[Fri Apr  6 08:07:48 2012] Detection parameters:
  Position = (258.7, 302.7) = 10 2 54.70 32 40 39.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3350.6 +/- 68.7
  Background counts = 30.6
  Rate = 0.4 +/- 0.008

[Fri Apr  6 08:07:48 2012] Off-axis axis estimate = 2.89'
[Fri Apr  6 08:08:58 2012] Using EEF radius (= 7.88 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 08:08:58 2012] Initial guess for spatial extent in simple fitting = 7.88"
[Fri Apr  6 08:08:58 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.171
[Fri Apr  6 08:08:58 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.88"
[Fri Apr  6 08:27:43 2012] fullrun_pn_xmm0503600301_pi300-10000_cl_pass0_src1.ximg exists
[Fri Apr  6 08:27:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503600301_pi300-10000_cl_pass0_src1.csv
[Fri Apr  6 08:27:43 2012] fullrun_pn_xmm0503600301_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Apr  6 08:27:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503600301_pi300-10000_cl_pass0_src1.csv
[Fri Apr  6 08:27:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503600301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503600301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 08:27:43 2012] fullrun_pn_xmm0503600301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Apr  6 08:27:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503600301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Apr  6 08:27:43 2012] fullrun_pn_xmm0503600301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Apr  6 08:27:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503600301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Apr  6 08:27:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503600301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503600301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 08:45:47 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.980660 pixels away
[Fri Apr  6 08:45:47 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 08:45:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 08:45:47 2012] Assessing source extent using major
[Fri Apr  6 08:45:47 2012] Source does appear to be extended
[Fri Apr  6 08:45:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 08:45:55 2012] Using EEF radius (= 7.88 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 08:45:55 2012] Initial guess for spatial extent in simple fitting = 7.88"
[Fri Apr  6 08:45:55 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.171
[Fri Apr  6 08:45:55 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.88"
[Fri Apr  6 09:02:25 2012] fullrun_pn_xmm0503600301_pi300-10000_cl_pass1_src1.ximg exists
[Fri Apr  6 09:02:25 2012] fullrun_pn_xmm0503600301_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Apr  6 09:02:25 2012] Fit fullrun_pn_xmm0503600301_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Apr  6 09:02:25 2012] fullrun_pn_xmm0503600301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Apr  6 09:02:25 2012] fullrun_pn_xmm0503600301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Apr  6 09:02:25 2012] Fit fullrun_pn_xmm0503600301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Apr  6 09:20:58 2012] Spatial fit model total counts = 3168.890000, observed total counts = 2930.000000
[Fri Apr  6 09:20:58 2012] Offset between fit and detection position for source 1 = 0.113062 pixels
[Fri Apr  6 09:20:58 2012] 3218.650000 total counts/ 1056.930000 bgd. counts: snr = 66.493061
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.113062 pixels
  Position = (258.7, 302.6) = 10 2 54.69 32 40 38.7
  Extent = 5.3 (5.1-5.6)", rotation angle = 0
  Source counts = 2161.7 +/- 56.7
  Background counts = 1056.9
  Rate = 0.2 +/- 0.007
[Fri Apr  6 09:20:58 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 09:20:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 09:20:58 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 09:20:58 2012] Source does appear to be extended
[Fri Apr  6 09:20:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 09:21:06 2012] Counts = 2161.720000, rescaling region sizes by 2.000000
[Fri Apr  6 09:21:06 2012] XMMSAS src. selection expression = ellipse(22462.385600, 26276.371200, 641.018418, 641.018418, 0.000000, X, Y)
[Fri Apr  6 09:21:06 2012] Writing source region out to fullrun_pn_xmm0503600301_pi300-10000_pass1_cl_src1_src.reg
[Fri Apr  6 09:21:06 2012] Extracting stamp from image fullrun_pn_xmm0503600301_pi300-10000_cl_sm2.00.img.gz, (222, 266) - (296, 339)
[Fri Apr  6 09:21:06 2012] XMMSAS bgd. selection expression = annulus(22462.385600, 26276.371200, 2136.728061, 4273.456123, X, Y) && !ellipse(26922.819550, 29315.162903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25825.288849, 28900.590698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27064.032000, 28369.032000, 1155.064033, 1155.064033, 0.000000, X, Y) && !ellipse(26515.341583, 27715.584747, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Apr  6 09:21:06 2012] Writing fullrun_pn_xmm0503600301_pi300-10000_pass1_cl_src1.gif
[Fri Apr  6 09:21:11 2012] Mean detx,y = (-4262.64, 105.72) 
[Fri Apr  6 09:21:13 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Apr  6 09:21:49 2012] Binned source spectrum to 10 counts/bin
[Fri Apr  6 09:21:49 2012] Setting source spectrum file to fullrun_pn_xmm0503600301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Apr  6 09:21:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503600301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Apr  6 10:14:30 2012] Updating aperture counts using extracted products
[Fri Apr  6 10:14:30 2012] Error reading totcts from fullrun_pn_xmm0503600301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Apr  6 10:14:30 2012] Calculating source flux in energy range 0.30-8.00
[Fri Apr  6 10:14:30 2012] Using photon index=1.80, rate=0.25, arf fullrun_pn_xmm0503600301_pi300-10000_pass1_cl_src1.arf
[Fri Apr  6 10:14:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Apr  6 10:14:30 2012] Updating source flux to 8.5e-13
[Fri Apr  6 10:15:20 2012] Reading fit data from xmm0503600301/analysis//spectral/fullrun_pn_xmm0503600301_pi300-10000_pass1_cl_src1_pl.csv
[Fri Apr  6 10:15:20 2012] Spectral fit parameter nH value = 471860000000.0
[Fri Apr  6 10:15:20 2012] Spectral fit parameter PhoIndex value = 1.92173
[Fri Apr  6 10:15:20 2012] Failed to get F(0.3-8.0) from xmm0503600301/analysis//spectral/fullrun_pn_xmm0503600301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Apr  6 10:15:20 2012] Calculating source flux in energy range 0.30-8.00
[Fri Apr  6 10:15:20 2012] Using Nh = 4.7e+11, photon index=1.92, rate=0.25, arf fullrun_pn_xmm0503600301_pi300-10000_pass1_cl_src1.arf
[Fri Apr  6 10:15:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Apr  6 10:15:20 2012] Updating source flux to 7.8e-13