[Sun Feb 26 05:17:26 2012] Detection parameters:
  Position = (289.2, 252.5) = 1 10 2.38 13 56 27.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.2 +/- 10.0
  Background counts = 13.2
  Rate = 0.003 +/- 0.0007

[Sun Feb 26 05:17:26 2012] Off-axis axis estimate = 3.40'
[Sun Feb 26 06:52:47 2012] Using EEF radius (= 8.13 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 06:52:47 2012] Initial guess for spatial extent in simple fitting = 8.13"
[Sun Feb 26 06:52:47 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.114
[Sun Feb 26 06:52:47 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 8.13"
[Sun Feb 26 07:54:08 2012] fullrun_mos1_xmm0503600701_pi300-10000_cl_pass0_src12.ximg exists
[Sun Feb 26 07:54:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503600701_pi300-10000_cl_pass0_src12.csv
[Sun Feb 26 07:54:08 2012] fullrun_mos1_xmm0503600701_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun Feb 26 07:54:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503600701_pi300-10000_cl_pass0_src12.csv
[Sun Feb 26 07:54:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503600701_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503600701_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 07:54:08 2012] fullrun_mos1_xmm0503600701_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun Feb 26 07:54:08 2012] fullrun_mos1_xmm0503600701_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Feb 26 07:54:08 2012] Fit fullrun_mos1_xmm0503600701_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sun Feb 26 09:16:29 2012] Source 15 is offset by 5.689989 and -7.225300 pixels which is larger than
2 X fitted extent = 2.082524 x 2.082524, not incorporating fit results
[Sun Feb 26 09:16:29 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 09:16:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 09:16:29 2012] Assessing source extent using major
[Sun Feb 26 09:16:29 2012] Source does appear to be extended
[Sun Feb 26 09:16:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 11:01:05 2012] Using EEF radius (= 8.13 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 11:01:05 2012] Initial guess for spatial extent in simple fitting = 8.13"
[Sun Feb 26 11:01:05 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.114
[Sun Feb 26 11:01:05 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 8.13"
[Sun Feb 26 12:00:21 2012] fullrun_mos1_xmm0503600701_pi300-10000_cl_pass1_src11.ximg exists
[Sun Feb 26 12:00:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503600701_pi300-10000_cl_pass1_src11.csv
[Sun Feb 26 12:00:21 2012] fullrun_mos1_xmm0503600701_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Feb 26 12:00:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503600701_pi300-10000_cl_pass1_src11.csv
[Sun Feb 26 12:00:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503600701_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503600701_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 12:00:21 2012] fullrun_mos1_xmm0503600701_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Feb 26 12:00:21 2012] fullrun_mos1_xmm0503600701_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Feb 26 12:00:21 2012] Fit fullrun_mos1_xmm0503600701_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sun Feb 26 13:06:37 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 10.112681 pixels away
[Sun Feb 26 13:06:37 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 13:06:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 13:06:37 2012] Assessing source extent using major
[Sun Feb 26 13:06:37 2012] Source does appear to be extended
[Sun Feb 26 13:06:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 14:37:08 2012] XMMSAS src. selection expression = ellipse(25113.271057, 21916.814911, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Feb 26 14:37:08 2012] Writing source region out to fullrun_mos1_xmm0503600701_pi300-10000_pass1_cl_src15_src.reg
[Sun Feb 26 14:37:08 2012] Extracting stamp from image fullrun_mos1_xmm0503600701_pi300-10000_cl_sm2.00.img.gz, (252, 215) - (327, 290)
[Sun Feb 26 14:37:08 2012] XMMSAS bgd. selection expression = annulus(25113.271057, 21916.814911, 1087.500000, 2175.000000, X, Y) && !ellipse(24332.328705, 24737.592377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24939.650000, 25128.670000, 1072.152031, 1072.152031, 0.000000, X, Y) && !ellipse(25830.503326, 23697.481995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24636.988007, 23476.121582, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 26 14:37:08 2012] Writing fullrun_mos1_xmm0503600701_pi300-10000_pass1_cl_src15.gif
[Sun Feb 26 14:40:30 2012] Mean detx,y = (2645.26, -2204.33) 
[Sun Feb 26 14:40:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 26 14:40:51 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 26 14:40:52 2012] Setting source spectrum file to fullrun_mos1_xmm0503600701_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun Feb 26 14:40:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503600701_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sun Feb 26 15:01:44 2012] Not generating rmf since there are only 50 counts
[Sun Feb 26 15:01:44 2012] rmf not generated due to insufficient counts
[Sun Feb 26 15:35:19 2012] Updating aperture counts using extracted products
[Sun Feb 26 15:35:19 2012] Error reading totcts from fullrun_mos1_xmm0503600701_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun Feb 26 15:35:20 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 15:35:20 2012] Using photon index=1.80, rate=0.00341, arf fullrun_mos1_xmm0503600701_pi300-10000_pass1_cl_src15.arf
[Sun Feb 26 15:35:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 15:35:20 2012] Updating source flux to 3.7e-14
[Sun Feb 26 15:35:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting