[Wed Nov 23 23:08:35 2011] Detection parameters:
  Position = (179.7, 181.0) = 7 47 14.43 30 53 53.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.5 +/- 9.0
  Background counts = 4.7
  Rate = 0.005 +/- 0.0008

[Wed Nov 23 23:08:35 2011] Off-axis axis estimate = 12.11'
[Thu Nov 24 00:14:19 2011] Using EEF radius (= 12.48 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 00:14:19 2011] Initial guess for spatial extent in simple fitting = 12.48"
[Thu Nov 24 00:14:19 2011] source mask rpix=2.9, npix_max = 45, mask sum = 40, frac = 0.881
[Thu Nov 24 00:14:19 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 12.48"
[Thu Nov 24 00:32:33 2011] fullrun_mos2_xmm0503600201_pi300-10000_cl_pass0_src6.ximg exists
[Thu Nov 24 00:32:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600201_pi300-10000_cl_pass0_src6.csv
[Thu Nov 24 00:32:33 2011] fullrun_mos2_xmm0503600201_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Nov 24 00:32:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600201_pi300-10000_cl_pass0_src6.csv
[Thu Nov 24 00:32:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503600201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503600201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 00:32:33 2011] fullrun_mos2_xmm0503600201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Nov 24 00:32:33 2011] fullrun_mos2_xmm0503600201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Nov 24 00:32:33 2011] Fit fullrun_mos2_xmm0503600201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Thu Nov 24 00:32:42 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.914696 pixels away
[Thu Nov 24 00:32:42 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 00:32:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 00:32:42 2011] Assessing source extent using major
[Thu Nov 24 00:32:42 2011] Source does appear to be extended
[Thu Nov 24 00:32:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 01:46:45 2011] Using EEF radius (= 12.48 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 01:46:45 2011] Initial guess for spatial extent in simple fitting = 12.48"
[Thu Nov 24 01:46:45 2011] source mask rpix=2.9, npix_max = 45, mask sum = 40, frac = 0.881
[Thu Nov 24 01:46:45 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 12.48"
[Thu Nov 24 02:01:40 2011] fullrun_mos2_xmm0503600201_pi300-10000_cl_pass1_src6.ximg exists
[Thu Nov 24 02:01:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600201_pi300-10000_cl_pass1_src6.csv
[Thu Nov 24 02:01:40 2011] fullrun_mos2_xmm0503600201_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Nov 24 02:01:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600201_pi300-10000_cl_pass1_src6.csv
[Thu Nov 24 02:01:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503600201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503600201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 02:01:41 2011] fullrun_mos2_xmm0503600201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Nov 24 02:01:41 2011] fullrun_mos2_xmm0503600201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Nov 24 02:01:41 2011] Fit fullrun_mos2_xmm0503600201_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Thu Nov 24 02:01:51 2011] Spatial fit model total counts = 102.933000, observed total counts = 102.000000
[Thu Nov 24 02:01:51 2011] Offset between fit and detection position for source 3 = 0.110525 pixels
[Thu Nov 24 02:01:51 2011] 105.541700 total counts/ 71.437600 bgd. counts: snr = 4.034997
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.110525 pixels
  Position = (179.8, 181.0) = 7 47 14.39 30 53 52.9
  Extent = 3.4 (3.1-4.5)", rotation angle = 0
  Source counts = 34.1 +/- 10.3
  Background counts = 71.4
  Rate = 0.003 +/- 0.0009
[Thu Nov 24 02:01:51 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 02:01:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 02:01:51 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 02:01:51 2011] Source does appear to be extended
[Thu Nov 24 02:01:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 03:15:45 2011] XMMSAS src. selection expression = ellipse(15594.516000, 15700.215400, 202.771206, 202.771206, 0.000000, X, Y)
[Thu Nov 24 03:15:45 2011] Writing source region out to fullrun_mos2_xmm0503600201_pi300-10000_pass1_cl_src3_src.reg
[Thu Nov 24 03:15:45 2011] Extracting stamp from image fullrun_mos2_xmm0503600201_pi300-10000_cl_sm2.00.img.gz, (168, 169) - (191, 193)
[Thu Nov 24 03:15:45 2011] XMMSAS bgd. selection expression = annulus(15594.516000, 15700.215400, 337.952010, 675.904019, X, Y)
[Thu Nov 24 03:15:45 2011] Writing fullrun_mos2_xmm0503600201_pi300-10000_pass1_cl_src3.gif
[Thu Nov 24 03:16:50 2011] Mean detx,y = (-11002.42, 6256.29) 
[Thu Nov 24 03:16:51 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 03:17:01 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 03:17:02 2011] Setting source spectrum file to fullrun_mos2_xmm0503600201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Nov 24 03:17:02 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503600201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Nov 24 03:26:13 2011] Not generating rmf since there are only 34 counts
[Thu Nov 24 03:26:13 2011] rmf not generated due to insufficient counts
[Thu Nov 24 03:26:43 2011] Updating aperture counts using extracted products
[Thu Nov 24 03:26:43 2011] Error reading totcts from fullrun_mos2_xmm0503600201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Nov 24 03:26:43 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 03:26:43 2011] Using photon index=1.80, rate=0.003, arf fullrun_mos2_xmm0503600201_pi300-10000_pass1_cl_src3.arf
[Thu Nov 24 03:26:43 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 03:26:43 2011] Updating source flux to 1.1e-13
[Thu Nov 24 03:26:45 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting