[Fri Apr  6 08:08:11 2012] Detection parameters:
  Position = (230.3, 482.1) = 10 3 4.55 32 53 40.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 125.3 +/- 15.6
  Background counts = 17.0
  Rate = 0.009 +/- 0.001

[Fri Apr  6 08:08:11 2012] Off-axis axis estimate = 14.20'
[Fri Apr  6 08:36:40 2012] Using EEF radius (= 13.53 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 08:36:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Apr  6 08:36:40 2012] Initial guess for spatial extent in simple fitting = 13.53"
[Fri Apr  6 08:36:40 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.074
[Fri Apr  6 08:36:40 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 13.53"
[Fri Apr  6 08:45:44 2012] fullrun_mos2_xmm0503600301_pi300-10000_cl_pass0_src5.ximg exists
[Fri Apr  6 08:45:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600301_pi300-10000_cl_pass0_src5.csv
[Fri Apr  6 08:45:44 2012] fullrun_mos2_xmm0503600301_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Apr  6 08:45:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600301_pi300-10000_cl_pass0_src5.csv
[Fri Apr  6 08:45:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503600301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503600301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 08:45:44 2012] fullrun_mos2_xmm0503600301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Apr  6 08:45:44 2012] fullrun_mos2_xmm0503600301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Apr  6 08:45:44 2012] Fit fullrun_mos2_xmm0503600301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Apr  6 08:45:49 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 16.418317 pixels away
[Fri Apr  6 08:45:49 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 08:45:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 08:45:49 2012] Assessing source extent using major
[Fri Apr  6 08:45:49 2012] Source does appear to be extended
[Fri Apr  6 08:45:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 09:11:53 2012] Using EEF radius (= 13.53 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 09:11:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Apr  6 09:11:53 2012] Initial guess for spatial extent in simple fitting = 13.53"
[Fri Apr  6 09:11:53 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.074
[Fri Apr  6 09:11:53 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 13.53"
[Fri Apr  6 09:20:55 2012] fullrun_mos2_xmm0503600301_pi300-10000_cl_pass1_src5.ximg exists
[Fri Apr  6 09:20:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600301_pi300-10000_cl_pass1_src5.csv
[Fri Apr  6 09:20:55 2012] fullrun_mos2_xmm0503600301_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Apr  6 09:20:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600301_pi300-10000_cl_pass1_src5.csv
[Fri Apr  6 09:20:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503600301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503600301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 09:20:56 2012] fullrun_mos2_xmm0503600301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Apr  6 09:20:56 2012] fullrun_mos2_xmm0503600301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Apr  6 09:20:56 2012] Fit fullrun_mos2_xmm0503600301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Apr  6 09:21:01 2012] Spatial fit model total counts = 294.118000, observed total counts = 293.000000
[Fri Apr  6 09:21:01 2012] Offset between fit and detection position for source 10 = 0.555704 pixels
[Fri Apr  6 09:21:01 2012] 290.628700 total counts/ 205.080000 bgd. counts: snr = 5.973815
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.555704 pixels
  Position = (230.8, 482.2) = 10 3 4.36 32 53 40.1
  Extent = 7.8 (6.0-13.6)", rotation angle = 0
  Source counts = 85.5 +/- 17.0
  Background counts = 205.1
  Rate = 0.008 +/- 0.002
[Fri Apr  6 09:21:01 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 09:21:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 09:21:01 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 09:21:01 2012] Source does appear to be extended
[Fri Apr  6 09:21:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 10:02:49 2012] XMMSAS src. selection expression = ellipse(20034.965800, 41905.505800, 466.167013, 466.167013, 0.000000, X, Y)
[Fri Apr  6 10:02:49 2012] Writing source region out to fullrun_mos2_xmm0503600301_pi300-10000_pass1_cl_src10_src.reg
[Fri Apr  6 10:02:49 2012] Extracting stamp from image fullrun_mos2_xmm0503600301_pi300-10000_cl_sm2.00.img.gz, (204, 455) - (258, 509)
[Fri Apr  6 10:02:49 2012] XMMSAS bgd. selection expression = annulus(20034.965800, 41905.505800, 776.945022, 1553.890045, X, Y)
[Fri Apr  6 10:02:49 2012] Writing fullrun_mos2_xmm0503600301_pi300-10000_pass1_cl_src10.gif
[Fri Apr  6 10:03:50 2012] Mean detx,y = (2236.10, 15399.93) 
[Fri Apr  6 10:03:51 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Apr  6 10:04:01 2012] Binned source spectrum to 10 counts/bin
[Fri Apr  6 10:04:01 2012] Setting source spectrum file to fullrun_mos2_xmm0503600301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Apr  6 10:04:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503600301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Apr  6 10:13:12 2012] Not generating rmf since there are only 85 counts
[Fri Apr  6 10:13:12 2012] rmf not generated due to insufficient counts
[Fri Apr  6 10:14:31 2012] Updating aperture counts using extracted products
[Fri Apr  6 10:14:31 2012] Error reading totcts from fullrun_mos2_xmm0503600301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Apr  6 10:14:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Apr  6 10:14:31 2012] Using photon index=1.80, rate=0.00756, arf fullrun_mos2_xmm0503600301_pi300-10000_pass1_cl_src10.arf
[Fri Apr  6 10:14:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Apr  6 10:14:31 2012] Updating source flux to 2.7e-13
[Fri Apr  6 10:14:45 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting