[Wed Dec 28 15:13:46 2011] Detection parameters:
  Position = (359.8, 366.7) = 12 24 52.63 32 16 59.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.8 +/- 12.4
  Background counts = 22.6
  Rate = 0.01 +/- 0.002

[Wed Dec 28 15:13:47 2011] Off-axis axis estimate = 6.66'
[Wed Dec 28 15:57:22 2011] Using EEF radius (= 9.76 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 15:57:22 2011] Initial guess for spatial extent in simple fitting = 9.76"
[Wed Dec 28 15:57:22 2011] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.997
[Wed Dec 28 15:57:22 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 9.76"
[Wed Dec 28 16:29:46 2011] fullrun_mos2_xmm0503600601_pi300-10000_cl_pass0_src3.ximg exists
[Wed Dec 28 16:29:46 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0503600601_pi300-10000_cl_pass0_src3.csv
[Wed Dec 28 16:29:46 2011] fullrun_mos2_xmm0503600601_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Dec 28 16:29:46 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0503600601_pi300-10000_cl_pass0_src3.csv
[Wed Dec 28 16:29:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503600601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503600601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 16:29:46 2011] fullrun_mos2_xmm0503600601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Dec 28 16:29:46 2011] fullrun_mos2_xmm0503600601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Dec 28 16:29:46 2011] Fit fullrun_mos2_xmm0503600601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Dec 28 16:29:55 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.074015 pixels away
[Wed Dec 28 16:29:55 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 16:29:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 16:29:55 2011] Assessing source extent using major
[Wed Dec 28 16:29:55 2011] Source does appear to be extended
[Wed Dec 28 16:29:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 17:20:02 2011] Using EEF radius (= 9.76 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 17:20:02 2011] Initial guess for spatial extent in simple fitting = 9.76"
[Wed Dec 28 17:20:02 2011] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.997
[Wed Dec 28 17:20:02 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 9.76"
[Wed Dec 28 17:50:43 2011] fullrun_mos2_xmm0503600601_pi300-10000_cl_pass1_src3.ximg exists
[Wed Dec 28 17:50:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600601_pi300-10000_cl_pass1_src3.csv
[Wed Dec 28 17:50:43 2011] fullrun_mos2_xmm0503600601_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Dec 28 17:50:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600601_pi300-10000_cl_pass1_src3.csv
[Wed Dec 28 17:50:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503600601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503600601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 17:50:43 2011] fullrun_mos2_xmm0503600601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Dec 28 17:50:43 2011] fullrun_mos2_xmm0503600601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Dec 28 17:50:43 2011] Fit fullrun_mos2_xmm0503600601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Dec 28 17:50:54 2011] Spatial fit model total counts = 95.999900, observed total counts = 96.000000
[Wed Dec 28 17:50:54 2011] Offset between fit and detection position for source 3 = 0.469314 pixels
[Wed Dec 28 17:50:54 2011] 95.518900 total counts/ 48.133100 bgd. counts: snr = 6.830088
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.469314 pixels
  Position = (359.5, 366.4) = 12 24 52.74 32 16 57.9
  Extent = 5.2 (4.0-6.8)", rotation angle = 0
  Source counts = 47.4 +/- 9.8
  Background counts = 48.1
  Rate = 0.009 +/- 0.002
[Wed Dec 28 17:50:54 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 17:50:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 17:50:54 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 17:50:54 2011] Source does appear to be extended
[Wed Dec 28 17:50:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 19:12:11 2011] XMMSAS src. selection expression = ellipse(31229.066400, 31824.472400, 313.822809, 313.822809, 0.000000, X, Y)
[Wed Dec 28 19:12:11 2011] Writing source region out to fullrun_mos2_xmm0503600601_pi300-10000_pass1_cl_src3_src.reg
[Wed Dec 28 19:12:11 2011] Extracting stamp from image fullrun_mos2_xmm0503600601_pi300-10000_cl_sm2.00.img.gz, (341, 348) - (378, 384)
[Wed Dec 28 19:12:11 2011] XMMSAS bgd. selection expression = annulus(31229.066400, 31824.472400, 523.038015, 1046.076030, X, Y)
[Wed Dec 28 19:12:11 2011] Writing fullrun_mos2_xmm0503600601_pi300-10000_pass1_cl_src3.gif
[Wed Dec 28 19:12:47 2011] Mean detx,y = (-5888.78, 1957.26) 
[Wed Dec 28 19:12:51 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 19:13:28 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 19:13:28 2011] Setting source spectrum file to fullrun_mos2_xmm0503600601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Dec 28 19:13:28 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503600601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Dec 28 19:16:06 2011] Not generating rmf since there are only 47 counts
[Wed Dec 28 19:16:06 2011] rmf not generated due to insufficient counts
[Wed Dec 28 19:17:28 2011] Updating aperture counts using extracted products
[Wed Dec 28 19:17:29 2011] Error reading totcts from fullrun_mos2_xmm0503600601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Dec 28 19:17:29 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 19:17:29 2011] Using photon index=1.80, rate=0.00912, arf fullrun_mos2_xmm0503600601_pi300-10000_pass1_cl_src3.arf
[Wed Dec 28 19:17:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 19:17:29 2011] Updating source flux to 1.5e-13
[Wed Dec 28 19:17:56 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Dec 28 19:17:57 2011] xmm0503600601/analysis//spectral/fullrun_mos2_xmm0503600601_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete