[Fri Mar 16 10:20:40 2012] Detection parameters:
  Position = (277.1, 382.1) = 16 3 17.71 -40 13 53.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.3 +/- 7.7
  Background counts = 9.2
  Rate = 0.002 +/- 0.0006

[Fri Mar 16 10:20:40 2012] Off-axis axis estimate = 6.26'
[Fri Mar 16 10:52:19 2012] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 10:52:19 2012] Initial guess for spatial extent in simple fitting = 9.56"
[Fri Mar 16 10:52:19 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.237
[Fri Mar 16 10:52:19 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.56"
[Fri Mar 16 11:02:57 2012] fullrun_mos1_xmm0503590101_pi300-10000_cl_pass0_src5.ximg exists
[Fri Mar 16 11:02:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503590101_pi300-10000_cl_pass0_src5.csv
[Fri Mar 16 11:02:57 2012] fullrun_mos1_xmm0503590101_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Mar 16 11:02:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503590101_pi300-10000_cl_pass0_src5.csv
[Fri Mar 16 11:02:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503590101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503590101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 11:02:58 2012] fullrun_mos1_xmm0503590101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Mar 16 11:02:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503590101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Mar 16 11:02:58 2012] fullrun_mos1_xmm0503590101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Mar 16 11:02:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503590101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Mar 16 11:02:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503590101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503590101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 11:10:43 2012] Source 5 is offset by -3.311243 and 7.844840 pixels which is larger than
2 X fitted extent = 1.488938 x 1.488938, not incorporating fit results
[Fri Mar 16 11:10:43 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 11:10:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 11:10:43 2012] Assessing source extent using major
[Fri Mar 16 11:10:43 2012] Source does appear to be extended
[Fri Mar 16 11:10:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 11:10:43 2012] Deleting source due to low Poisson probability 1.0