[Fri Mar 16 20:46:09 2012] Detection parameters:
  Position = (409.7, 230.3) = 11 20 53.41 67 6 5.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.0 +/- 9.0
  Background counts = 9.9
  Rate = 0.003 +/- 0.0007

[Fri Mar 16 20:46:09 2012] Off-axis axis estimate = 9.46'
[Fri Mar 16 22:17:34 2012] Using EEF radius (= 11.16 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 22:17:34 2012] Initial guess for spatial extent in simple fitting = 11.16"
[Fri Mar 16 22:17:34 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.958
[Fri Mar 16 22:17:34 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 11.16"
[Fri Mar 16 22:50:02 2012] fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_src13.ximg exists
[Fri Mar 16 22:50:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_src13.csv
[Fri Mar 16 22:50:02 2012] fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Mar 16 22:50:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_src13.csv
[Fri Mar 16 22:50:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 22:50:02 2012] fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Mar 16 22:50:02 2012] fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Mar 16 22:50:02 2012] Fit fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Mar 16 22:50:21 2012] Warning, spatial fit 13 centroid is now closest to src. 20
[Fri Mar 16 22:50:21 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 22:50:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 22:50:21 2012] Assessing source extent using major
[Fri Mar 16 22:50:21 2012] Source does appear to be extended
[Fri Mar 16 22:50:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 17 00:10:36 2012] Using EEF radius (= 11.16 ")to estimate initial spatial extent for simple fitting
[Sat Mar 17 00:10:36 2012] Initial guess for spatial extent in simple fitting = 11.16"
[Sat Mar 17 00:10:36 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.958
[Sat Mar 17 00:10:36 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 11.16"
[Sat Mar 17 00:38:44 2012] fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_src13.ximg exists
[Sat Mar 17 00:38:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_src13.csv
[Sat Mar 17 00:38:44 2012] fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_src13_1.ximg exists
[Sat Mar 17 00:38:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_src13.csv
[Sat Mar 17 00:38:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 17 00:38:45 2012] fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sat Mar 17 00:38:45 2012] fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Mar 17 00:38:45 2012] Fit fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Mar 17 00:38:56 2012] Spatial fit model total counts = 129.343000, observed total counts = 128.000000
[Sat Mar 17 00:38:56 2012] Offset between fit and detection position for source 18 = 0.257313 pixels
[Sat Mar 17 00:38:56 2012] 133.387000 total counts/ 110.750000 bgd. counts: snr = 2.151033
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.257313 pixels
  Position = (409.5, 230.5) = 11 20 53.54 67 6 6.0
  Extent = 5.4 (3.6-8.2)", rotation angle = 0
  Source counts = 22.6 +/- 11.5
  Background counts = 110.8
  Rate = 0.001 +/- 0.0005
[Sat Mar 17 00:38:56 2012] Vigneting correction estimate = 1.000000
[Sat Mar 17 00:38:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 17 00:38:56 2012] Assessing source extent using major axis lower bound
[Sat Mar 17 00:38:56 2012] Source does appear to be extended
[Sat Mar 17 00:38:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 17 02:16:50 2012] XMMSAS src. selection expression = ellipse(35577.437800, 20003.219800, 324.377409, 324.377409, 0.000000, X, Y)
[Sat Mar 17 02:16:50 2012] Writing source region out to fullrun_mos2_xmm0503600401_pi300-10000_pass1_cl_src18_src.reg
[Sat Mar 17 02:16:50 2012] Extracting stamp from image fullrun_mos2_xmm0503600401_pi300-10000_cl_sm2.00.img.gz, (391, 212) - (428, 249)
[Sat Mar 17 02:16:50 2012] XMMSAS bgd. selection expression = annulus(35577.437800, 20003.219800, 540.629016, 1081.258031, X, Y) && !ellipse(35790.033295, 18983.934143, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 17 02:16:50 2012] Writing fullrun_mos2_xmm0503600401_pi300-10000_pass1_cl_src18.gif
[Sat Mar 17 02:19:40 2012] Mean detx,y = (-4648.30, -11350.33) 
[Sat Mar 17 02:19:41 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 17 02:19:48 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 17 02:19:48 2012] Setting source spectrum file to fullrun_mos2_xmm0503600401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Mar 17 02:19:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503600401_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sat Mar 17 02:31:01 2012] Not generating rmf since there are only 22 counts
[Sat Mar 17 02:31:01 2012] rmf not generated due to insufficient counts
[Sat Mar 17 02:32:16 2012] Updating aperture counts using extracted products
[Sat Mar 17 02:32:16 2012] Error reading totcts from fullrun_mos2_xmm0503600401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Mar 17 02:32:16 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 17 02:32:16 2012] Using photon index=1.80, rate=0.00107, arf fullrun_mos2_xmm0503600401_pi300-10000_pass1_cl_src18.arf
[Sat Mar 17 02:32:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 17 02:32:16 2012] Updating source flux to 2.6e-14
[Sat Mar 17 02:32:51 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting