[Sun Feb 26 05:16:49 2012] Detection parameters:
  Position = (282.9, 298.7) = 1 10 4.27 13 59 46.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.0 +/- 17.1
  Background counts = 61.7
  Rate = 0.007 +/- 0.001

[Sun Feb 26 05:16:50 2012] Off-axis axis estimate = 1.13'
[Sun Feb 26 05:20:19 2012] Using EEF radius (= 6.99 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 05:20:19 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Sun Feb 26 05:20:19 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.901
[Sun Feb 26 05:20:19 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 6.99"
[Sun Feb 26 06:52:46 2012] fullrun_pn_xmm0503600701_pi300-10000_cl_pass0_src10.ximg exists
[Sun Feb 26 06:52:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503600701_pi300-10000_cl_pass0_src10.csv
[Sun Feb 26 06:52:46 2012] fullrun_pn_xmm0503600701_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Feb 26 06:52:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503600701_pi300-10000_cl_pass0_src10.csv
[Sun Feb 26 06:52:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503600701_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503600701_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 06:52:47 2012] fullrun_pn_xmm0503600701_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Feb 26 06:52:47 2012] fullrun_pn_xmm0503600701_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Feb 26 06:52:47 2012] Fit fullrun_pn_xmm0503600701_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sun Feb 26 09:16:24 2012] Source 11 is offset by -1.383017 and -7.760612 pixels which is larger than
2 X fitted extent = 1.090929 x 1.090929, not incorporating fit results
[Sun Feb 26 09:16:24 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 09:16:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 09:16:24 2012] Assessing source extent using major
[Sun Feb 26 09:16:24 2012] Source does appear to be extended
[Sun Feb 26 09:16:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 09:16:24 2012] Source is confused with source 13
[Sun Feb 26 09:16:52 2012] Using EEF radius (= 6.99 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 09:16:52 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Sun Feb 26 09:16:52 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.901
[Sun Feb 26 09:16:52 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 6.99"
[Sun Feb 26 11:01:04 2012] fullrun_pn_xmm0503600701_pi300-10000_cl_pass1_src10.ximg exists
[Sun Feb 26 11:01:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503600701_pi300-10000_cl_pass1_src10.csv
[Sun Feb 26 11:01:04 2012] fullrun_pn_xmm0503600701_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun Feb 26 11:01:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503600701_pi300-10000_cl_pass1_src10.csv
[Sun Feb 26 11:01:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503600701_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503600701_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 11:01:05 2012] fullrun_pn_xmm0503600701_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun Feb 26 11:01:05 2012] fullrun_pn_xmm0503600701_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Feb 26 11:01:05 2012] Fit fullrun_pn_xmm0503600701_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sun Feb 26 13:06:31 2012] Warning, spatial fit 10 centroid is now closest to src. 16
[Sun Feb 26 13:06:31 2012] Spatial fit model total counts = 1168.020000, observed total counts = 1163.000000
[Sun Feb 26 13:06:31 2012] Offset between fit and detection position for source 11 = 4.907738 pixels
[Sun Feb 26 13:06:31 2012] Warning, changing simple spatial fit ID from 10 to 12
[Sun Feb 26 13:06:31 2012] 1108.196800 total counts/ 1012.450000 bgd. counts: snr = 3.009106
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 4.907738 pixels
  Position = (278.9, 301.5) = 1 10 5.47 13 59 59.2
  Extent = 14.2 (14.1-28.4)", rotation angle = 0
  Source counts = 95.7 +/- 33.3
  Background counts = 1012.5
  Rate = 0.007 +/- 0.002
[Sun Feb 26 13:06:31 2012] Source 11 is offset by -4.162906 and 2.186851 pixels which is larger than
2 X fitted extent = 3.525586 x 3.525586, not incorporating fit results
[Sun Feb 26 13:06:31 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 13:06:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 13:06:31 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 13:06:31 2012] Source does appear to be extended
[Sun Feb 26 13:06:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 13:06:57 2012] XMMSAS src. selection expression = ellipse(24215.035200, 26182.420000, 851.346024, 851.346024, 0.000000, X, Y)
[Sun Feb 26 13:06:57 2012] Writing source region out to fullrun_pn_xmm0503600701_pi300-10000_pass1_cl_src11_src.reg
[Sun Feb 26 13:06:57 2012] Extracting stamp from image fullrun_pn_xmm0503600701_pi300-10000_cl_sm2.00.img.gz, (230, 253) - (328, 350)
[Sun Feb 26 13:06:57 2012] XMMSAS bgd. selection expression = annulus(24215.035200, 26182.420000, 1418.910041, 2837.820082, X, Y) && !ellipse(24364.688202, 25528.682251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24020.022919, 25507.500427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25527.413147, 25257.417908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23104.548000, 24910.940600, 1022.064029, 1022.064029, 0.000000, X, Y) && !ellipse(24943.651000, 24592.500200, 556.199216, 556.199216, 0.000000, X, Y) && !ellipse(25854.836670, 23980.287750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25030.408000, 24815.748000, 594.397617, 594.397617, 0.000000, X, Y) && !ellipse(25443.814240, 22974.212189, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 26 13:06:57 2012] Writing fullrun_pn_xmm0503600701_pi300-10000_pass1_cl_src11.gif
[Sun Feb 26 13:17:09 2012] Mean detx,y = (548.51, 1016.22) 
[Sun Feb 26 13:17:14 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 26 13:17:54 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 26 13:17:55 2012] Setting source spectrum file to fullrun_pn_xmm0503600701_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Feb 26 13:17:55 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503600701_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Feb 26 13:46:15 2012] Not generating rmf since there are only 95 counts
[Sun Feb 26 13:46:15 2012] rmf not generated due to insufficient counts
[Sun Feb 26 15:35:16 2012] Updating aperture counts using extracted products
[Sun Feb 26 15:35:16 2012] Error reading totcts from fullrun_pn_xmm0503600701_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Feb 26 15:35:18 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 15:35:18 2012] Using photon index=1.80, rate=0.00686, arf fullrun_pn_xmm0503600701_pi300-10000_pass1_cl_src11.arf
[Sun Feb 26 15:35:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 15:35:18 2012] Updating source flux to 1.6e-14
[Sun Feb 26 15:36:50 2012] Flag b found in src. 11 procflags, skipping spectral fitting
[Sun Feb 26 15:36:50 2012] Flag c found in src. 11 procflags, skipping spectral fitting
[Sun Feb 26 15:36:50 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting