[Tue Feb 14 15:33:25 2012] Detection parameters:
  Position = (351.1, 277.1) = 5 34 30.22 -6 22 1.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 350.7 +/- 27.3
  Background counts = 81.0
  Rate = 0.01 +/- 0.0008

[Tue Feb 14 15:33:26 2012] Off-axis axis estimate = 4.12'
[Tue Feb 14 15:36:54 2012] Using EEF radius (= 8.49 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 15:36:54 2012] Initial guess for spatial extent in simple fitting = 8.49"
[Tue Feb 14 15:36:54 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.040
[Tue Feb 14 15:36:54 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 8.49"
[Tue Feb 14 18:34:17 2012] fullrun_pn_xmm0503560701_pi300-10000_cl_pass0_src73.ximg exists
[Tue Feb 14 18:34:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503560701_pi300-10000_cl_pass0_src73.csv
[Tue Feb 14 18:34:17 2012] fullrun_pn_xmm0503560701_pi300-10000_cl_pass0_src73_1.ximg exists
[Tue Feb 14 18:34:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503560701_pi300-10000_cl_pass0_src73.csv
[Tue Feb 14 18:34:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503560701_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503560701_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 18:34:18 2012] fullrun_pn_xmm0503560701_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Tue Feb 14 18:34:18 2012] fullrun_pn_xmm0503560701_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Tue Feb 14 18:34:18 2012] Fit fullrun_pn_xmm0503560701_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Tue Feb 14 21:56:57 2012] Spatial fit model total counts = 1243.570000, observed total counts = 1237.000000
[Tue Feb 14 21:56:57 2012] Offset between fit and detection position for source 81 = 1.162048 pixels
[Tue Feb 14 21:56:57 2012] Warning, changing simple spatial fit ID from 73 to 15
[Tue Feb 14 21:56:57 2012] 1288.961900 total counts/ 1264.630000 bgd. counts: snr = 0.684218
Spatial fit parameters:
  Offset between fit and detection position for source 81 = 1.162048 pixels
  Position = (352.3, 276.8) = 5 34 29.89 -6 22 5.0
  Extent = 5.0 (2.2-8.4)", rotation angle = 0
  Source counts = 24.3 +/- 35.9
  Background counts = 1264.6
  Rate = 0.0005 +/- 0.0007
  Deleting source due to low Poisson probability