[Wed Nov 23 23:08:35 2011] Detection parameters:
  Position = (267.8, 265.0) = 7 46 44.65 30 59 54.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.6 +/- 11.6
  Background counts = 15.4
  Rate = 0.005 +/- 0.001

[Wed Nov 23 23:08:35 2011] Off-axis axis estimate = 3.29'
[Thu Nov 24 00:14:19 2011] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 00:14:19 2011] Initial guess for spatial extent in simple fitting = 8.07"
[Thu Nov 24 00:14:19 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.901
[Thu Nov 24 00:14:19 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 8.07"
[Thu Nov 24 00:32:33 2011] fullrun_mos2_xmm0503600201_pi300-10000_cl_pass0_src7.ximg exists
[Thu Nov 24 00:32:33 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0503600201_pi300-10000_cl_pass0_src7.csv
[Thu Nov 24 00:32:33 2011] fullrun_mos2_xmm0503600201_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Nov 24 00:32:33 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0503600201_pi300-10000_cl_pass0_src7.csv
[Thu Nov 24 00:32:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503600201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503600201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 00:32:33 2011] fullrun_mos2_xmm0503600201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Nov 24 00:32:33 2011] fullrun_mos2_xmm0503600201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Nov 24 00:32:33 2011] Fit fullrun_mos2_xmm0503600201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Thu Nov 24 00:32:42 2011] Warning, spatial fit 7 centroid is now closest to src. 9
[Thu Nov 24 00:32:42 2011] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 13.639828 pixels away
[Thu Nov 24 00:32:42 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 00:32:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 00:32:42 2011] Assessing source extent using major
[Thu Nov 24 00:32:42 2011] Source does appear to be extended
[Thu Nov 24 00:32:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 00:32:42 2011] Source is confused with source 6
[Thu Nov 24 01:46:45 2011] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 01:46:45 2011] Initial guess for spatial extent in simple fitting = 8.07"
[Thu Nov 24 01:46:45 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.901
[Thu Nov 24 01:46:45 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 8.07"
[Thu Nov 24 02:01:40 2011] fullrun_mos2_xmm0503600201_pi300-10000_cl_pass1_src7.ximg exists
[Thu Nov 24 02:01:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600201_pi300-10000_cl_pass1_src7.csv
[Thu Nov 24 02:01:40 2011] fullrun_mos2_xmm0503600201_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu Nov 24 02:01:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503600201_pi300-10000_cl_pass1_src7.csv
[Thu Nov 24 02:01:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503600201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503600201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 02:01:41 2011] fullrun_mos2_xmm0503600201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu Nov 24 02:01:41 2011] fullrun_mos2_xmm0503600201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu Nov 24 02:01:41 2011] Fit fullrun_mos2_xmm0503600201_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Thu Nov 24 02:01:51 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 12.594599 pixels away
[Thu Nov 24 02:01:51 2011] Source 11 is offset by 6.041950 and -6.933247 pixels which is larger than
2 X fitted extent = 3.283770 x 3.283770, not incorporating fit results
[Thu Nov 24 02:01:51 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 02:01:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 02:01:51 2011] Assessing source extent using major
[Thu Nov 24 02:01:51 2011] Source does appear to be extended
[Thu Nov 24 02:01:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 03:15:45 2011] XMMSAS src. selection expression = ellipse(23252.379608, 23004.033478, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Nov 24 03:15:45 2011] Writing source region out to fullrun_mos2_xmm0503600201_pi300-10000_pass1_cl_src11_src.reg
[Thu Nov 24 03:15:45 2011] Extracting stamp from image fullrun_mos2_xmm0503600201_pi300-10000_cl_sm2.00.img.gz, (230, 227) - (305, 302)
[Thu Nov 24 03:15:45 2011] XMMSAS bgd. selection expression = annulus(23252.379608, 23004.033478, 1087.500000, 2175.000000, X, Y) && !ellipse(23755.029400, 22364.402000, 1299.168037, 1299.168037, 0.000000, X, Y) && !ellipse(23796.320770, 22987.874969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23325.990295, 22389.128693, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Nov 24 03:15:45 2011] Writing fullrun_mos2_xmm0503600201_pi300-10000_pass1_cl_src11.gif
[Thu Nov 24 03:17:03 2011] Mean detx,y = (-1971.24, 718.72) 
[Thu Nov 24 03:17:04 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 03:17:09 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 03:17:09 2011] Setting source spectrum file to fullrun_mos2_xmm0503600201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Nov 24 03:17:09 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503600201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Nov 24 03:26:14 2011] Not generating rmf since there are only 50 counts
[Thu Nov 24 03:26:14 2011] rmf not generated due to insufficient counts
[Thu Nov 24 03:26:43 2011] Updating aperture counts using extracted products
[Thu Nov 24 03:26:43 2011] Error reading totcts from fullrun_mos2_xmm0503600201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Nov 24 03:26:43 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 03:26:43 2011] Using photon index=1.80, rate=0.00452, arf fullrun_mos2_xmm0503600201_pi300-10000_pass1_cl_src11.arf
[Thu Nov 24 03:26:43 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 03:26:43 2011] Updating source flux to 4.5e-14
[Thu Nov 24 03:26:45 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting