[Wed Dec 28 15:12:59 2011] Detection parameters:
  Position = (301.0, 326.0) = 12 25 12.83 32 14 3.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 704.1 +/- 33.3
  Background counts = 21.8
  Rate = 0.09 +/- 0.004

[Wed Dec 28 15:13:00 2011] Off-axis axis estimate = 2.01'
[Wed Dec 28 15:45:22 2011] Using EEF radius (= 7.43 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 15:45:22 2011] Initial guess for spatial extent in simple fitting = 7.43"
[Wed Dec 28 15:45:22 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.820
[Wed Dec 28 15:45:22 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.43"
[Wed Dec 28 15:57:22 2011] fullrun_mos1_xmm0503600601_pi300-10000_cl_pass0_src1.ximg exists
[Wed Dec 28 15:57:22 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0503600601_pi300-10000_cl_pass0_src1.csv
[Wed Dec 28 15:57:22 2011] fullrun_mos1_xmm0503600601_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Dec 28 15:57:22 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0503600601_pi300-10000_cl_pass0_src1.csv
[Wed Dec 28 15:57:22 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503600601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503600601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 15:57:22 2011] fullrun_mos1_xmm0503600601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Dec 28 15:57:22 2011] fullrun_mos1_xmm0503600601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Dec 28 15:57:22 2011] Fit fullrun_mos1_xmm0503600601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Dec 28 16:29:52 2011] Spatial fit model total counts = 1164.570000, observed total counts = 1166.000000
[Wed Dec 28 16:29:52 2011] Offset between fit and detection position for source 1 = 1.037927 pixels
[Wed Dec 28 16:29:52 2011] 1151.885000 total counts/ 393.975000 bgd. counts: snr = 38.184166
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.037927 pixels
  Position = (300.0, 325.5) = 12 25 13.14 32 14 0.4
  Extent = 12.9 (11.5-14.6)", rotation angle = 0
  Source counts = 757.9 +/- 33.9
  Background counts = 394.0
  Rate = 0.1 +/- 0.006
[Wed Dec 28 16:29:52 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 16:29:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 16:29:52 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 16:29:52 2011] Source does appear to be extended
[Wed Dec 28 16:29:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 17:04:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 28 17:04:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Dec 28 17:04:33 2011] Initial guess for spatial extent in simple fitting = 12.92"
[Wed Dec 28 17:04:33 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.017
[Wed Dec 28 17:04:33 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 12.92"
[Wed Dec 28 17:20:02 2011] fullrun_mos1_xmm0503600601_pi300-10000_cl_pass1_src1.ximg exists
[Wed Dec 28 17:20:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503600601_pi300-10000_cl_pass1_src1.csv
[Wed Dec 28 17:20:02 2011] fullrun_mos1_xmm0503600601_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Dec 28 17:20:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503600601_pi300-10000_cl_pass1_src1.csv
[Wed Dec 28 17:20:02 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503600601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503600601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 17:20:02 2011] fullrun_mos1_xmm0503600601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Dec 28 17:20:02 2011] fullrun_mos1_xmm0503600601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Dec 28 17:20:02 2011] Fit fullrun_mos1_xmm0503600601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Dec 28 17:50:50 2011] Warning, spatial fit 1 centroid is now closest to src. 2
[Wed Dec 28 17:50:50 2011] Source 1 in spatial fitting is no longer close to this source
[Wed Dec 28 17:50:50 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 17:50:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 17:50:50 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 17:50:50 2011] Source does appear to be extended
[Wed Dec 28 17:50:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 18:52:16 2011] XMMSAS src. selection expression = ellipse(26055.713200, 28271.812800, 775.116022, 775.116022, 0.000000, X, Y)
[Wed Dec 28 18:52:16 2011] Writing source region out to fullrun_mos1_xmm0503600601_pi300-10000_pass1_cl_src1_src.reg
[Wed Dec 28 18:52:16 2011] Extracting stamp from image fullrun_mos1_xmm0503600601_pi300-10000_cl_sm2.00.img.gz, (256, 281) - (345, 370)
[Wed Dec 28 18:52:16 2011] XMMSAS bgd. selection expression = annulus(26055.713200, 28271.812800, 1291.860037, 2583.720074, X, Y)
[Wed Dec 28 18:52:16 2011] Writing fullrun_mos1_xmm0503600601_pi300-10000_pass1_cl_src1.gif
[Wed Dec 28 18:52:20 2011] Mean detx,y = (730.13, -402.99) 
[Wed Dec 28 18:52:25 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 18:52:52 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 18:52:53 2011] Setting source spectrum file to fullrun_mos1_xmm0503600601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Dec 28 18:52:53 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0503600601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Dec 28 19:17:28 2011] Updating aperture counts using extracted products
[Wed Dec 28 19:17:28 2011] Error reading totcts from fullrun_mos1_xmm0503600601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Dec 28 19:17:28 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 19:17:28 2011] Using photon index=1.80, rate=0.139, arf fullrun_mos1_xmm0503600601_pi300-10000_pass1_cl_src1.arf
[Wed Dec 28 19:17:28 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 19:17:28 2011] Updating source flux to 1.4e-12
[Wed Dec 28 19:17:55 2011] Reading fit data from xmm0503600601/analysis//spectral/fullrun_mos1_xmm0503600601_pi300-10000_pass1_cl_src1_pl.csv
[Wed Dec 28 19:17:55 2011] Spectral fit parameter nH value = 4.8171e+21
[Wed Dec 28 19:17:55 2011] Spectral fit parameter PhoIndex value = 4.6457
[Wed Dec 28 19:17:55 2011] Failed to get F(0.3-8.0) from xmm0503600601/analysis//spectral/fullrun_mos1_xmm0503600601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Dec 28 19:17:55 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 19:17:55 2011] Using Nh = 4.8e+21, photon index=4.65, rate=0.139, arf fullrun_mos1_xmm0503600601_pi300-10000_pass1_cl_src1.arf
[Wed Dec 28 19:17:55 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 19:17:56 2011] Updating source flux to 8.6e-13