[Sat Mar 10 11:22:51 2012] Detection parameters:
  Position = (322.2, 319.8) = 4 13 14.01 28 19 10.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 296.1 +/- 24.0
  Background counts = 72.7
  Rate = 0.01 +/- 0.001

[Sat Mar 10 11:22:51 2012] Off-axis axis estimate = 2.32'
[Sat Mar 10 12:28:58 2012] Using EEF radius (= 7.59 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 12:28:58 2012] Initial guess for spatial extent in simple fitting = 7.59"
[Sat Mar 10 12:28:58 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.794
[Sat Mar 10 12:28:58 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.59"
[Sat Mar 10 12:47:16 2012] fullrun_mos2_xmm0503590301_pi300-10000_cl_pass0_src3.ximg exists
[Sat Mar 10 12:47:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503590301_pi300-10000_cl_pass0_src3.csv
[Sat Mar 10 12:47:16 2012] fullrun_mos2_xmm0503590301_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Mar 10 12:47:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503590301_pi300-10000_cl_pass0_src3.csv
[Sat Mar 10 12:47:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503590301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503590301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 12:47:16 2012] fullrun_mos2_xmm0503590301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Mar 10 12:47:16 2012] fullrun_mos2_xmm0503590301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Mar 10 12:47:16 2012] Fit fullrun_mos2_xmm0503590301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Mar 10 12:47:26 2012] Source 5 is offset by 7.216985 and 5.820378 pixels which is larger than
2 X fitted extent = 0.872294 x 0.872294, not incorporating fit results
[Sat Mar 10 12:47:26 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 12:47:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 12:47:26 2012] Assessing source extent using major
[Sat Mar 10 12:47:26 2012] Source does appear to be extended
[Sat Mar 10 12:47:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 13:46:13 2012] Using EEF radius (= 7.59 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 13:46:13 2012] Initial guess for spatial extent in simple fitting = 7.59"
[Sat Mar 10 13:46:13 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.794
[Sat Mar 10 13:46:13 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.59"
[Sat Mar 10 13:54:30 2012] fullrun_mos2_xmm0503590301_pi300-10000_cl_pass1_src3.ximg exists
[Sat Mar 10 13:54:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503590301_pi300-10000_cl_pass1_src3.csv
[Sat Mar 10 13:54:30 2012] fullrun_mos2_xmm0503590301_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Mar 10 13:54:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503590301_pi300-10000_cl_pass1_src3.csv
[Sat Mar 10 13:54:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503590301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503590301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 13:54:30 2012] fullrun_mos2_xmm0503590301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Mar 10 13:54:30 2012] fullrun_mos2_xmm0503590301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Mar 10 13:54:30 2012] Fit fullrun_mos2_xmm0503590301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Mar 10 13:54:39 2012] Spatial fit model total counts = 446.999000, observed total counts = 447.000000
[Sat Mar 10 13:54:39 2012] Offset between fit and detection position for source 5 = 0.035048 pixels
[Sat Mar 10 13:54:39 2012] 448.230000 total counts/ 322.237000 bgd. counts: snr = 7.018733
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.035048 pixels
  Position = (322.3, 319.9) = 4 13 14.00 28 19 10.6
  Extent = 3.8 (3.3-4.6)", rotation angle = 0
  Source counts = 126.0 +/- 21.2
  Background counts = 322.2
  Rate = 0.007 +/- 0.001
[Sat Mar 10 13:54:39 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 13:54:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 13:54:39 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 13:54:39 2012] Source does appear to be extended
[Sat Mar 10 13:54:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 14:48:18 2012] XMMSAS src. selection expression = ellipse(27989.039800, 27779.007200, 229.294394, 229.294394, 0.000000, X, Y)
[Sat Mar 10 14:48:18 2012] Writing source region out to fullrun_mos2_xmm0503590301_pi300-10000_pass1_cl_src5_src.reg
[Sat Mar 10 14:48:18 2012] Extracting stamp from image fullrun_mos2_xmm0503590301_pi300-10000_cl_sm2.00.img.gz, (309, 307) - (335, 333)
[Sat Mar 10 14:48:18 2012] XMMSAS bgd. selection expression = annulus(27989.039800, 27779.007200, 382.157323, 764.314645, X, Y)
[Sat Mar 10 14:48:18 2012] Writing fullrun_mos2_xmm0503590301_pi300-10000_pass1_cl_src5.gif
[Sat Mar 10 14:50:16 2012] Mean detx,y = (2824.19, -3869.19) 
[Sat Mar 10 14:50:19 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 14:50:32 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 14:50:32 2012] Setting source spectrum file to fullrun_mos2_xmm0503590301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Mar 10 14:50:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503590301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Mar 10 15:07:30 2012] Updating aperture counts using extracted products
[Sat Mar 10 15:07:30 2012] Error reading totcts from fullrun_mos2_xmm0503590301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Mar 10 15:07:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 15:07:30 2012] Using photon index=1.80, rate=0.00737, arf fullrun_mos2_xmm0503590301_pi300-10000_pass1_cl_src5.arf
[Sat Mar 10 15:07:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 15:07:31 2012] Updating source flux to 1e-13
[Sat Mar 10 15:08:21 2012] Flag b found in src. 5 procflags, skipping spectral fitting