[Fri Mar 16 20:46:09 2012] Detection parameters:
  Position = (453.2, 303.6) = 11 20 20.54 67 11 22.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.8 +/- 8.8
  Background counts = 11.4
  Rate = 0.002 +/- 0.0004

[Fri Mar 16 20:46:09 2012] Off-axis axis estimate = 11.23'
[Fri Mar 16 22:17:34 2012] Using EEF radius (= 12.04 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 22:17:34 2012] Initial guess for spatial extent in simple fitting = 12.04"
[Fri Mar 16 22:17:34 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.983
[Fri Mar 16 22:17:34 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 12.04"
[Fri Mar 16 22:50:02 2012] fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_src20.ximg exists
[Fri Mar 16 22:50:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_src20.csv
[Fri Mar 16 22:50:02 2012] fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri Mar 16 22:50:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_src20.csv
[Fri Mar 16 22:50:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 22:50:02 2012] fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri Mar 16 22:50:02 2012] fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri Mar 16 22:50:02 2012] Fit fullrun_mos2_xmm0503600401_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Fri Mar 16 22:50:21 2012] Spatial fit model total counts = 144.833000, observed total counts = 131.000000
[Fri Mar 16 22:50:21 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 16 22:50:21 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 22:50:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 22:50:21 2012] Assessing source extent using major
[Fri Mar 16 22:50:21 2012] Source does appear to be extended
[Fri Mar 16 22:50:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 17 00:10:36 2012] Using EEF radius (= 12.04 ")to estimate initial spatial extent for simple fitting
[Sat Mar 17 00:10:36 2012] Initial guess for spatial extent in simple fitting = 12.04"
[Sat Mar 17 00:10:36 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.983
[Sat Mar 17 00:10:36 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 12.04"
[Sat Mar 17 00:38:44 2012] fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_src20.ximg exists
[Sat Mar 17 00:38:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_src20.csv
[Sat Mar 17 00:38:44 2012] fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_src20_1.ximg exists
[Sat Mar 17 00:38:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_src20.csv
[Sat Mar 17 00:38:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 17 00:38:45 2012] fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sat Mar 17 00:38:45 2012] fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sat Mar 17 00:38:45 2012] Fit fullrun_mos2_xmm0503600401_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sat Mar 17 00:38:56 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 12.443139 pixels away
[Sat Mar 17 00:38:56 2012] Spatial fit model total counts = 144.998000, observed total counts = 131.000000
[Sat Mar 17 00:38:56 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Mar 17 00:38:56 2012] Vigneting correction estimate = 1.000000
[Sat Mar 17 00:38:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 17 00:38:56 2012] Assessing source extent using major
[Sat Mar 17 00:38:56 2012] Source does appear to be extended
[Sat Mar 17 00:38:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 17 02:16:50 2012] XMMSAS src. selection expression = ellipse(39379.691315, 26361.479980, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 17 02:16:50 2012] Writing source region out to fullrun_mos2_xmm0503600401_pi300-10000_pass1_cl_src15_src.reg
[Sat Mar 17 02:16:50 2012] Extracting stamp from image fullrun_mos2_xmm0503600401_pi300-10000_cl_sm2.00.img.gz, (416, 266) - (491, 341)
[Sat Mar 17 02:16:50 2012] XMMSAS bgd. selection expression = annulus(39379.691315, 26361.479980, 1087.500000, 2175.000000, X, Y) && !ellipse(37814.499560, 23751.525000, 478.076814, 478.076814, 0.000000, X, Y) && !ellipse(40386.438599, 26227.987762, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 17 02:16:50 2012] Writing fullrun_mos2_xmm0503600401_pi300-10000_pass1_cl_src15.gif
[Sat Mar 17 02:21:19 2012] Mean detx,y = (-10955.07, -7398.47) 
[Sat Mar 17 02:21:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 17 02:21:32 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 17 02:21:32 2012] Setting source spectrum file to fullrun_mos2_xmm0503600401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat Mar 17 02:21:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503600401_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sat Mar 17 02:31:33 2012] Not generating rmf since there are only 37 counts
[Sat Mar 17 02:31:33 2012] rmf not generated due to insufficient counts
[Sat Mar 17 02:32:16 2012] Updating aperture counts using extracted products
[Sat Mar 17 02:32:16 2012] Error reading totcts from fullrun_mos2_xmm0503600401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat Mar 17 02:32:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 17 02:32:17 2012] Using photon index=1.80, rate=0.00173, arf fullrun_mos2_xmm0503600401_pi300-10000_pass1_cl_src15.arf
[Sat Mar 17 02:32:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 17 02:32:17 2012] Updating source flux to 3.4e-14
[Sat Mar 17 02:32:51 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting