[Tue Feb 14 15:33:32 2012] Detection parameters:
  Position = (182.6, 246.0) = 5 35 19.39 -6 24 15.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.1 +/- 13.1
  Background counts = 20.1
  Rate = 0.002 +/- 0.0004

[Tue Feb 14 15:33:32 2012] Off-axis axis estimate = 9.22'
[Tue Feb 14 20:10:32 2012] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 20:10:32 2012] Initial guess for spatial extent in simple fitting = 11.04"
[Tue Feb 14 20:10:32 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.976
[Tue Feb 14 20:10:32 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 11.04"
[Tue Feb 14 21:56:40 2012] fullrun_mos2_xmm0503560701_pi300-10000_cl_pass0_src55.ximg exists
[Tue Feb 14 21:56:40 2012] fullrun_mos2_xmm0503560701_pi300-10000_cl_pass0_src55_1.ximg exists
[Tue Feb 14 21:56:40 2012] Fit fullrun_mos2_xmm0503560701_pi300-10000_cl_pass0_src55 appears to have run properly
[Tue Feb 14 21:56:41 2012] fullrun_mos2_xmm0503560701_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Tue Feb 14 21:56:41 2012] fullrun_mos2_xmm0503560701_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Tue Feb 14 21:56:41 2012] Fit fullrun_mos2_xmm0503560701_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Tue Feb 14 21:57:22 2012] Spatial fit model total counts = 494.466000, observed total counts = 488.000000
[Tue Feb 14 21:57:22 2012] Offset between fit and detection position for source 67 = 9.585094 pixels
[Tue Feb 14 21:57:22 2012] 489.506000 total counts/ 237.554000 bgd. counts: snr = 16.346946
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 9.585094 pixels
  Position = (176.9, 253.7) = 5 35 21.07 -6 23 45.4
  Extent = 22.1 (20.4-44.1)", rotation angle = 0
  Source counts = 252.0 +/- 22.1
  Background counts = 237.6
  Rate = 0.005 +/- 0.0004
[Tue Feb 14 21:57:22 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 21:57:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 21:57:22 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 21:57:22 2012] Source does appear to be extended
[Tue Feb 14 21:57:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 02:22:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 15 02:22:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 15 02:22:17 2012] Initial guess for spatial extent in simple fitting = 22.07"
[Wed Feb 15 02:22:17 2012] source mask rpix=5.1, npix_max = 124, mask sum = 121, frac = 0.974
[Wed Feb 15 02:22:17 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 22.07"
[Wed Feb 15 03:54:42 2012] fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_src54.ximg exists
[Wed Feb 15 03:54:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_src54.csv
[Wed Feb 15 03:54:42 2012] fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_src54_1.ximg exists
[Wed Feb 15 03:54:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_src54.csv
[Wed Feb 15 03:54:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 03:54:43 2012] fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Wed Feb 15 03:54:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_tfrozen_src54.csv
[Wed Feb 15 03:54:43 2012] fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Wed Feb 15 03:54:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_tfrozen_src54.csv
[Wed Feb 15 03:54:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503560701_pi300-10000_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 03:55:23 2012] Warning: source 54 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 67 at 14.408604 pixels away
[Wed Feb 15 03:55:24 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 03:55:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 03:55:24 2012] Assessing source extent using major axis lower bound
[Wed Feb 15 03:55:24 2012] Source does appear to be extended
[Wed Feb 15 03:55:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 10:35:56 2012] XMMSAS src. selection expression = ellipse(15339.860000, 22019.238000, 1324.386038, 1324.386038, 0.000000, X, Y)
[Wed Feb 15 10:35:56 2012] Writing source region out to fullrun_mos2_xmm0503560701_pi300-10000_pass1_cl_src67_src.reg
[Wed Feb 15 10:35:56 2012] Extracting stamp from image fullrun_mos2_xmm0503560701_pi300-10000_cl_sm2.00.img.gz, (101, 178) - (253, 330)
[Wed Feb 15 10:35:56 2012] XMMSAS bgd. selection expression = annulus(15339.860000, 22019.238000, 2207.310064, 4414.620127, X, Y) && !ellipse(16326.261900, 20952.371000, 408.430412, 408.430412, 0.000000, X, Y) && !ellipse(14963.500275, 25628.649414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13596.958023, 18379.356094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10476.303627, 22392.235077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15932.401443, 24169.710815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19700.631961, 26746.915800, 335.192810, 335.192810, 0.000000, X, Y) && !ellipse(19949.564760, 25491.618800, 288.249608, 254.632007, 338.958790, X, Y) && !ellipse(18340.941400, 26205.225400, 317.947209, 317.947209, 0.000000, X, Y) && !ellipse(16002.856628, 17559.025055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13107.426376, 18056.042557, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Feb 15 10:35:56 2012] Writing fullrun_mos2_xmm0503560701_pi300-10000_pass1_cl_src67.gif
[Wed Feb 15 10:54:15 2012] Mean detx,y = (-8765.27, 3480.54) 
[Wed Feb 15 10:54:16 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 15 10:55:38 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 15 10:55:38 2012] Setting source spectrum file to fullrun_mos2_xmm0503560701_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Wed Feb 15 10:55:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503560701_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Wed Feb 15 12:21:21 2012] Updating aperture counts using extracted products
[Wed Feb 15 12:21:21 2012] Error reading totcts from fullrun_mos2_xmm0503560701_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Wed Feb 15 12:21:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 15 12:21:22 2012] Using photon index=1.80, rate=0.00452, arf fullrun_mos2_xmm0503560701_pi300-10000_pass1_cl_src67.arf
[Wed Feb 15 12:21:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 15 12:21:22 2012] Updating source flux to 6.6e-14