[Sun Feb 26 05:17:57 2012] Detection parameters:
  Position = (153.0, 373.3) = 1 10 43.11 14 5 12.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.3 +/- 9.7
  Background counts = 7.6
  Rate = 0.003 +/- 0.0006

[Sun Feb 26 05:17:57 2012] Off-axis axis estimate = 11.86'
[Sun Feb 26 07:54:08 2012] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 07:54:08 2012] Initial guess for spatial extent in simple fitting = 12.36"
[Sun Feb 26 07:54:08 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.941
[Sun Feb 26 07:54:08 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 12.36"
[Sun Feb 26 09:16:12 2012] fullrun_mos2_xmm0503600701_pi300-10000_cl_pass0_src14.ximg exists
[Sun Feb 26 09:16:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600701_pi300-10000_cl_pass0_src14.csv
[Sun Feb 26 09:16:12 2012] fullrun_mos2_xmm0503600701_pi300-10000_cl_pass0_src14_1.ximg exists
[Sun Feb 26 09:16:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600701_pi300-10000_cl_pass0_src14.csv
[Sun Feb 26 09:16:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503600701_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503600701_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 09:16:12 2012] fullrun_mos2_xmm0503600701_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sun Feb 26 09:16:12 2012] fullrun_mos2_xmm0503600701_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sun Feb 26 09:16:12 2012] Fit fullrun_mos2_xmm0503600701_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Sun Feb 26 09:16:37 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 12.127066 pixels away
[Sun Feb 26 09:16:37 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 09:16:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 09:16:37 2012] Assessing source extent using major
[Sun Feb 26 09:16:37 2012] Source does appear to be extended
[Sun Feb 26 09:16:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 12:00:21 2012] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 12:00:21 2012] Initial guess for spatial extent in simple fitting = 12.36"
[Sun Feb 26 12:00:21 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.941
[Sun Feb 26 12:00:21 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 12.36"
[Sun Feb 26 13:06:19 2012] fullrun_mos2_xmm0503600701_pi300-10000_cl_pass1_src13.ximg exists
[Sun Feb 26 13:06:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600701_pi300-10000_cl_pass1_src13.csv
[Sun Feb 26 13:06:19 2012] fullrun_mos2_xmm0503600701_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun Feb 26 13:06:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600701_pi300-10000_cl_pass1_src13.csv
[Sun Feb 26 13:06:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503600701_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503600701_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 13:06:19 2012] fullrun_mos2_xmm0503600701_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun Feb 26 13:06:19 2012] fullrun_mos2_xmm0503600701_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Feb 26 13:06:19 2012] Fit fullrun_mos2_xmm0503600701_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sun Feb 26 13:06:43 2012] Spatial fit model total counts = 137.284000, observed total counts = 138.000000
[Sun Feb 26 13:06:43 2012] Offset between fit and detection position for source 6 = 0.039455 pixels
[Sun Feb 26 13:06:43 2012] 139.150500 total counts/ 113.282000 bgd. counts: snr = 2.430473
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.039455 pixels
  Position = (153.0, 373.3) = 1 10 43.12 14 5 11.5
  Extent = 3.8 (3.1-5.8)", rotation angle = 0
  Source counts = 25.9 +/- 11.8
  Background counts = 113.3
  Rate = 0.002 +/- 0.0007
[Sun Feb 26 13:06:43 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 13:06:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 13:06:43 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 13:06:43 2012] Source does appear to be extended
[Sun Feb 26 13:06:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 15:02:28 2012] XMMSAS src. selection expression = ellipse(13260.280600, 32431.599620, 229.554007, 229.554007, 0.000000, X, Y)
[Sun Feb 26 15:02:28 2012] Writing source region out to fullrun_mos2_xmm0503600701_pi300-10000_pass1_cl_src6_src.reg
[Sun Feb 26 15:02:28 2012] Extracting stamp from image fullrun_mos2_xmm0503600701_pi300-10000_cl_sm2.00.img.gz, (140, 360) - (166, 387)
[Sun Feb 26 15:02:28 2012] XMMSAS bgd. selection expression = annulus(13260.280600, 32431.599620, 382.590011, 765.180022, X, Y)
[Sun Feb 26 15:02:28 2012] Writing fullrun_mos2_xmm0503600701_pi300-10000_pass1_cl_src6.gif
[Sun Feb 26 15:07:29 2012] Mean detx,y = (-13006.51, -2632.14) 
[Sun Feb 26 15:07:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 26 15:07:45 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 26 15:07:45 2012] Setting source spectrum file to fullrun_mos2_xmm0503600701_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Feb 26 15:07:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503600701_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Feb 26 15:33:45 2012] Not generating rmf since there are only 25 counts
[Sun Feb 26 15:33:45 2012] rmf not generated due to insufficient counts
[Sun Feb 26 15:35:21 2012] Updating aperture counts using extracted products
[Sun Feb 26 15:35:21 2012] Error reading totcts from fullrun_mos2_xmm0503600701_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Feb 26 15:35:22 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 15:35:22 2012] Using photon index=1.80, rate=0.00156, arf fullrun_mos2_xmm0503600701_pi300-10000_pass1_cl_src6.arf
[Sun Feb 26 15:35:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 15:35:22 2012] Updating source flux to 5e-14
[Sun Feb 26 15:36:07 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting