[Fri Mar 16 20:46:08 2012] Detection parameters:
  Position = (195.0, 299.8) = 11 23 33.66 67 11 7.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 118.3 +/- 13.9
  Background counts = 9.0
  Rate = 0.01 +/- 0.001

[Fri Mar 16 20:46:09 2012] Off-axis axis estimate = 7.50'
[Fri Mar 16 22:17:34 2012] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 22:17:34 2012] Initial guess for spatial extent in simple fitting = 10.18"
[Fri Mar 16 22:17:34 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.116
[Fri Mar 16 22:17:34 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.18"
[Fri Mar 16 22:50:02 2012] fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_src5.ximg exists
[Fri Mar 16 22:50:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_src5.csv
[Fri Mar 16 22:50:02 2012] fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Mar 16 22:50:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_src5.csv
[Fri Mar 16 22:50:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 22:50:02 2012] fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Mar 16 22:50:02 2012] fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Mar 16 22:50:02 2012] Fit fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Mar 16 22:50:21 2012] Spatial fit model total counts = 203.287000, observed total counts = 204.000000
[Fri Mar 16 22:50:21 2012] Offset between fit and detection position for source 3 = 0.210354 pixels
[Fri Mar 16 22:50:21 2012] 203.821300 total counts/ 125.625000 bgd. counts: snr = 6.976670
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.210354 pixels
  Position = (195.1, 299.6) = 11 23 33.61 67 11 6.8
  Extent = 5.4 (4.3-7.8)", rotation angle = 0
  Source counts = 78.2 +/- 14.3
  Background counts = 125.6
  Rate = 0.004 +/- 0.0007
[Fri Mar 16 22:50:21 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 22:50:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 22:50:21 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 22:50:21 2012] Source does appear to be extended
[Fri Mar 16 22:50:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 17 00:10:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 17 00:10:36 2012] Initial guess for spatial extent in simple fitting = 5.39"
[Sat Mar 17 00:10:36 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.991
[Sat Mar 17 00:10:36 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 5.39"
[Sat Mar 17 00:38:44 2012] fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_src5.ximg exists
[Sat Mar 17 00:38:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_src5.csv
[Sat Mar 17 00:38:44 2012] fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Mar 17 00:38:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_src5.csv
[Sat Mar 17 00:38:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 17 00:38:45 2012] fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Mar 17 00:38:45 2012] fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Mar 17 00:38:45 2012] Fit fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Mar 17 00:38:56 2012] Spatial fit model total counts = 202.212000, observed total counts = 204.000000
[Sat Mar 17 00:38:56 2012] Offset between fit and detection position for source 3 = 0.036345 pixels
[Sat Mar 17 00:38:56 2012] 202.615800 total counts/ 124.376000 bgd. counts: snr = 7.015513
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.036345 pixels
  Position = (195.1, 299.6) = 11 23 33.59 67 11 6.9
  Extent = 5.5 (4.3-7.8)", rotation angle = 0
  Source counts = 78.2 +/- 14.2
  Background counts = 124.4
  Rate = 0.004 +/- 0.0007
[Sat Mar 17 00:38:56 2012] Vigneting correction estimate = 1.000000
[Sat Mar 17 00:38:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 17 00:38:56 2012] Assessing source extent using major axis lower bound
[Sat Mar 17 00:38:56 2012] Source does appear to be extended
[Sat Mar 17 00:38:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 17 02:16:50 2012] XMMSAS src. selection expression = ellipse(16925.688320, 26016.072400, 329.984409, 329.984409, 0.000000, X, Y)
[Sat Mar 17 02:16:50 2012] Writing source region out to fullrun_mos2_xmm0503600401_pi300-10000_pass1_cl_src3_src.reg
[Sat Mar 17 02:16:50 2012] Extracting stamp from image fullrun_mos2_xmm0503600401_pi300-10000_cl_sm2.00.img.gz, (176, 281) - (214, 319)
[Sat Mar 17 02:16:50 2012] XMMSAS bgd. selection expression = annulus(16925.688320, 26016.072400, 549.974016, 1099.948032, X, Y)
[Sat Mar 17 02:16:50 2012] Writing fullrun_mos2_xmm0503600401_pi300-10000_pass1_cl_src3.gif
[Sat Mar 17 02:17:46 2012] Mean detx,y = (9114.58, 2624.23) 
[Sat Mar 17 02:17:47 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 17 02:17:54 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 17 02:17:54 2012] Setting source spectrum file to fullrun_mos2_xmm0503600401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Mar 17 02:17:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503600401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Mar 17 02:30:00 2012] Not generating rmf since there are only 78 counts
[Sat Mar 17 02:30:00 2012] rmf not generated due to insufficient counts
[Sat Mar 17 02:32:16 2012] Updating aperture counts using extracted products
[Sat Mar 17 02:32:16 2012] Error reading totcts from fullrun_mos2_xmm0503600401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Mar 17 02:32:16 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 17 02:32:16 2012] Using photon index=1.80, rate=0.00371, arf fullrun_mos2_xmm0503600401_pi300-10000_pass1_cl_src3.arf
[Sat Mar 17 02:32:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 17 02:32:16 2012] Updating source flux to 9.1e-14
[Sat Mar 17 02:32:51 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting