601301_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Feb 15 11:45:12 2012] fullrun_mos1_xmm0503601301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Feb 15 11:45:12 2012] Fit fullrun_mos1_xmm0503601301_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Feb 15 12:20:21 2012] Source 5 is offset by -6.343109 and 5.974441 pixels which is larger than
2 X fitted extent = 0.833480 x 0.833480, not incorporating fit results
[Wed Feb 15 12:20:21 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 12:20:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 12:20:21 2012] Assessing source extent using major
[Wed Feb 15 12:20:21 2012] Source does appear to be extended
[Wed Feb 15 12:20:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 12:20:21 2012] Source is confused with source 4
[Wed Feb 15 13:00:36 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 13:00:36 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Wed Feb 15 13:00:36 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Wed Feb 15 13:00:36 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 7.25"
[Wed Feb 15 13:31:26 2012] fullrun_mos1_xmm0503601301_pi300-10000_cl_pass1_src8.ximg exists
[Wed Feb 15 13:31:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503601301_pi300-10000_cl_pass1_src8.csv
[Wed Feb 15 13:31:26 2012] fullrun_mos1_xmm0503601301_pi300-10000_cl_pass1_src8_1.ximg exists
[Wed Feb 15 13:31:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503601301_pi300-10000_cl_pass1_src8.csv
[Wed Feb 15 13:31:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503601301_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503601301_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 13:31:26 2012] fullrun_mos1_xmm0503601301_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Wed Feb 15 13:31:26 2012] fullrun_mos1_xmm0503601301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Wed Feb 15 13:31:26 2012] Fit fullrun_mos1_xmm0503601301_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Wed Feb 15 14:04:53 2012] Source 5 is offset by -6.294718 and 5.974441 pixels which is larger than
2 X fitted extent = 1.783913 x 1.783913, not incorporating fit results
[Wed Feb 15 14:04:53 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 14:04:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 14:04:53 2012] Assessing source extent using major
[Wed Feb 15 14:04:53 2012] Source does appear to be extended
[Wed Feb 15 14:04:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 14:30:27 2012] XMMSAS src. selection expression = ellipse(25195.449524, 24077.180389, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Feb 15 14:30:27 2012] Writing source region out to fullrun_mos1_xmm0503601301_pi300-10000_pass1_cl_src5_src.reg
[Wed Feb 15 14:30:27 2012] Extracting stamp from image fullrun_mos1_xmm0503601301_pi300-10000_cl_sm2.00.img.gz, (253, 240) - (328, 315)
[Wed Feb 15 14:30:27 2012] XMMSAS bgd. selection expression = annulus(25195.449524, 24077.180389, 1087.500000, 2175.000000, X, Y) && !ellipse(24368.534000, 24768.316000, 607.328017, 607.328017, 0.000000, X, Y) && !ellipse(24306.216492, 24235.401550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24745.647736, 24313.828461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24305.231476, 25487.054047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23526.814000, 23189.410000, 1220.944035, 1220.944035, 0.000000, X, Y) && !ellipse(23424.733490, 24428.501831, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Feb 15 14:30:27 2012] Writing fullrun_mos1_xmm0503601301_pi300-10000_pass1_cl_src5.gif
[Wed Feb 15 14:31:31 2012] Mean detx,y = (-150.89, 168.31) 
[Wed Feb 15 14:31:32 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 15 14:31:40 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 15 14:31:40 2012] Setting source spectrum file to fullrun_mos1_xmm0503601301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Feb 15 14:31:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503601301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Feb 15 14:37:26 2012] Not generating rmf since there are only 42 counts
[Wed Feb 15 14:37:26 2012] rmf not generated due to insufficient counts
[Wed Feb 15 14:46:36 2012] Updating aperture counts using extracted products
[Wed Feb 15 14:46:36 2012] Error reading totcts from fullrun_mos1_xmm0503601301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Feb 15 14:46:36 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 15 14:46:36 2012] Using photon index=1.80, rate=0.00377, arf fullrun_mos1_xmm0503601301_pi300-10000_pass1_cl_src5.arf
[Wed Feb 15 14:46:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 15 14:46:36 2012] Updating source flux to 3.8e-14
[Wed Feb 15 14:46:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting