[Wed Nov 23 23:08:10 2011] Detection parameters:
  Position = (278.0, 268.4) = 7 46 41.21 31 0 5.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.3 +/- 14.6
  Background counts = 47.2
  Rate = 0.01 +/- 0.002

[Wed Nov 23 23:08:10 2011] Off-axis axis estimate = 2.63'
[Wed Nov 23 23:09:16 2011] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Wed Nov 23 23:09:16 2011] Initial guess for spatial extent in simple fitting = 7.75"
[Wed Nov 23 23:09:16 2011] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.865
[Wed Nov 23 23:09:16 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 7.75"
[Wed Nov 23 23:51:15 2011] fullrun_pn_xmm0503600201_pi300-10000_cl_pass0_src20.ximg exists
[Wed Nov 23 23:51:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503600201_pi300-10000_cl_pass0_src20.csv
[Wed Nov 23 23:51:15 2011] fullrun_pn_xmm0503600201_pi300-10000_cl_pass0_src20_1.ximg exists
[Wed Nov 23 23:51:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503600201_pi300-10000_cl_pass0_src20.csv
[Wed Nov 23 23:51:15 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503600201_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503600201_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 23 23:51:15 2011] fullrun_pn_xmm0503600201_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Wed Nov 23 23:51:15 2011] fullrun_pn_xmm0503600201_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Wed Nov 23 23:51:15 2011] Fit fullrun_pn_xmm0503600201_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Thu Nov 24 00:32:38 2011] Spatial fit model total counts = 747.710000, observed total counts = 751.000000
[Thu Nov 24 00:32:38 2011] Offset between fit and detection position for source 20 = 3.031658 pixels
[Thu Nov 24 00:32:38 2011] 708.231000 total counts/ 533.767000 bgd. counts: snr = 7.551443
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 3.031658 pixels
  Position = (275.0, 268.2) = 7 46 42.24 31 0 12.5
  Extent = 12.3 (9.2-15.5)", rotation angle = 0
  Source counts = 174.5 +/- 26.6
  Background counts = 533.8
  Rate = 0.02 +/- 0.002
[Thu Nov 24 00:32:38 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 00:32:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 00:32:38 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 00:32:38 2011] Source does appear to be extended
[Thu Nov 24 00:32:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 00:32:38 2011] Source is confused with source 6
[Thu Nov 24 00:32:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Nov 24 00:32:48 2011] Initial guess for spatial extent in simple fitting = 12.28"
[Thu Nov 24 00:32:48 2011] source mask rpix=2.8, npix_max = 44, mask sum = 38, frac = 0.861
[Thu Nov 24 00:32:48 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 12.28"
[Thu Nov 24 01:19:42 2011] fullrun_pn_xmm0503600201_pi300-10000_cl_pass1_src19.ximg exists
[Thu Nov 24 01:19:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503600201_pi300-10000_cl_pass1_src19.csv
[Thu Nov 24 01:19:42 2011] fullrun_pn_xmm0503600201_pi300-10000_cl_pass1_src19_1.ximg exists
[Thu Nov 24 01:19:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503600201_pi300-10000_cl_pass1_src19.csv
[Thu Nov 24 01:19:42 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503600201_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503600201_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 01:19:43 2011] fullrun_pn_xmm0503600201_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Thu Nov 24 01:19:43 2011] fullrun_pn_xmm0503600201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Thu Nov 24 01:19:43 2011] Fit fullrun_pn_xmm0503600201_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Thu Nov 24 02:01:46 2011] Warning, spatial fit 19 centroid is now closest to src. 18
[Thu Nov 24 02:01:46 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 02:01:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 02:01:46 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 02:01:46 2011] Source does appear to be extended
[Thu Nov 24 02:01:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 02:01:59 2011] XMMSAS src. selection expression = ellipse(23874.512000, 23285.924800, 736.644021, 736.644021, 0.000000, X, Y)
[Thu Nov 24 02:01:59 2011] Writing source region out to fullrun_pn_xmm0503600201_pi300-10000_pass1_cl_src20_src.reg
[Thu Nov 24 02:01:59 2011] Extracting stamp from image fullrun_pn_xmm0503600201_pi300-10000_cl_sm2.00.img.gz, (233, 226) - (317, 311)
[Thu Nov 24 02:01:59 2011] XMMSAS bgd. selection expression = annulus(23874.512000, 23285.924800, 1227.740035, 2455.480071, X, Y) && !ellipse(23915.332860, 22453.114800, 1092.440031, 490.659214, 355.081340, X, Y) && !ellipse(23977.648651, 24025.922394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23200.881800, 23151.948000, 1278.752037, 1278.752037, 0.000000, X, Y) && !ellipse(22648.006800, 23098.116000, 694.957620, 694.957620, 0.000000, X, Y) && !ellipse(23567.221400, 23089.200400, 476.560814, 476.560814, 0.000000, X, Y) && !ellipse(23415.281200, 22311.274200, 645.044019, 645.044019, 0.000000, X, Y)
[Thu Nov 24 02:01:59 2011] Writing fullrun_pn_xmm0503600201_pi300-10000_pass1_cl_src20.gif
[Thu Nov 24 02:10:43 2011] Mean detx,y = (1551.46, -635.71) 
[Thu Nov 24 02:10:46 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 02:11:16 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 02:11:16 2011] Setting source spectrum file to fullrun_pn_xmm0503600201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Nov 24 02:11:16 2011] Setting bgd. spectrum file to fullrun_pn_xmm0503600201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Thu Nov 24 03:26:42 2011] Updating aperture counts using extracted products
[Thu Nov 24 03:26:42 2011] Error reading totcts from fullrun_pn_xmm0503600201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Nov 24 03:26:43 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 03:26:43 2011] Using photon index=1.80, rate=0.0158, arf fullrun_pn_xmm0503600201_pi300-10000_pass1_cl_src20.arf
[Thu Nov 24 03:26:43 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 03:26:43 2011] Updating source flux to 4.1e-14
[Thu Nov 24 03:26:49 2011] Flag c found in src. 20 procflags, skipping spectral fitting